A set of springs used to reduce the resistance of the trigger from the factory 5kg to 2.5kg.
The CZ SCORPION EVO 3 weapon is designed from the ground up as a service weapon, and for this reason the resistance of the trigger and its characteristics are designed to maintain shooting safety even in crisis situations and shooting in gloves. During the production of the civilian self-loading version of this weapon, these characteristics of the trigger were preserved.
For most civilian shooters, these features are a nuisance, and therefore this set was created to reduce the resistance of the trigger from the original 5kg to 2.5kg.
The force of resistance is influenced by more factors than just the force of springs. Therefore, take the achievable resistance as a guide, it can vary by a few percent. Other factors are the roughness of the teeth (their machining from production or, conversely, polishing during use), scrubbing of the lever of the firing pin block against the cage of the trigger mechanism and the overall soiling of the mechanism with flue gases.
- 1 pc Set of springs to reduce the resistance of the trigger CZ SCORPION EVO 3
The set contains all the necessary components and its assembly can be done by an average skilled handyman. If you do not dare to assemble it, entrust it to your rifleman. It is not possible to shorten the operation, drop and reset of the trigger simply by replacing the springs, but by intervening in the tooth of the cock and the interrupter.
Tactical EVO offer, a great choice for your work and hobby.