TACTICAL EVO - Hlavní strana

Příslušenství pro zbraně, outdoor, lov a střelbu

Showing 1-174 of 174 item(s)

IN-LINE Buttstock reduction for SA vz.58

IN-LINE Buttstock reduction for SA vz.58 2

Submachine gun SA 58 (vz 58, 585 etc.)

IN-LINE Buttstock reduction for SA vz.58

Weaver mounting buttstock reduction system for SA vz. 58 and its clones. This reduction is designed specifically to use with our product: Weaver mount for SA vz. 58 and will allow you to quickly change the lock system of your buttstock. Available variants are mounting locks for FAB Defense, AR-style buffer, Zhukov Yugo style, or the original wooden and...

View

Weaver mounting on SA 58 (vz.58) with stock in IN-LINE...

Weaver mounting on SA 58 (vz.58) with stock in IN-LINE... 2

Submachine gun SA 58 (vz 58, 585 etc.)

Weaver mounting on SA 58 (vz.58) with stock in IN-LINE design

Weaver mounting on SA submachine gun vz. 58 is currently a necessary accessory for every shooter who is really serious about shooting from this iconic Czechoslovak self-loading assault rifle. Submachine gun vz. 58 was a great weapon for its time and for its design qualities it serves in the armed forces to this day. As for its popularity among civilian...

View

WEAVER rail for Sig Sauer SSG 300

WEAVER rail for Sig Sauer SSG 300 2

Tuning

WEAVER rail (picatinny) for Sig Sauer SSG 3000

Precisely made WEAVER rail (set) designed to attach to the stock of the Sig Sauer SSG 3000 rifle.Sig Sauer SSG 3000 is a great weapon designed for accurate shooting at long distances, but the stock unfortunately does not have at the bottom of the rail WEAVER. There are only two screws of the SWIVEL system, which is not an optimal.Our WEAVER kit eliminates...

View

Bipod F-Class F1 3,5-8" (WEAVER)

Bipod F-Class F1 3,5-8" (WEAVER) 2

Bipods

Bipod F-Class F1 3,5-8" (WEAVER)

The high-quality and extremely accurate workshop-processed bipod F-Class F1 (WEAVER) is the best choice for every long range shooter.Bipod F-Class F1 is made of high-quality air duralumin and the overall product processing is at very high level. Individual parts are milled on modern CNC machines, ensuring maximum accuracy and production quality. The...

View

Rangefinder TE 2000m

Rangefinder TE 2000m 2

Rangefinders

Rangefinder TE 2000m

The TE 2000 rangefinder is one of the most powerful range finders on the market with a significant price, quality and performance ratio. The rangefinder has a very high-quality image, excellent workmanship and good mechanical resistance. Thanks to its construction, it is dustproof and waterproof at the same time. The rangefinder is easy to operate with...

View

Bipod F-Class F1 3,5-8" LOCK system (WEAVER)

Bipod F-Class F1 3,5-8" LOCK system (WEAVER) 2

Bipods

Bipod F-Class F1 3,5-8" LOCK system (WEAVER)

The high-quality and extremely accurate workshop-processed bipod F-Class F1 LOCK (WEAVER) is the best choice for every long range shooter. The F-Class F1 LOCK bipod differs from the standard F-Class F1 bipod by the LOCK system. This will prevent the bipod from being released from the weaver. This can occur due to a small tightening of the locking lever or...

View

Muzzle brake with high efficiency M18x1

Muzzle brake with high efficiency M18x1 2

Muzzle brake and compensator

Muzzle brake SAR2 (CERAKOTE)

The muzzle brake is a device that eliminates the negative effects of forces acting on the shooter and the weapon after the shot. It changes the direction of the flow of gases escaping during the shot from the barrel and thus compensates for the recoil and dampens the impact of the shot. Our SAR2 muzzle brake not only compensates for recoil and shot, but...

View

Trigger guard CZ 457 (tactical)

Trigger guard CZ 457 (tactical) 2

Tuning

Trigger guard CZ 457 (tactical)

The new tactical trigger guard for small-bore rifle CZ 457 can be now purchased as a supplement to your small-bore rifle. Trigger guard is made of quality duralumin and it is possible to order it in five colour design (black, blue, red, khaki and gold). Colour design is solved by Cerakote spraying and the trigger guard itself is designed to best suit new...

View

Riflescope AR 2,5-15x32 SFIR HFT

Riflescope AR 2,5-15x32 SFIR HFT 2

Optics

Riflescope AR 2,5-15x32 SFIR HFT

The high-quality and very durable 30 mm tube is made from a single piece of aviation duralumin and is filled with nitrogen. Thanks to this, it has high mechanical resistance and does not fog. The lenses are coated with multi-layer anti-reflective protection, which guarantees a clean and clear image even in low light conditions.This is a high-quality...

View

Bipod F-Class F1 3,5-8" (ARCA SWISS)

Bipod F-Class F1 3,5-8" (ARCA SWISS) 2

Bipods

Bipod F-Class F1 3,5-8" (ARCA SWISS)

The high-quality and extremely accurate workshop-processed bipod F-Class F1 (ARCA SWISS) is the best choice for every long range shooter. Bipod F-Class F1 (ARCA SWISS) is made of high-quality air duralumin and the overall product processing is at very high level. Individual parts are milled on modern CNC machines, ensuring maximum accuracy and production...

View

Muzzle brake 5/8x24UNF

Muzzle brake 5/8x24UNF 2

Muzzle brake and compensator

Muzzle brake SAR2 (blackening)

The muzzle brake is a device that eliminates the negative effects of forces acting on the shooter and the weapon after the shot. It changes the direction of the flow of gases escaping during the shot from the barrel and thus compensates for the recoil and dampens the impact of the shot. Our SAR2 muzzle brake not only compensates for recoil and shot, but...

View

Riflescope MR PRO 4-16X44 FFP

Riflescope MR PRO 4-16X44 FFP 2

Optics

Riflescope MR PRO 4-16X44 FFP

The first thing that stands out about this riflescope is the excellent brightness, faithful image and high-quality workmanship. This is due, among other things, to a patented lens system that ensures 92% light transmission and an incredibly bright and clear image even in the dark. The scopes have been subjected to rigorous tests to withstand the harshest...

View

Bipod F-Class F1 3,5-8" (UIT)

Bipod F-Class F1 3,5-8" (UIT) 2

Bipods

Bipod F-Class F1 3,5-8" (UIT)

The high-quality and extremely accurate workshop-processed bipod F-Class F1 (UIT) is the best choice for every long range shooter.Bipod F-Class F1 is made of high-quality air duralumin and the overall product processing is at very high level. Individual parts are milled on modern CNC machines, ensuring maximum accuracy and production quality. The...

View

Bipod TACTICAL TK4 6,5-9" CZ 600 MDT LIMITED EDITION

Bipod TACTICAL TK4 6,5-9" CZ 600 MDT LIMITED EDITION 2

Bipods

Bipod TACTICAL TK4 6,5-9" CZ 600 MDT LIMITED EDITION

Bipod Tactical TK4 CZ 600 MDT (limited edition). This is a bipod that was specially designed for the CZ 600 MDT rifle in the Burnt Bronze color. All parts are very precisely and manually matched to be simply 100% perfect. The entire series consists of only 100 units, and each piece is individually numbered. The bipod with production number 001/100 is...

View

Puškohled 7

Puškohled 7 2

Optics

Puškohled 7

View

Muzzle brake F1 PRO (color CERAKOTE)

Muzzle brake F1 PRO (color CERAKOTE) 2

Muzzle brake and compensator

Muzzle brake F1 PRO (color CERAKOTE)

The F1 PRO muzzle brake is a highly effective five-chamber brake with an exhaust channel that prevents the weapon from bouncing sideways. Its chambers are designed to not only extremely dampen the recoil and lateral rebound of the weapon, but also prevent its vertical rebound.Test shooters described its effect: "It's like pulling a shotgun to the ground...

View

Bipod TACTICAL TK4 6,5-9" COMBAT

Bipod TACTICAL TK4 6,5-9" COMBAT 2

Bipods

Bipod TACTICAL TK4 6,5-9" COMBAT

Tactical TK4 COMBAT Bipod (Special Edition) This is a bipod specifically designed for tactical use, featuring elements that the standard TK4 bipods do not have. All parts of the bipod are meticulously and manually aligned to ensure 100% perfection. It is a modern tactical bipod that evolved from the extremely popular and reliable TK3 version. Key features...

View

Muzzle brake F1 PRO (blackening)

Muzzle brake F1 PRO (blackening) 2

Muzzle brake and compensator

Muzzle brake F1 PRO (blackening)

The F1 PRO muzzle brake is a highly effective five-chamber brake with an exhaust channel that prevents the weapon from bouncing sideways. Its chambers are designed to not only extremely dampen the recoil and lateral rebound of the weapon, but also prevent its vertical rebound.Test shooters described its effect: "It's like pulling a shotgun to the ground...

View

Bipod TACTICAL PRS 6,5-8" (WEAVER)

Bipod TACTICAL PRS 6,5-8" (WEAVER) 2

SPECIAL OFFERS

Bipod TACTICAL PRS 6,5-8" (WEAVER)

ACTION !!! DISCOUNT !!! ONLY 1 PIECE - VALID UNTIL SOLD OUT Used but 100% functional goods with a FULL WARRANTY. This is a new product (demonstration piece), which shows signs of slight wear. Bipod Tactical Evo PRS is made of high quality duralumin AW 7075 and extremely precisely machined. Bipod Tactical Evo PRS (WEAVER) is a great choice for every...

View

Bipod TACTICAL TK4 6,5-9" (WEAVER)

Bipod TACTICAL TK4 6,5-9" (WEAVER) 2

Bipods

Bipod TACTICAL TK4 6,5-9" (WEAVER)

The Tactical TK4 Bipod is a modern tactical bipod that evolved from the extremely popular and reliable TK3 model. It retains key features such as top-quality materials, perfect craftsmanship, and 100% functionality under all conditions, with several enhancements that elevate the Tactical TK4 to the top of its class. The main upgrade is a modernized system...

View

Riflescope AR 2-12x40 SFIR

Riflescope AR 2-12x40 SFIR 2

Optics

Riflescope AR 2-12x40 SFIR

This model uses a reticle, which is suitable for shooting even at long distances and allows estimation of the size of the target. The cross is located in the second focal plane, so when magnified, its size remains the same. It is possible to illuminate it red in 11 levels of intensity. Thanks to the large range of backlight intensity settings, unpleasant...

View

Bipod TACTICAL TK4 LOCK system (LOCK-WEAVER)

Bipod TACTICAL TK4 LOCK system (LOCK-WEAVER) 2

Bipods

Bipod TACTICAL TK4 LOCK system (LOCK-WEAVER)

The Tactical TK4 Bipod is a modern tactical bipod that evolved from the extremely popular and reliable TK3 model. It retains key features such as top-quality materials, perfect craftsmanship, and 100% functionality under all conditions, with several enhancements that elevate the Tactical TK4 to the top of its class. The main upgrade is a modernized system...

View

Riflescope IMAX ED 1-8x24 SFIR

Riflescope IMAX ED 1-8x24 SFIR 2

Optics

Riflescope IMAX ED 1-8x24 SFIR

The high-quality and very durable 30 mm tube is made from a single piece of aviation duralumin and is filled with nitrogen. Thanks to this, it has high mechanical resistance and does not fog. The lenses are coated with multi-layer anti-reflective protection, which guarantees a clean and clear image even in low light conditions.The etched glass cross is...

View

Bipod TACTICAL TK4 6,5-9" (M-LOK)

Bipod TACTICAL TK4 6,5-9" (M-LOK) 2

Bipods

Bipod TACTICAL TK4 6,5-9" (M-LOK)

The Tactical TK4 Bipod is a modern tactical bipod that evolved from the extremely popular and reliable TK3 model. It retains key features such as top-quality materials, perfect craftsmanship, and 100% functionality under all conditions, with several enhancements that elevate the Tactical TK4 to the top of its class. The main upgrade is a modernized...

View

Riflescope IMAX ED 2-16x44 SFIR

Riflescope IMAX ED 2-16x44 SFIR 2

Optics

Riflescope IMAX ED 2-16x44 SFIR

This model uses a reticle, which is suitable for shooting at long distances and allows estimation of the size of the target. The cross is located in the second focal plane, so when magnified, its size remains the same. It is possible to illuminate it red in 11 levels of intensity. Thanks to the large range of backlight intensity settings, unpleasant glare...

View

Muzzle brake CZ SCORPION EVO 3 (M18x1)

Muzzle brake CZ SCORPION EVO 3 (M18x1) 2

Muzzle brake and compensator

Muzzle brake CZ SCORPION EVO 3 (M18x1)

Muzzle brake SAR2 for CZ SCORPION EVO 3 is a highly effective three-chamber brake with an exhaust channel preventing the side bounce of the weapon. Its chambers are designed so that there is no negative exhaust of post-firing gases towards the shooter. Of the technical parameters, it is definitely worth mentioning the easy installation, locking the brake...

View

T-shirt Tactical EVO (black and sand)

T-shirt Tactical EVO (black and sand) 2

Tactical clothing and equipment

T-shirt Tactical EVO (black and sand)

Tactical EVO T-shirt in sizes S, M, L, XL and two possible colors (black, sand). The T-shirt is made of quality materials that do not irritate the skin and is very pleasant to the touch and wear.The T-shirt is universal for both women and men and will also serve as a gift 100%.

View

Bipod TACTICAL TK4 6,5-9" (ARCA SWISS)

Bipod TACTICAL TK4 6,5-9" (ARCA SWISS) 2

Bipods

Bipod TACTICAL TK4 6,5-9" (ARCA SWISS)

The Tactical TK4 Bipod is a modern tactical bipod that evolved from the extremely popular and reliable TK3 model. Key features such as top-quality materials, perfect craftsmanship, and 100% functionality under all conditions have been preserved, with several upgrades that elevate the Tactical TK4 to the absolute top. The main change is a modernized...

View

Riflescope OPTICS AR 1.5-15X32 SFIR

Riflescope OPTICS AR 1.5-15X32 SFIR 2

Optics

Riflescope OPTICS AR 1.5-15X32 SFIR

The high-quality and very durable 30 mm tube is made from a single piece of aviation duralumin and is filled with nitrogen. Thanks to this, it has high mechanical resistance and does not fog. The lenses are coated with multi-layer anti-reflective protection, which guarantees a clean and clear image even in low light conditions.The etched glass cross is...

View

Muzzle brake CZ SCORPION EVO3 (CERAKOTE, M18x1)

Muzzle brake CZ SCORPION EVO3 (CERAKOTE, M18x1) 2

Muzzle brake and compensator

Muzzle brake CZ SCORPION EVO3 (CERAKOTE, M18x1)

The SAR2 muzzle brake for the CZ SCORPION EVO 3 is a highly effective three-chamber brake with an exhaust channel preventing the weapon from bouncing sideways. Its chambers are designed so that there is no negative exhaust of post-firing gases towards the shooter. Of the technical parameters, it is definitely worth mentioning the easy installation,...

View

Buttstock cover (genuine leather)

Buttstock cover (genuine leather) 2

Weapon accessories

Buttstock cover (genuine leather)

Additional cheekpiece for the stock. The cheekpiece is very well made, it is sewn from genuine leather and it can be easily and quickly attached to any classic stock. Attachment to the stock is done with Velcro. Variability is ensured by several foam pads, thanks to which you can easily achieve an additional increase of the cheek by approximately 20 mm...

View

Bipod TACTICAL TK4 6,5-9" (UIT)

Bipod TACTICAL TK4 6,5-9" (UIT) 2

Bipods

Bipod TACTICAL TK4 6,5-9" (UIT)

The Tactical TK4 Bipod is a modern tactical bipod that evolved from the extremely popular and reliable TK3 model. Key features such as top-quality materials, perfect craftsmanship, and 100% functionality under all conditions have been preserved, with several upgrades that elevate the Tactical TK4 to the absolute top. The main change is a modernized...

View

Riflescope HR 1.25-6x20 IR

Riflescope HR 1.25-6x20 IR 2

Optics

Riflescope HR 1.25-6x20 IR

The high-quality and very durable 30 mm tube is made from a single piece of aviation duralumin and is filled with nitrogen. Thanks to this, it has high mechanical resistance and does not fog. The lenses are coated with multi-layer anti-reflective protection, which guarantees a clean and clear image even in low light conditions.The eyepiece of the rifle...

View

Muzzle brake F1 PRO for CZ SCORPION (M18x1)

Muzzle brake F1 PRO for CZ SCORPION (M18x1) 2

Muzzle brake and compensator

Muzzle brake F1 PRO for CZ SCORPION (M18x1)

The F1 PRO muzzle brake for CZ SCORPION EVO 3 is a highly effective five-chamber brake with an exhaust channel that prevents the weapon from bouncing sideways. Its chambers are designed to not only extremely dampen the recoil and lateral rebound of the weapon, but also prevent its vertical rebound.Of the technical parameters, it is definitely worth...

View

Adjustable RECOIL PAD (universal)

Adjustable RECOIL PAD (universal) 2

Weapon accessories

Adjustable RECOIL PAD (universal)

The universal adjustable recoil pad mechanism is designed for all types of stocks. The adjustable mechanism of the recoil pad was developed with regard to the needs of shooters to easily and quickly change its settings.It is possible to use practically any rubber recoil pad that suits you on our height and length adjustable mechanics, or you can buy ATI...

View

Bipod TACTICAL TK4 6,5-9" (SPIGOT)

Bipod TACTICAL TK4 6,5-9" (SPIGOT) 2

Bipods

Bipod TACTICAL TK4 6,5-9" (SPIGOT)

The Tactical TK4 Bipod is a modern tactical bipod that evolved from the extremely popular and reliable TK3 model. It retains key features such as top-quality materials, perfect craftsmanship, and 100% functionality under all conditions, with several enhancements that elevate the Tactical TK4 to the top of its class. The main upgrade is a modernized...

View

Riflescope TF 4-16x44 AOIR

Riflescope TF 4-16x44 AOIR 2

Optics

Riflescope TF 4-16x44 AOIR

The high-quality and very durable 30 mm tube is made from a single piece of aviation duralumin and is filled with nitrogen. Thanks to this, it has high mechanical resistance and does not fog. The lenses are coated with multi-layer anti-reflective protection, which guarantees a clean and clear image even in low light conditions.The eyepiece of the rifle...

View

Muzzle brake F1 PRO for CZ SCORPION (CERAKOTE, M18x1)

Muzzle brake F1 PRO for CZ SCORPION (CERAKOTE, M18x1) 2

Muzzle brake and compensator

Muzzle brake F1 PRO for CZ SCORPION (CERAKOTE, M18x1)

The F1 PRO muzzle brake for CZ SCORPION EVO 3 is a highly effective five-chamber brake with an exhaust channel that prevents the weapon from bouncing sideways. Its chambers are designed to not only extremely dampen the recoil and lateral rebound of the weapon, but also prevent its vertical rebound.Of the technical parameters, it is definitely worth...

View

Fast Ammo 2 pin

Fast Ammo 2 pin 2

Weapon accessories

Fast Ammo 2 pin

Fast Ammo 2 is an easy way to refill your capacity and also to quickly reload your weapon. The tactical accessory is easy to install with a Velcro fastener. Fast Ammo 2 is designed for ammo from .223 through .308 to .338 calibre.

View

Bipod TACTICAL TK4 6,5-9" (KeyMOD)

Bipod TACTICAL TK4 6,5-9" (KeyMOD) 2

Bipods

Bipod TACTICAL TK4 6,5-9" (KeyMOD)

The Tactical TK4 Bipod is a modern tactical bipod that evolved from the extremely popular and reliable TK3 model. It retains key features such as top-quality materials, perfect craftsmanship, and 100% functionality under all conditions, with several enhancements that elevate the Tactical TK4 to the top of its class. The main upgrade is a modernized...

View

Riflescope EO 3-9x40 AOEG KN

Riflescope EO 3-9x40 AOEG KN 2

Optics

Riflescope EO 3-9x40 AOEG KN

The high-quality and very durable 25.4mm (1") tube is made from a single piece of aviation duralumin, which is filled with nitrogen. Thanks to this, it has high mechanical resistance and does not fog. The lenses are coated with multi-layer anti-reflective protection, which guarantees a clean and clear image even behind poor lighting conditions.The...

View

Muzzle brake PCC (1/2x28 UNF)

Muzzle brake PCC (1/2x28 UNF) 2

Muzzle brake and compensator

Muzzle brake PCC (1/2x28 UNF)

The muzzle brake is a device that eliminates the negative effects of forces acting on the shooter and the weapon after the shot. It changes the flow direction of the gases escaping from the barrel, thus compensating for the recoil and dampening the impact of the shot. Our PCC muzzle brake not only compensates for recoil and shot, but also prevents the...

View

Fast Ammo 3 pin

Fast Ammo 3 pin 2

Weapon accessories

Fast Ammo 3 pin

Fast Ammo 3 is your easy way to refill capacity and also to quickly reload your weapon. The tactical accessory is easy to install via the Velcro fastener, which is included in the delivery and can also be ordered separately. The Fast Ammo 3 is designed for 3 extra ammo (from .223 through .308 to .338 calibre)

View

Riflescope SR 3-9x40 HK

Riflescope SR 3-9x40 HK 2

Optics

Riflescope SR 3-9x40 HK

The high-quality and very durable tube with a diameter of 25,4 (1") is made from a single piece of aviation duralumin and, thanks to this, has high mechanical resistance. The lenses are coated with green anti-reflective protection, which guarantees a clear image even in poor lighting conditions.The eyepiece of the rifle scope has an optical correction of...

View

Tuning trigger CZ SCORPION EVO 3

Tuning trigger CZ SCORPION EVO 3 2

Tuning

Tuning trigger CZ SCORPION EVO 3

The trigger is designed for all those who want to fit their weapon with something unconventional and exceptional. Installing the trigger is very easy, so you're done in minutes.The trigger is made of high quality material AW 7075 and the surface treatment is solved with black or red anodized.We recommend using it in combination with a tension lever of a...

View

Muzzle brake PCC for CZ SCORPION EVO CARABINE (1/2x28UNF))

Muzzle brake PCC for CZ SCORPION EVO CARABINE (1/2x28UNF)) 2

Muzzle brake and compensator

Muzzle brake PCC for CZ SCORPION EVO CARABINE (1/2x28UNF))

The PCC muzzle brake is designed for the CZ SCORPION EVO CARABINE and not only compensates for recoil and shot, but also prevents the weapon from bouncing after the shot.The muzzle brake is a device that eliminates the negative effects of forces acting on the shooter and the weapon after the shot. It changes the flow direction of the gases escaping from...

View

Riflescope EO 4-16x44 AOEG

Riflescope EO 4-16x44 AOEG 2

Optics

Riflescope EO 4-16x44 AOEG

The high-quality and very durable 25.4mm (1") tube is made from a single piece of aviation duralumin, which is filled with nitrogen. Thanks to this, it has high mechanical resistance and does not fog. The lenses are coated with multi-layer anti-reflective protection, which guarantees a clean and clear image even behind poor lighting conditions.The...

View

Fuse cover for CZ SCORPION EVO 3

Fuse cover for CZ SCORPION EVO 3 2

Tuning

Safety cover for CZ SCORPION EVO 3

Safety cover for CZ SCORPION EVO 3.Are you not using the safety on the right or left side of the weapon? You can easily blind the unused side. Blinding an unused safety is very easy and you can handle it in a few seconds.

View

External WEAVER for mirage band

External WEAVER for mirage band 2

Weapon accessories

External WEAVER for mirage band

External WEAVER handle of lenta (mirage band - heat screen) for situations, when a rifle isn´t equipped with the handle in standard. Our handle is ready for installation on the weaver rail and it is suitable for any regular lenta (mirage band). Handle of lenta is easilly installed on weaver rail (approx. 10 sec.), light and made of quality aerial...

View

Riflescope CM 4-16x44 AOE

Riflescope CM 4-16x44 AOE 2

Optics

Riflescope CM 4-16x44 AOE

The high-quality and very durable 25.4mm (1") tube is made from a single piece of aviation duralumin, which is filled with nitrogen. Thanks to this, it has high mechanical resistance and does not fog. The lenses are coated with multi-layer anti-reflective protection, which guarantees a clean and clear image even behind The entire scope is made in a...

View

Insulation ring for CZ SCORPION EVO 3

Insulation ring for CZ SCORPION EVO 3 2

Tuning

Insulation ring for CZ SCORPION EVO 3

Insulation ring for CZ SCORPION EVO 3. The ring is made on CNC from a very high quality material AW 7075. The surface treatment is solved with black or red anodized.In the production documentation of CZ SCORPION EVO it is part no.5. The original part is made of plastic and after about 10,000 shots it breaks, thanks to which the forearm begins to move...

View

Mirage band elastic (thermal shield)

Mirage band elastic (thermal shield) 2

Weapon accessories

Mirage band elastic (thermal shield)

The (Lenta) mirage band is designed for all types of rifles and is made from a highly durable and elastic material designed to divert heat from the barrel to prevent negative thermal effects from the mirage. The mirage is a thermal phenomenon that causes optical illusion. The Lenta (mirage band - thermal shield) helps to eliminate this.

View

Tuning tension lever CZ SCORPION EVO 3

Tuning tension lever CZ SCORPION EVO 3 2

Tuning

Tuning charging handle CZ SCORPION EVO 3

Tuning charging handle for CZ SCORPION EVO 3. The charging handle is extended compared to the plastic original and its design corresponds to other tuning accessories for CZ SCORPION EVO 3, which we sell. Installing the charging handle is very easy, so you're done in minutes.The handle is made of high quality material AW 7075 and the surface treatment is...

View

Bipod TACTICAL PRS 6,5-8" (WEAVER)

Bipod TACTICAL PRS 6,5-8" (WEAVER) 2

Bipods

Bipod TACTICAL PRS 6,5-8" (WEAVER)

Bipod Tactical Evo PRS is made of high quality duralumin AW 7075 and extremely precisely machined. Bipod Tactical Evo PRS (WEAVER) is a great choice for every police, army or sports shooter of tactical disciplines PRS. Of course, the bipods will also serve other shooters who prefer 100% quality. Made in Czech Republic.The Bipod has been tested in the most...

View

Mirage band elastic (thermal shield)

Mirage band elastic (thermal shield) 2

Weapon accessories

Mirage band elastic (thermal shield)

The (Lenta) mirage band is designed for all types of rifles and is made from a highly durable and elastic material designed to divert heat from the barrel to prevent negative thermal effects from the mirage. The mirage is a thermal phenomenon that causes optical illusion. The Lenta (mirage band - thermal shield) helps to eliminate this.

View

Tunning trigger for CZ P-10 (red)

Tunning trigger for CZ P-10 (red) 2

Tuning

Tunning trigger for CZ P-10 (red)

Tuning trigger for CZ P-10 pistol. The trigger is made of high quality AW 7075 material and the surface treatment is solved with black or red anodized. Installation is easy, so you're done in minutes and your pistol gets an interesting design element.We recommend using it in combination with an extended magazine capture of a similar design.

View

Bipod TACTICAL PRS LOCK 6,5-8" (WEAVER)

Bipod TACTICAL PRS LOCK 6,5-8" (WEAVER) 2

Bipods

Bipod TACTICAL PRS LOCK 6,5-8" (WEAVER)

The Tactical Evo PRS LOCK bipod is made of high-quality AW 7075 duralumin and is processed extremely precisely. Bipod Tactical Evo PRS(WEAVER) is a great choice for every police, army or sports shooter of tactical disciplines PRS. Of course, the bipods will also serve other shooters who prefer 100% quality. Made in Czech Republic. The Tactical PRS LOCK...

View

Mirage band carrier (front and back part)

Mirage band carrier (front and back part) 2

Weapon accessories

Mirage band carrier (front and back part)

The set of lenta (mirage band) carriers. The set contains two parts of the carrier. The first one attaches to the front of the barrel and the second one attaches to the receiver. This is a spare part for lenta (mirage band), which we sell as a separate product on this website, but it can also be used as a proper base if you want to make a heat screen...

View

Bipod TACTICAL PRS 6,5-8" (ARCA Swiss)

Bipod TACTICAL PRS 6,5-8" (ARCA Swiss) 2

Bipods

Bipod TACTICAL PRS 6,5-8" (ARCA Swiss)

Bipod Tactical Evo PRS is made of high quality duralumin AW 7075 and extremely precisely machined. Bipod Tactical Evo PRS (ARCA Swiss) is a great choice for every police, army or sports shooter of tactical disciplines PRS. Of course, the bipods will also serve other shooters who prefer 100% quality. Made in Czech Republic.The Bipod has been tested in the...

View

Tunning trigger for CZ P-10 (black)

Tunning trigger for CZ P-10 (black) 2

Tuning

Tunning trigger for CZ P-10 (black)

Tuning trigger for CZ P-10 pistol. The trigger is made of high quality AW 7075 material and the surface treatment is solved with black or red anodized. Installation is easy, so you're done in minutes and your pistol gets an interesting design element.We recommend using it in combination with an extended magazine capture of a similar design.

View

Bipod Tactical PRS UIT version

Bipod Tactical PRS UIT version 2

Bipods

Bipod TACTICAL PRS 6,5-8" (UIT)

Bipod Tactical Evo PRS is made of high quality duralumin AW 7075 and extremely precisely machined. Bipod Tactical Evo PRS (UIT) is a great choice for every police, army or sports shooter of tactical disciplines PRS. Of course, the bipods will also serve other shooters who prefer 100% quality. Made in Czech Republic.The Bipod has been tested in the most...

View

Extended magazine catch CZ P-10

Extended magazine catch CZ P-10 2

Tuning

Extended magazine catch CZ P-10

Extended magazine catch CZ P-10. The catch is made of high quality AW 7075 material and the surface treatment is solved with black or red anodized. Installation is easy, so you are done in a few minutes and your pistol will get an interesting and above all functional design element.Designed for the version with a rotating catch. It doesn't work on the...

View

Bipod PRS KeyMOD

Bipod PRS KeyMOD 2

Bipods

Bipod TACTICAL PRS 6,5-8" (KeyMOD)

Bipod Tactical Evo PRS is made of high quality duralumin AW 7075 and extremely precisely machined. Bipod Tactical Evo PRS (KeyMOD) is a great choice for every police, army or sports shooter of tactical disciplines PRS. Of course, the bipods will also serve other shooters who prefer 100% quality. Made in Czech Republic.The Bipod has been tested in the most...

View

Stock screw SA 58 (vz 58, 585 and clones)

Stock screw SA 58 (vz 58, 585 and clones) 2

Tuning

Stock screw SA 58 (vz 58, 585 and clones)

Modernized version of the stock screw for SA 58 submachine gun (vz 58 and clones) on an Allen key. A big problem with the original screw, which has a classic "screw groove", is very complicated tightening or loosening of this screw. Either the screw cannot be tightened properly or, conversely, cannot be loosened. The stock screw we sell solves this...

View

Tactical bipod PRS mlok.

Tactical bipod PRS mlok. 2

Bipods

Bipod TACTICAL PRS 6,5-8" (M-LOK)

Bipod Tactical Evo PRS is made of high quality duralumin AW 7075 and extremely precisely machined. Bipod Tactical Evo PRS (M-LOK) is a great choice for every police, army or sports shooter of tactical disciplines PRS. Of course, the bipods will also serve other shooters who prefer 100% quality. Made in Czech Republic.The Bipod has been tested in the most...

View

Forehead breech for CZ P-10

Forehead breech for CZ P-10 2

Tuning

Forehead breech for CZ P-10

Dural breech for CZ P-10 pistol. Breech is made of high quality material AW 7075 and the surface treatment is solved with black or red anodized. Installation is easy, so you're done in minutes and your pistol gets a new and extraordinary dimension.It also works with the first generation pistol.

View

ARCA Swiss rail for M-LOK

ARCA Swiss rail for M-LOK 2

Weapon accessories

ARCA Swiss rail for M-LOK

The ARCA Swiss rail is a great addition to any rifle that has a chassis with an M-LOK clamping system. It can be used wherever the weapon uses a forend (chassis) with an M-LOK clamping system. A typical example is the weapons used for PRS shooting disciplines.This will give you a big advantage! You can easily move bipods or other accessories efficiently...

View

Trigger resistance spring CZ 557, 550 and 527

Tuning

Trigger resistance spring CZ 557, 550 and 527

Spring used to reduce the resistance of the trigger CZ 557, CZ 550, CZ 527 and increase its accuracy.Using the trigger spring, you can reduce the resistance of the trigger up to 0.5 kg.When the lowest trigger resistance is set, firing may occur when the weapon is unlocked! This fact must be taken into account! For the above reasons, we do not recommend...

View

CZ 457 trigger resistance springs

Tuning

CZ 457 trigger resistance springs

A set of springs used to reduce the resistance of the CZ 457 trigger and increase its accuracy.The set includes two springs, with the trigger spring reducing the factory resistance of the trigger by -50% and the impact spring, which has a 10% higher resistance. Using the trigger spring, you can reduce the trigger resistance to 0.5 kg.A stronger impact...

View

Trigger resistance spring TIKKA T3, T3x and T1x

Tuning

Trigger resistance spring TIKKA T3, T3x and T1x

Spring used to reduce the resistance of the trigger for TIKKA T3, T3x, T1x and increase its accuracy.Using the trigger spring, you can reduce the resistance of the trigger up to 0.5 kg. When the lowest trigger resistance is set, firing may occur when the weapon is unlocked! This fact must be taken into account! For the above reasons, we do not recommend...

View

Trigger resistance springs for CZ 455 / ZKM 452

Tuning

Trigger resistance springs for CZ 455 / ZKM 452

A set of springs used to reduce the resistance of the CZ 455 trigger from the factory 1.3 kg to 0.3 kg, according to your preferences. The strength of the trigger resistance is affected by more factors than just the force of the springs. Therefore, take the achievable resistance as a guide, it can vary by a few percent. The adjusting nuts on the spring...

View

Puškohled 8

Puškohled 8 2

Optics

Puškohled 8

View

Trigger resistance springs CZ P-10

Tuning

Trigger resistance springs CZ P-10

The set of springs is used to reduce the resistance of the trigger of the CZ P-10 pistol. Our set of springs is fully compatible with variants of pistols S, C, SC, F and contains two versions of the impact spring.One reduces the resistance of the trigger by 0.25 kg, the other by 0.5 kg, so it only depends on you which variant you choose.The springs are...

View

Bubble level 25,4mm (1") LIBELA

Bubble level 25,4mm (1") LIBELA 2

Weapon accessories

Bubble level 25,4mm (1")

The quality 25.4mm (1") spirit level has been tested by our competitive shooters. Its construction is designed to withstand the high-powered weapons you may encounter in hunting and sniper rifles. The mounting system is made of anodized aircraft grade aluminum 6065T.It is a quality spirit level for reasonable money!

View

SAKO 75, 85, 595 and 695 trigger resistance spring

Tuning

SAKO 75, 85, 595 and 695 trigger resistance spring

Spring used to reduce the resistance of the trigger SAKO 75, 85 595, 695 and increase its accuracy.Using the trigger spring, you can reduce the resistance of the trigger up to 0.5 kg.When the lowest trigger resistance is set, firing may occur when the weapon is unlocked! This fact must be taken into account! For the above reasons, we do not recommend...

View

Bubble level 30mm LIBELA

Bubble level 30mm LIBELA 2

Weapon accessories

Bubble level 30mm

The quality 30mm spirit level has been tested by our competitive shooters. Its construction is designed to withstand the high-powered weapons you may encounter in hunting and sniper rifles. The mounting system is made of anodized aircraft grade aluminum 6065T.It is a quality spirit level for reasonable money!

View

Trigger resistance springs for CZ SCORPION EVO

Tuning

Trigger resistance springs for CZ SCORPION EVO

A set of springs used to reduce the resistance of the trigger from the factory 5kg to 2.5kg. The CZ SCORPION EVO 3 weapon is designed from the ground up as a service weapon, and for this reason the resistance of the trigger and its characteristics are designed to maintain shooting safety even in crisis situations and shooting in gloves. During the...

View

Browning X-BOLT trigger resistance spring

Tuning

Browning X-BOLT trigger resistance spring

Spring used to reduce the resistance of the trigger Browning X-BOLT and increase its accuracy.Using the trigger spring, you can reduce the resistance of the trigger up to 0.5 kg.When the lowest trigger resistance is set, firing may occur when the weapon is unlocked! This fact must be taken into account! For the above reasons, we do not recommend setting...

View

Anti-slip rubbers for bipod

Spare parts and accessories

Anti-slip rubbers for bipod Tactical Evo TK3 and TK4

Anti-slip rubbers are designed for bipod Tactical Evo TK3 (TK4) and are very easy and fast to stick. The rubber is made of 2mm thick self-adhesive rubber in the form of a bipod Tactical Evo TK3 (TK4) support rail and is not compatible with other rails.

View

HARD support rail for TK3 and TK4 bipod

HARD support rail for TK3 and TK4 bipod 2

Spare parts and accessories

HARD support rail for TK3 and TK4 bipod

The HARD support rail (designed for hard surfaces such as concrete and ice) is primarily intended for hard surfaces, but it also performs very well on other surfaces (mud, soil, etc.). The rail is easily replaceable and allows for quick modification of the support system.

View

Mounting two-piece 25.4mm (1 ") on 11mm rail - LOW

Mounting two-piece 25.4mm (1 ") on 11mm rail - LOW 2

Weapon accessories

Mounting two-piece 25.4mm (1 ") on 11mm rail - LOW

Two-piece LOW duralumin mounting is designed for riflescopes with a smaller objective, usually up to 40 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 25.4 mm (1 ") tube. The mounting is designed for an 11 mm rail.

View

Walther LG 300 / LG 400

Walther LG 300 / LG 400 2

Tuning

Walther steel cartridge plug

Spare part for WALTHER steel cartridges.Long-term use of some Walther steel cartridges wears out the thread on the cartridge. This is manifested mainly by the fact that there is a layer of small brass sawdust in the area of the pressure regulator.Over time, the thread on the cartridge becomes so worn that the thread does not withstand the air pressure...

View

Joint with bearing for bipod TK3 and TK4

Joint with bearing for bipod TK3 and TK4 2

Spare parts and accessories

Joint with bearing for bipod TK3 and TK4

Replacement Part for Tactical EVO Bipod Models TK3 and TK4 - Joint with Bearing and Weaver Rail. The joint with a bearing allows for perfect locking of the bipod, while also offering the ability to adjust the lever so that the lock can be smoothly overridden. The pressure required for tilting can be easily adjusted using the locking lever. Additionally,...

View

Two-piece mounting 30mm on 11mm rail - LOW

Two-piece mounting 30mm on 11mm rail - LOW 2

Weapon accessories

Two-piece mounting 30mm on 11mm rail - LOW

Two-piece LOW duralumin mounting is designed for riflescopes with a smaller objective, usually up to 40 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 30mm tube. The mounting is designed for 11mm rail.

View

Filling PIN for WALTHER air rifles (universal)

Filling PIN for WALTHER air rifles (universal) 2

Tuning

Filling PIN for WALTHER air rifles (universal)

Universal filling PIN (valve) for WALTHER air rifles and pistols. The filling pin is designed for both types of cylinders, so it can be mounted on both 200 and 300 bar pressure bottles (bombs).

View

Joint with bearing for bipod TK3 and PRS

Joint with bearing for bipod TK3 and PRS 2

Spare parts and accessories

Joint with bearing for bipod TK3, TK4 and PRS

Spare part for bipod Tactical EVO model TK3, TK4 and PRS - joint with bearing. This spare part allows you to retrofit your Tactical Evo TK3 or PRS bipod with new functionality.This consists in the fact that you can tilt the bipod to the side just by pressing on the bipod. You can easily adjust the pressure required for tilting with the locking handle. In...

View

Enlargement of the Walther LG 300 pressure regulator chamber

Enlargement of the Walther LG 300 pressure regulator chamber 2

Tuning

Enlargement of the Walther LG 300 pressure regulator chamber

Ring for enlarging the chamber of the pressure regulator for the Walther LG 300 air rifle.The chamber of the standard pressure regulator of the PCP air rifle Walther LG 300 is designed for shooting with a power of 7.5J. With our rings, you can easily achieve an enlargement of the chamber and thus the possibility to set the power of the Walther LG 300 air...

View

Spare bearing for bipod TK3, TK4 and PRS

Spare bearing for bipod TK3, TK4 and PRS 2

Spare parts and accessories

Spare bearing for bipod TK3, TK4 and PRS

Replacement joint bearing of the Tactical EVO bipod model TK3, TK4 and PRS.

View

Reduction for Walther LG 400

Reduction for Walther LG 400 2

Tuning

Reduction for Walther LG 400

By replacing the pressure regulator from the LG 400 with a pressure regulator from the LG 300, you will get much greater setting options and the excellent Walther LG 400 air rifle will thus enter a whole new dimension.In the Czech Republic, the limit for an air rifle is in category D (over-the-counter from the age of 18) to 16J. So why not make the most...

View

Silencer for Walther LG 300/400

Silencer for Walther LG 300/400 2

Tuning

Silencer for Walther LG 300/400

You have a Walther LG 300 or Walther LG 400 air rifle and you don't want to disturb your neighbors with training noise. Then fit a standard front sight that you have on your air rifle with our reduction set. You will get an almost inaudible shot and you can improve your shooting skills at home.The set contains all the necessary components and its assembly...

View

Rubber feet for bipod / tripod

Rubber feet for bipod / tripod 2

Weapon accessories

Rubber feet for bipod / tripod

The rubber feet are very precisely made and their construction is especially suitable for use on bipods or tripods. The body of the foot is made of a special polymer and is resistant to water, high temperatures, chemicals and normal mechanical damage. The M5 size screw is stainless steel made of high-quality A4/70 steel, which has increased resistance to...

View

Walther regulator pressure transducer

Walther regulator pressure transducer 2

Tuning

Walther regulator pressure transducer

Do you have a Walther LG 300 or Walther LG 400 air rifle and need to set the correct pressure on the regulator or check if your regulator is working properly?The device we manufacture for precise adjustment and pressure measurement will allow you to do so comfortably and quickly.The pressure transducer is universal for Walther LG 300 and Walther LG 400...

View

KeyMOD Modul for Tactical EVO TK3 bipod

KeyMOD Modul for Tactical EVO TK3 bipod 2

Spare parts and accessories

KeyMOD Modul for Tactical EVO TK3 and TK4 bipod

Spare Fastening Key MOD Modul for Bipod Tactical EVO TK3 and TK4. Modul is easily exchangeable and it allows quick „adjustment“ of Bipod on other fastening systems. Perfect workmanship.

View

M LOK Modul for Tactical EVO TK3 bipod

M LOK Modul for Tactical EVO TK3 bipod 2

Spare parts and accessories

M-LOK Modul for Tactical EVO TK3 and TK4 bipod

Spare Fastening M LOK Modul for Bipod Tactical EVO TK3 and TK4. Modul is easily exchangeable and it allows quick „adjustment“ of Bipod on other fastening systems. Perfect workmanship.

View

UIT Modul for Tactical EVO TK3 and TK4 bipod

UIT Modul for Tactical EVO TK3 and TK4 bipod 2

Spare parts and accessories

UIT Modul for Tactical EVO TK3 and TK4 bipod

Spare Fastening UIT Modul for Bipod Tactical EVO TK3 and TK4. Modul is easily exchangeable and it allows quick „adjustment“ of Bipod on other fastening systems. Perfect workmanship.

View

SPIGOT Modul for Tactical EVO TK3 bipod

SPIGOT Modul for Tactical EVO TK3 bipod 2

Spare parts and accessories

SPIGOT Modul for Tactical EVO TK3 and TK4 bipod

Spare Fastening SPIGOT Modul for Bipod Tactical EVO TK3 and TK4. Modul is easily exchangeable and it allows quick „adjustment“ of Bipod on other fastening systems. Perfect workmanship.

View

Walther LG 300 tension lever pin

Walther LG 300 tension lever pin 2

Tuning

Walther LG 300 tension lever pin

The Walther LG 300 air rifle has a relatively long tension lever, so if you fit it with a riflescope, you will encounter a problem that the original tension lever cannot be pulled. All that remains is to remove and shorten the tension lever. You can then fit it with a duralumin pin made by us. We supply the tensioning pin in silver or black.The set...

View

UIT Modul for Bipod F1

UIT Modul for Bipod F1 2

Spare parts and accessories

UIT Modul for Bipod F1

Spare Fastening UIT Modul for Bipod F-Class F1. Modul is easily exchangeable and it allows quick „adjustment“ of Bipod on other fastening systems.

View

WEAVER Modul for Bipod F1

Spare parts and accessories

WEAVER Modul for Bipod F1

Spare Fastening WEAVER Modul for Bipod F-Class F1. Modul is easily exchangeable and it allows quick „adjustment“ of Bipod on other fastening system.

View

WEAVER Modul for Bipod Tactical TK3

WEAVER Modul for Bipod Tactical TK3 2

Spare parts and accessories

WEAVER Modul for Bipod Tactical TK3, TK4 and PRS

Spare Fastening WEAVER Modul for Bipod Tactical Evo TK3, TK4 and PRS. Modul is easily exchangeable and it allows quick „adjustment“ of Bipod on other fastening systems.

View

ARCA Swiss Modul for Bipod Tactical TK3 and TK4

ARCA Swiss Modul for Bipod Tactical TK3 and TK4 2

Spare parts and accessories

ARCA Swiss Modul for Bipod Tactical TK3 and TK4

Spare Fastening ARCA Swiss Modul for Bipod Tactical Evo TK3 a TK4. Modul is easily exchangeable and it allows quick „adjustment“ of Bipod on other fastening systems.

View

ARCA Swiss Modul for Bipod PRS

ARCA Swiss Modul for Bipod PRS 2

Spare parts and accessories

ARCA Swiss Modul for Bipod PRS

Spare Fastening ARCA Swiss Modul for Bipod Tactical Evo PRS. Modul is easily exchangeable and it allows quick „adjustment“ of Bipod on other fastening systems.

View

ARCA Swiss Modul for Bipod F1

ARCA Swiss Modul for Bipod F1 2

Spare parts and accessories

ARCA Swiss Modul for Bipod F1

Spare Fastening ARCA Swiss Modul for Bipod F-Class F1. Modul is easily exchangeable and it allows quick „adjustment“ of Bipod on other fastening systems.

View

ARCA Swiss Modul for Bipod ATLAS

ARCA Swiss Modul for Bipod ATLAS 2

New

Spare parts and accessories

ARCA Swiss Modul for Bipod ATLAS

Spare Fastening ARCA Swiss Modul for Bipod ATLAS. The module is easily swappable and allows a quick conversion of an ATLAS bipod to a new mounting system. It’s the ideal module for an ATLAS bipod if you want to replace the WEAVER interface with an ARCA-Swiss system.

View

Duralumin grips for CZ 75 and their clones

Duralumin grips for CZ 75 and their clones 2

Tuning

Duralumin grips for CZ 75 and their clones

High-quality and very precisely processed duralumin butts for CZ self-loading pistols. The grips are intended for all those who want to equip their weapon with something unconventional, exceptional and at the same time perfectly functional. Mounting the grips is very easy, so you're done in a few minutes. The screws are included in the package.

View

Return spring guide CZ 75 SP-01, Shadow, Tactical Sport

Tuning

Return spring guide CZ 75 SP-01, Shadow, Tactical Sport

Very high quality, refined and polished return spring guide. By using this guide you will achieve better weapon behavior. Made of high quality steel.

View

WEAVER LOCK Modul for Bipods F1 Class

WEAVER LOCK Modul for Bipods F1 Class 2

Spare parts and accessories

WEAVER LOCK Modul for Bipods F1 Class

Replacement WEAVER LOCK module for Tactical EVO F1 Class bipods. The module is easily replaceable and allows quick "disguise" of the bipod to another clamping system.This module is additionally equipped with a security lock system. The lock system was developed for those users who move when shooting and need to guarantee that their bipod will not come...

View

Mounting of the SHIELD SIGHTS SMS/RMS and RMSc COLLIMATOR...

Tuning

Mounting of the SHIELD SIGHTS SMS/RMS and RMSc COLLIMATOR for CZ 75 SP-01 Shadow, CZ...

The high-quality mount for the SHIELD SIGHTS SMS/RMS/RMSc collimator is very easy to replace with the original standard sights. No modifications to the weapon are required and the original sights can be reinstalled at any time. The mounting of the collimator sight is made of refined steel and will serve you 100% for decades.

View

WEAVER LOCK module for bipods TK3, TK4 and PRS

WEAVER LOCK module for bipods TK3, TK4 and PRS 2

Spare parts and accessories

WEAVER LOCK module for bipods TK3, TK4 and PRS

Replacement WEAVER LOCK module for Tactical EVO TK3, TK4 and PRS bipods. The module is easily replaceable and allows quick "disguise" of the bipod to another clamping system.This module is additionally equipped with a security lock system. The lock system was developed for those users who move when shooting and need to guarantee that their bipod will not...

View

Mounting of SHIELD SIGHTS SMS/RMS and RMSc COLLIMATOR for...

Tuning

Mounting of SHIELD SIGHTS SMS/RMS and RMSc COLLIMATOR for GLOCK

The high-quality mount for the SHIELD SIGHTS SMS/RMS/RMSc collimator is very easy to replace with the original standard sights. No modifications to the weapon are required and the original sights can be reinstalled at any time. The assembly of the collimator sight is made of refined steel and will serve you 100% for decades.

View

Lock system for bipod Tactical EVO F1 Class

Spare parts and accessories

Lock system for bipod Tactical EVO F1 Class

Lock system for bipod Tactical EVO F1 Class. The lock system was developed for those users who move when shooting and need to guarantee that their bipod will not come loose, for example due to accidental catching behind a pontoon belt, clothing, etc.The lock system prevents proper opening, but it can be used to open (release - unlock) with one hand only...

View

Front sight CZ FO 1mm

Tuning

Front sight CZ FO 1mm

The CZ FO front sight with light-conducting fiber 1mm wide 3.3mm with a height of 5.75mm is suitable for a fixed sight for CZ P-07, CZ P-09, CZ P-10 C. It stands out for its highly precise processing and precise geometry. The viewing surface is roughened against unwanted glare.The front sight is suitable for CZ P-07, CZ P-09, CZ P-10 C pistols, where it...

View

Lock system for TK3, TK4 and PRS bipods

Lock system for TK3, TK4 and PRS bipods 2

Spare parts and accessories

Lock system for TK3, TK4 and PRS bipods

Lock system for bipod Tactical EVO TK3, TK4 and PRS. The lock system was developed for those users who move when shooting and need to guarantee that their bipod will not come loose, for example due to accidental catching behind a pontoon belt, clothing, etc.The lock system prevents proper opening, but it can be used to open (release - unlock) with one...

View

UIT Modul for Tactical EVO PRS bipod

Spare parts and accessories

UIT Modul for Tactical EVO PRS bipod

Spare Fastening UIT Modul for Bipod Tactical EVO PRS. Modul is easily exchangeable and it allows quick „adjustment“ of Bipod on other fastening systems. Perfect workmanship.

View

Front sight CZ P-10C FO 1.5mm

Tuning

Front sight CZ P-10C FO 1.5mm

The CZ P-10 C front sight with light guide fiber 1.5 mm wide 3.2 mm and 9 mm high is suitable for the adjustable sight of the CZ P-10 C pistol. It stands out for its highly precise processing and precise geometry. The viewing surface is roughened against unwanted glare.The front sight is suitable for CZ P-10 C pistols, where it is fixed in a longitudinal...

View

M-LOK Modul for Tactical EVO PRS bipod

Spare parts and accessories

M-LOK Modul for Tactical EVO PRS bipod

Spare Fastening M-LOK Modul for Bipod Tactical EVO PRS. Modul is easily exchangeable and it allows quick „adjustment“ of Bipod on other fastening systems. Perfect workmanship.

View

Front sight CZ P-10C FO 1mm

Tuning

Front sight CZ P-10C FO 1mm

Front sight CZ P-10 C with optical fiber 1 mm wide 3.2 mm with a height of 9 mm is suitable for the adjustable sight of the CZ P-10 C pistol. It stands out for its highly precise processing and precise geometry. The viewing surface is roughened against unwanted glare.The front sight is suitable for CZ P-10 C pistols, where it is fixed in a longitudinal...

View

Key MOD Modul for Tactical EVO PRS bipod

Spare parts and accessories

Key MOD Modul for Tactical EVO PRS bipod

Spare Fastening Key MOD Modul for Bipod Tactical EVO PRS. Modul is easily exchangeable and it allows quick „adjustment“ of Bipod on other fastening systems. Perfect workmanship.

View

Fixed GLOCK sights

Tuning

Fixed GLOCK sights

High-quality and very precisely processed sights with precise geometry for GLOCK self-loading pistols. Sights are supplied in a set, i.e. a fixed sight and a light guide front sight. You can choose between 1mm or 1.5mm light-guiding fiber in yellow, orange, red or green.The sight surface of the front sight is roughened against unwanted glare.Made in Czech...

View

Fixed sights GLOCK FO

Tuning

Fixed sights GLOCK FO

High-quality and very precisely processed sights with precise geometry for GLOCK self-loading pistols. The sights are supplied in a set, i.e. a fixed sight with a 1mm light-guiding fiber and a light-guiding front sight. For the fly, you can choose between 1mm or 1.5mm light-guiding fiber in yellow, orange, red or green.The sight surface of the front sight...

View

Rifle tunnel carrier with flap

Rifle tunnel carrier with flap 2

Optics

Rifle tunnel carrier with flap

Rifle tunnel carrier with flap for biathlon shooters. Easily and universally implementable carrier is designed for biathlon rifles with a main diameter of 22 mm. The carrier and the carrier flap are made of solid material (high quality dural AW 6082 T6) on CNC machines and the surface treatment is solved with black anodizing.Perfect workshop processing....

View

Adjustable rear sight CZ 75, CZ 85, CZ 97 (without slide...

Tuning

Adjustable rear sight CZ 75, CZ 85, CZ 97 (without slide adjustment)

High-quality and very precisely processed micrometric adjustable sight with precise geometry for CZ 75 self-loading pistols and their clones. The cutout in the visor slice is 3x2.2mm (width x depth). The micro metrically adjustable front sight is supplied without a front sight, which you can order separately, depending on which weapon it will be mounted...

View

HARD support rail for F-Class F1 bipod

HARD support rail for F-Class F1 bipod 2

Spare parts and accessories

HARD support rail for F-Class F1 bipod

The HARD support rail (for hard surfaces such as concrete) is designed especially for hard surfaces, but also performs very well on other surfaces (mud, soil, etc.). The rail is easily replaceable and allows quick modification of the support system.

View

Adjustable rear sight CZ 75, CZ 85, CZ 97 FO (without...

Tuning

Adjustable rear sight CZ 75, CZ 85, CZ 97 FO (without slide adjustment)

High-quality and very precisely processed micrometric adjustable sight with precise geometry for CZ 75 self-loading pistols and their clones. The cutout in the visor slice is 3x2.2mm (width x depth). The micro metrically adjustable front sight is supplied without a front sight, which you can order separately, depending on which weapon it will be mounted...

View

Support rail SOFT for F-Class F1 bipod

Support rail SOFT for F-Class F1 bipod 2

Spare parts and accessories

Support rail SOFT for F-Class F1 bipod

The SOFT support rail (for a soft surface such as sand) is primarily designed for a soft surface, but also performs well on other surfaces (mud, concrete, etc.). The rail is easily replaceable and allows quick modification of the support system.

View

Adjustable sight CZ 75 SP-01 Shadow, CZ Shadow 2

Tuning

Adjustable sight CZ 75 SP-01 Shadow, CZ Shadow 2

High-quality and very precisely processed micro metrically adjustable rear sight with precise geometry for the CZ 75 SP Shadow and CZ Shadow 2 self-loading pistols. The cutout in the rear sight plate is 3 x 2.2 mm or 3 x 2.7 mm (width x depth). The micro metrically adjustable front sight is supplied without a front sight, which you can order separately,...

View

Adjustable sight CZ P-10

Tuning

Adjustable sight CZ P-10

High-quality and very precisely processed micrometric adjustable sight with precise geometry for CZ P-10 self-loading pistols. The cutout in the visor slice is 3 x 2.2mm (width x depth). The micro metrically adjustable front sight is supplied without a front sight, which you can order separately, depending on which weapon it will be mounted on. One click...

View

KeyMOD nut with bolt

Adapters, reducers, recoil pads

KeyMOD nut with bolt

Set of 4 spare screws with KeyMOD nuts.

View

M-LOK nut with bolt

Adapters, reducers, recoil pads

M-LOK nut with bolt

Set of 4 spare screws with M-LOK nuts.

View

Adjustable sight CZ P-10 FO

Tuning

Adjustable sight CZ P-10 FO

High-quality and very precisely processed micrometric adjustable sight with precise geometry for CZ P-10 self-loading pistols. The cutout in the visor slice is 3 x 2.3mm (width x depth). The micro metrically adjustable front sight is supplied without a front sight, which you can order separately, depending on which weapon it will be mounted on. One click...

View

Adjustable visor FO CZ 75 SP-01 Shadow, CZ Shadow 2

Tuning

Adjustable visor FO CZ 75 SP-01 Shadow, CZ Shadow 2

High-quality and very precisely processed micro metrically adjustable rear sight with precise geometry for self-loading pistols CZ 75 SP-01 Shadow and CZ Shadow 2. Cutout in the rear sight plate is 3 x 2.3 mm (width x depth). The micro metrically adjustable front sight is supplied without a front sight, which you can order separately, depending on which...

View

Adjustable sight Special CZ 75 SP-01 Shadow, CZ Shadow 2

Tuning

Adjustable sight Special CZ 75 SP-01 Shadow, CZ Shadow 2

High-quality and very precisely processed micrometrically adjustable rear sight with precise geometry for the CZ 75 SP-01 Shadow and CZ Shadow 2 self-loading pistols. The cutout in the rear sight plate is 3 x 2.2 mm (width x depth). The micro metrically adjustable front sight is supplied without a front sight, which you can order separately, depending on...

View

Shooting chrony Air Chrony MK1

Shooting chrony Air Chrony MK1 2

Shooting chronographs

Ballistic chronograph Air Chrony MK1

Ballistic chronograph Air Chrony MK1 is a modern tool intended for measuring the velocity and kinetic energy of a bullet. New model MK1 comes out from a popular model MK3 but has been modified to be mounted directly on the barrel. Air Chrony MK1 provides an excellent measurement accuracy, high resistance to interferences, possibility to measure under bad...

View

Trigger spring CZ 75 - 0.7

Tuning

Trigger spring CZ 75 - 0.7

Trigger spring for CZ 75 used to reduce trigger resistance and increase its accuracy. We recommend using it, for example, when converting a double-action trigger mechanism to a single-action one. This will give you a gentler squeeze of the trigger and, as a result, greater accuracy. The spring is suitable for most CZ 75 type pistols and can also be used...

View

Shooting chronograph Air Chrony MK1 SET

Shooting chronograph Air Chrony MK1 SET 2

Shooting chronographs

Ballistic chronograph Air Chrony MK1 SET

In this set you can get Air Chrony MK1 together with other accessories for a significant discount. Ballistic chronograph Air Chrony MK1 is a modern tool intended for measuring the velocity and kinetic energy of a bullet. New model MK1 comes out from a popular model MK3 but has been modified to be mounted directly on the barrel. Air Chrony MK1 provides an...

View

Trigger spring CZ 75 - 0.8

Tuning

Trigger spring CZ 75 - 0.8

Trigger resistance spring for CZ 75 used to reduce trigger resistance and increase its accuracy. We recommend using it, for example, when converting a double-action trigger mechanism to a single-action one. This will give you a gentler squeeze of the trigger and, as a result, greater accuracy. The spring is suitable for most CZ 75 type pistols and can...

View

Mounting Kit Air Chrony MK1

Mounting Kit Air Chrony MK1 2

Shooting chronographs

Sada pro uchycení air Chrony MK1

Spare rubber bands for mounting Air Chrony MK1 to the gun’s barrel. These bands have been made from very durable material and will serve you for a lot of years.

View

CZ 75 TS trigger spring - 0.7

Tuning

CZ 75 TS trigger spring - 0.7

Trigger resistance spring for CZ 75 TS used to reduce trigger resistance and increase its accuracy. The kit contains all the necessary components and can be assembled by an average skilled handyman. If you do not dare to mount it, entrust it to your gunsmith.

View

High quality and durable case for ballistic chronograph

Shooting chronographs

High quality and durable case for ballistic chronograph

High quality and durable case for Air Chrony ballistic chronograph and its accessories. This is the best possible protection of the ballistic chronograph from weather and mechanical damage. Suitable for all types of Air Chrony ballistic chronographs. Highly recommended!

View

Cock catch spring CZ 75 - 0.7

Tuning

Cock catch spring CZ 75 - 0.7

Cock catch spring for CZ 75 - 0.7 serving to increase trigger resistance. The kit contains all the necessary components and can be assembled by an average skilled handyman. If you do not dare to mount it, entrust it to your gunsmith.

View

Case for Air Chrono MK3

Case for Air Chrono MK3 2

Shooting chronographs

Case for Air Chrono MK3

Quality and durable case for ballistic chronograph Air Chrony MK3 provides the best protection against the elements or mechanical damage.

View

Cock catch spring CZ 75 - 0.8

Tuning

Cock catch spring CZ 75 - 0.8

Cock catch spring for CZ 75 - 0.8 serving to increase trigger resistance. The kit contains all the necessary components and can be assembled by an average skilled handyman. If you do not dare to mount it, entrust it to your gunsmith.

View

Case for Air Chrono MK1

Case for Air Chrono MK1 2

Shooting chronographs

Case for Air Chrono MK1

Quality and durable case for ballistic chronograph Air Chrony MK1 provides the best protection against the elements or mechanical damage.

View

Cock catch spring CZ 75 - 0.75

Tuning

Cock catch spring CZ 75 - 0.75

Cock catch spring for CZ 75 - 0.75 serving to increase trigger resistance. The kit contains all the necessary components and can be assembled by an average skilled handyman. If you do not dare to mount it, entrust it to your gunsmith.

View

Guide Support (Barrel Slid)

Guide Support (Barrel Slid) 2

Shooting chronographs

Guide Support (Barrel Slid)

Air Chrony barrel slid helps you to keep shooting through chronograph without unwanted horizontal or vertical inclination. This may help especially on competitions where the risk of damage is higher due to large number of shooters performing their measurements in a short time.

View

Precise barrel guidance CZ 75 - 16.3/12.8

Tuning

Precise barrel guidance CZ 75 - 16.3/12.8

High-quality and very accurate barrel guide CZ 75 - 16.3 / 12.8 has an optimal shape of the hole for the barrel. This guide perfectly minimizes the play between the guide of the barrel and the barrel. Thanks to this, it significantly reduces the dispersion of the weapon caused by excessive clearance in the barrel of the weapon. Please check the OD of the...

View

Tripod for Air Chrony 42-125 cm

Tripod for Air Chrony 42-125 cm 2

Shooting chronographs

Tripod for Air Chrony 42-125 cm

Sturdy and durable tripod with level for ballistic chronographs. Adjustable height between 42.5 and 125.5 cm.

View

Precise barrel guidance CZ 75 - 16.3/14.0

Tuning

Precise barrel guidance CZ 75 - 16.3/14.0

High-quality and very accurate barrel guide CZ 75 - 16.3 / 14.0 has an optimal shape of the hole for the barrel. This guide perfectly minimizes the play between the guide of the barrel and the barrel. Thanks to this, it significantly reduces the dispersion of the weapon caused by excessive clearance in the barrel of the weapon. Please check the OD of the...

View

Tripod 36 - 106 cm

Tripod 36 - 106 cm 2

Shooting chronographs

Tripod for Air Chrony 36 - 106 cm

Sturdy and durable tripod with level for ballistic chronographs. Adjustable height between 36.5 and 106.5 cm.

View

Precise barrel guidance CZ 75 - 17.3/14.0

Tuning

Precise barrel guidance CZ 75 - 17.3/14.0

High-quality and very accurate barrel guide CZ 75 - 17.3 / 14.0 has an optimal shape of the hole for the barrel. This guide perfectly minimizes the play between the guide of the barrel and the barrel. Thanks to this, it significantly reduces the dispersion of the weapon caused by excessive clearance in the barrel of the weapon. Please check the OD of the...

View

Tripod for Air Chrony

Tripod for Air Chrony 2

Shooting chronographs

Tripod for Air Chrony

Lightweight, compact yet sturdy tripod with adjustable head for ballistic chronographs.

View

Weaker return spring CZ 75 - 9 LBS

Tuning

Weaker return spring CZ 75 - 9 LBS

Weaker shutter return spring for CZ 75. By using this spring, you will achieve a better behavior of the weapon during the shot and easier handling of the shutter. Spring force is 9 LBS.

View

Mounting two-piece 25.4mm (1 ") on 11mm rail - HIGH

Weapon accessories

Mounting two-piece 25.4mm (1 ") on 11mm rail - HIGH

Two-piece HIGH duralumin mounting is designed for riflescopes with a larger objective, usually up to 60 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 25.4mm (1") tube. The mounting is designed for an 11 mm rail.

View

Weaker return spring CZ 75 - 10 LBS

Tuning

Weaker return spring CZ 75 - 10 LBS

Weaker shutter return spring for CZ 75. By using this spring, you will achieve a better behavior of the weapon during the shot and easier handling of the shutter. Spring force is 10 LBS.

View

Weaker return spring CZ 75 - 11 LBS

Tuning

Weaker return spring CZ 75 - 11 LBS

Weaker shutter return spring for CZ 75. By using this spring, you will achieve a better behavior of the weapon during the shot and easier handling of the shutter. Spring force is 11 LBS.

View

Mounting on weaver (picatinny) rail 30mm - LOW

Mounting on weaver (picatinny) rail 30mm - LOW 2

Weapon accessories

Mounting on weaver (picatinny) rail 30mm - LOW

Two-piece LOW duralumin mounting is designed for riflescopes with a smaller objective, usually up to 40 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 30mm tube. The mounting is designed for weaver (picatinny) rail.

View

Weaker Hammer spring CZ 75 - 63mm

Tuning

Weaker Hammer spring CZ 75 - 63mm

Weaker Hammer Spring for CZ 75 By using this spring, you will achieve a lower trigger resistance, especially in DA (Double Action) shooting mode. Simultaneously, with this weaker hammer spring, you can also use a weaker firing pin spring. This will prevent potential misfires.

View

Mounting on weaver (picatinny) rail 30mm - HIGH

Mounting on weaver (picatinny) rail 30mm - HIGH 2

Weapon accessories

Mounting on weaver (picatinny) rail 30mm - HIGH

Two-piece LOW duralumin mounting is designed for riflescopes with a smaller objective, usually up to 40 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 30mm tube. The mounting is designed for 11mm rail.

View

Waterproof Notebook JASE

Waterproof Notebook JASE 2

Practical accessories

Waterproof Notebook JASE

Pocket-sized waterproof notebook in green design. This notebook features a spiral binding that ensures maximum clarity of your notes. Its dark green cover is ideal for natural environments where white paper could reveal your position. The notebook contains 48 sheets of anti-reflective, waterproof green all-weather paper with horizontal lines. Thanks to...

View

Mounting two-piece 25.4mm (1") on weaver (picatinny) - HIGH

Weapon accessories

Mounting two-piece 25.4mm (1") on weaver (picatinny) - HIGH

Two-piece HIGH duralumin mounting is designed for riflescopes with a larger objective, usually up to 60 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 25.4mm (1") tube. The mounting is designed for weaver (picatinny) rail.

View

Weaker Hammer spring CZ 75 - 68mm

Tuning

Weaker Hammer spring CZ 75 - 68mm

Weaker Hammer Spring for CZ 75 By using this spring, you will achieve a lower trigger resistance, especially in DA (Double Action) shooting mode. Simultaneously, with this weaker hammer spring, you can also use a weaker firing pin spring. This will prevent potential misfires.

View

Two-piece mounting 30mm on 11mm rail - HIGH

Two-piece mounting 30mm on 11mm rail - HIGH 2

Weapon accessories

Two-piece mounting 30mm on 11mm rail - HIGH

Two-piece HIGH duralumin mounting is designed for riflescopes with a smaller objective, usually up to 40 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 30mm tube. The mounting is designed for 11mm rail.

View

Alignment Adapter for SA 58 (vz.58)

Alignment Adapter for SA 58 (vz.58) 2

Submachine gun SA 58 (vz 58, 585 etc.)

Alignment Adapter for SA 58 (vz.58)

The vz. 58 submachine gun was an excellent weapon for its time, and due to its design qualities, it is still in use by armed forces today. As for its popularity among civilian shooters, there's no need to elaborate extensively—nearly everyone knows it. Given its year of origin, the biggest design drawbacks of this weapon are the inability to mount optics...

View

One-piece mounting on weaver (picatinny) rail 30mm and 25,4m(1") with BUBBLE LEVEL

One-piece mounting on weaver (picatinny) rail 30mm and 25,4m(1") with BUBBLE LEVEL 2

Weapon accessories

One-piece mounting on weaver (picatinny) rail 30mm and 25,4m(1") with BUBBLE LEVEL

The one-piece duralumin mount with integrated bubble level is designed for riflescopes with lenses, usually up to 60 mm. Mounting is by means of screws on the right part of the mount. This mount is suitable for mounting rifle scopes or any other device with both 30mm and 25,4mm (1") tube (for smaller rifle scopes, defining links are included). The mount...

View

Weight 170g with MLOK Mounting System

Weight 170g with MLOK Mounting System 2

Tuning

Weight 170g with MLOK Mounting System

This 170g weight is designed for attachment to any stock equipped with the MLOK mounting system (e.g., MDT stock). Available in various colors, there's an option for everyone.

View

One-piece mounting 30mm / 25,4mm(1") on 11mm rail with BUBBLE LEVEL

One-piece mounting 30mm / 25,4mm(1") on 11mm rail with BUBBLE LEVEL 2

Weapon accessories

One-piece mounting 30mm / 25,4mm(1") on 11mm rail with BUBBLE LEVEL

The one-piece duralumin mount with integrated bubble level is designed for riflescopes with lenses, usually up to 60 mm. Mounting is by means of screws on the right part of the mount. This mount is suitable for mounting rifle scopes or any other device with both 30mm and 25,4mm (1") tube (for smaller rifle scopes, defining links are included). The mount...

View

Weight 280g with MLOK Mounting System

Weight 280g with MLOK Mounting System 2

Tuning

Weight 280g with MLOK Mounting System

This 280g weight is designed for attachment to any stock equipped with the MLOK mounting system (e.g., MDT stock). Available in various colors, there's an option for everyone.

View

High-Quality Oil Not Only for Firearms: Interflon Fin Super Dry Lube

High-Quality Oil Not Only for Firearms: Interflon Fin Super Dry Lube 2

Weapon accessories

High-Quality Oil Not Only for Firearms: Interflon Fin Super Dry Lube

Multi-purpose oil not only for firearms, which cleans, lubricates, preserves, and protects against oxidation.Lubricating oil with MicPol® sliding particles that provides high penetration for long-lasting lubrication. This is a high-quality multi-purpose oil for firearms, ammunition, and equipment that cleans, lubricates, preserves, and protects against...

View

One-piece mounting on weaver (picatinny) rail 30mm/25,4mm(1") with SLIDE

One-piece mounting on weaver (picatinny) rail 30mm/25,4mm(1") with SLIDE 2

Weapon accessories

One-piece mounting on weaver (picatinny) rail 30mm/25,4mm(1") with SLIDE

The one-piece duralumin mount with integrated base is designed for riflescopes with lenses, usually up to 60 mm. The mounting is by means of screws on the right part of the mount. This mount is suitable for mounting rifle scopes or any other device with both 30mm and 25,4mm tubes (for smaller rifle scopes, defining links are included). THIS MOUNT IS...

View

ARCA Swiss rail for UIT

ARCA Swiss rail for UIT 2

New

Weapon accessories

ARCA Swiss rail for UIT

The ARCA Swiss rail is a great addition to any rifle that has a chassis with an UIT clamping system. It can be used wherever the weapon uses a forend (chassis) with an UIT clamping system. A typical example is the weapons used for PRS shooting disciplines.This will give you a big advantage! You can easily move bipods or other accessories efficiently from...

View

Mounting on weaver (picatinny) rail 34mm

Mounting on weaver (picatinny) rail 34mm 2

Weapon accessories

Mounting on weaver (picatinny) rail 34mm

Two-piece duralumin mounting is designed for riflescopes with objective, usually up to 60 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 34mm tube. The mounting is designed for weaver (picatinny) rail.

View

Mounting two-piece 30mm on 11mm rail - LOW

Mounting two-piece 30mm on 11mm rail - LOW 2

Weapon accessories

Mounting two-piece 30mm on 11mm rail - LOW

Two-piece LOW duralumin mounting is designed for riflescopes with a smaller objective, usually up to 50 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 30mm. The mounting is designed for an 11 mm rail.

View

Mounting two-piece 25.4mm (1") on weaver (picatinny) - LOW

Mounting two-piece 25.4mm (1") on weaver (picatinny) - LOW 2

Weapon accessories

Mounting two-piece 25.4mm (1") on weaver (picatinny) - LOW

The two-piece LOW duralumin mount is designed for riflescopes with a smaller objective lens, usually up to 40 mm. Mounting is by screws on each part. This mount is suitable for mounting a rifle scope or any other device with a 25.4 mm (1") tube. The mounting is designed for weaver (picatinny) rail.

View

Mount SPRINGER RECOIL PROTECTOR on 11mm rail 30mm/25,4m

Mount SPRINGER RECOIL PROTECTOR on 11mm rail 30mm/25,4m 2

New

Weapon accessories

Mount SPRINGER RECOIL PROTECTOR on 11mm rail 30mm/25,4m

MOUNT SPRINGER RECOIL PROTECTOR 11mm The one-piece duralumin mount with integrated base is designed for riflescopes with lenses, usually up to 60 mm. The mounting is by means of screws on the right part of the mount. This mount is suitable for mounting rifle scopes or any other device with both 30mm and 25,4mm tubes (for smaller rifle scopes, defining...

View

Product added to wishlist

Product added to compare.