TACTICAL EVO - Hlavní strana

Příslušenství pro zbraně, outdoor, lov a střelbu

Showing 1-121 of 121 item(s)

IN-LINE Buttstock reduction for SA vz.58

IN-LINE Buttstock reduction for SA vz.58 2

Submachine gun SA 58 (vz 58, 585 etc.)

IN-LINE Buttstock reduction for SA vz.58

Weaver mounting buttstock reduction system for SA vz. 58 and its clones. This reduction is designed specifically to use with our product: Weaver mount for SA vz. 58 and will allow you to quickly change the lock system of your buttstock. Available variants are mounting locks for FAB Defense, AR-style buffer, Zhukov Yugo style, or the original wooden and...

View

Weaver mounting on SA 58 (vz.58) with stock in IN-LINE...

Weaver mounting on SA 58 (vz.58) with stock in IN-LINE... 2

Submachine gun SA 58 (vz 58, 585 etc.)

Weaver mounting on SA 58 (vz.58) with stock in IN-LINE design

Weaver mounting on SA submachine gun vz. 58 is currently a necessary accessory for every shooter who is really serious about shooting from this iconic Czechoslovak self-loading assault rifle. Submachine gun vz. 58 was a great weapon for its time and for its design qualities it serves in the armed forces to this day. As for its popularity among civilian...

View

Bulletproof Vest

Bulletproof Vest 2

Tactical clothing and equipment

TAC 22-1 Plate Carrier (Bulletproof Vest)

The plate carrier TAC 22-1 is a universal and high-quality ballistic plate carrier (ballistic-bulletproof plates). The entire set is designed to be fully compatible with most commonly available soft and hard ballistic plates (ballistic protective plates-plates).The plate carrier TAC 22-1 (ballistic vest) is intended for full-scale use both in the...

View

WEAVER rail for Sig Sauer SSG 300

WEAVER rail for Sig Sauer SSG 300 2

Tuning

WEAVER rail (picatinny) for Sig Sauer SSG 3000

Precisely made WEAVER rail (set) designed to attach to the stock of the Sig Sauer SSG 3000 rifle.Sig Sauer SSG 3000 is a great weapon designed for accurate shooting at long distances, but the stock unfortunately does not have at the bottom of the rail WEAVER. There are only two screws of the SWIVEL system, which is not an optimal.Our WEAVER kit eliminates...

View

Plate carrier TAC 22-2

Plate carrier TAC 22-2 2

Tactical clothing and equipment

Plate carrier TAC 22-2

The plate carrier TAC 22-2 is a universal and high-quality ballistic plate carrier (ballistic-bulletproof plates). The entire set is designed to be fully compatible with most commonly available soft and hard ballistic plates (ballistic protective plates-plates).The plate carrier TAC 22-2 (ballistic vest) is intended for full-scale use both in the...

View

Plate carrier TAC 22-3

Plate carrier TAC 22-3 2

Tactical clothing and equipment

Plate carrier TAC 22-3

The plate carrier TAC 22-3 is a universal and high-quality ballistic plate carrier (ballistic-bulletproof plates). The entire set is designed to be fully compatible with most commonly available soft and hard ballistic plates (ballistic protective plates-plates).The plate carrier TAC 22-3 (ballistic vest) is intended for full-scale use both in the...

View

Muzzle brake with high efficiency M18x1

Muzzle brake with high efficiency M18x1 2

Muzzle brake and compensator

Muzzle brake SAR2 (CERAKOTE)

The muzzle brake is a device that eliminates the negative effects of forces acting on the shooter and the weapon after the shot. It changes the direction of the flow of gases escaping during the shot from the barrel and thus compensates for the recoil and dampens the impact of the shot. Our SAR2 muzzle brake not only compensates for recoil and shot, but...

View

Trigger guard CZ 457 (tactical)

Trigger guard CZ 457 (tactical) 2

Tuning

Trigger guard CZ 457 (tactical)

The new tactical trigger guard for small-bore rifle CZ 457 can be now purchased as a supplement to your small-bore rifle. Trigger guard is made of quality duralumin and it is possible to order it in five colour design (black, blue, red, khaki and gold). Colour design is solved by Cerakote spraying and the trigger guard itself is designed to best suit new...

View

Muzzle brake 5/8x24UNF

Muzzle brake 5/8x24UNF 2

Muzzle brake and compensator

Muzzle brake SAR2 (blackening)

The muzzle brake is a device that eliminates the negative effects of forces acting on the shooter and the weapon after the shot. It changes the direction of the flow of gases escaping during the shot from the barrel and thus compensates for the recoil and dampens the impact of the shot. Our SAR2 muzzle brake not only compensates for recoil and shot, but...

View

Camouflage sniper jacket 4th generation

Camouflage sniper jacket 4th generation 2

Tactical clothing and equipment

Camouflage sniper jacket "DIVERZANT" 4th generation

The DIVERZANT 4th generation camouflage sniper jacket was developed based on the experience of the previous project and in turn became the flagship of the Diverzant range.Sniper jacket DIVERZANT is so unique, comfortable and functional that the use of this versatile garment will replace at least five other modern separate elements that are commonly used...

View

Camouflage pants DIVERZANT 4th generation

Camouflage pants DIVERZANT 4th generation 2

Tactical clothing and equipment

Camouflage pants DIVERZANT 4th generation

Camouflage pants DIVERZANT 4th generation are designed not only for snipers, but for all who do not want to be seen for any reason (observers, hunters, photographers or airsoft lovers).The 4th generation DIVERZANT camouflage trousers were developed based on the experience of the previous project and in turn, together with the camouflage jacket, became the...

View

Muzzle brake F1 PRO (color CERAKOTE)

Muzzle brake F1 PRO (color CERAKOTE) 2

Muzzle brake and compensator

Muzzle brake F1 PRO (color CERAKOTE)

The F1 PRO muzzle brake is a highly effective five-chamber brake with an exhaust channel that prevents the weapon from bouncing sideways. Its chambers are designed to not only extremely dampen the recoil and lateral rebound of the weapon, but also prevent its vertical rebound.Test shooters described its effect: "It's like pulling a shotgun to the ground...

View

Muzzle brake F1 PRO (blackening)

Muzzle brake F1 PRO (blackening) 2

Muzzle brake and compensator

Muzzle brake F1 PRO (blackening)

The F1 PRO muzzle brake is a highly effective five-chamber brake with an exhaust channel that prevents the weapon from bouncing sideways. Its chambers are designed to not only extremely dampen the recoil and lateral rebound of the weapon, but also prevent its vertical rebound.Test shooters described its effect: "It's like pulling a shotgun to the ground...

View

Bipod TACTICAL PRS 6,5-8" (WEAVER)

Bipod TACTICAL PRS 6,5-8" (WEAVER) 2

SPECIAL OFFERS

Bipod TACTICAL PRS 6,5-8" (WEAVER)

ACTION !!! DISCOUNT !!! ONLY 1 PIECE - VALID UNTIL SOLD OUT Used but 100% functional goods with a FULL WARRANTY. This is a new product (demonstration piece), which shows signs of slight wear. Bipod Tactical Evo PRS is made of high quality duralumin AW 7075 and extremely precisely machined. Bipod Tactical Evo PRS (WEAVER) is a great choice for every...

View

Camouflage hat ATOMAN

Camouflage hat ATOMAN 2

Tactical clothing and equipment

Camouflage hat ATOMAN

Camouflage hats ATOMAN are developed for quick, efficient and easy camouflage and breakage of the shoulders silhouette. The whole hat is well aired, so it provides maximum comfort even at high temperatures and together with low weight is optimal for the most of operations, where is necessary not to be seen. A characteristic feature of the camouflage hat...

View

Tactical cap KONTRAKTOR

Tactical cap KONTRAKTOR 2

Tactical clothing and equipment

Tactical cap KONTRAKTOR

Cap KONTRAKTOR is made of high quality fabric and designed in a modern style. The cap fits very well on the head and its size can be adjusted using the Velcro at the back. To attach identity identifiers (national flags, unit emblem), personal identifiers (name, blood type) or infrared tags, the front, top and back are equipped with Velcro.The tactical cap...

View

Camouflage HOOD (BACLAVA)

Camouflage HOOD (BACLAVA) 2

Tactical clothing and equipment

Camouflage HOOD (BACLAVA)

The baclava is designed to perfectly mask the contours of the face and, together with other camouflage accessories, will allow you to literally disappear before your eyes. The baclava is supplied in two camouflage variants (MultiCAM, PenCott Green Zone) and is intended for both hunters and business use.The fabric is cross-linked and highly breathable, so...

View

Muzzle brake CZ SCORPION EVO 3 (M18x1)

Muzzle brake CZ SCORPION EVO 3 (M18x1) 2

Muzzle brake and compensator

Muzzle brake CZ SCORPION EVO 3 (M18x1)

Muzzle brake SAR2 for CZ SCORPION EVO 3 is a highly effective three-chamber brake with an exhaust channel preventing the side bounce of the weapon. Its chambers are designed so that there is no negative exhaust of post-firing gases towards the shooter. Of the technical parameters, it is definitely worth mentioning the easy installation, locking the brake...

View

Camouflage HOOD (BACLAVA)

Camouflage HOOD (BACLAVA) 2

Tactical clothing and equipment

Camouflage HOOD (BACLAVA)

The BACLAVA camouflage hood is designed for perfect masking of facial contours and, together with other camouflage accessories, will allow you to literally disappear before your eyes. This camouflage hood is supplied in KHAKI color and is intended for both hunters and business use.The camouflage hood is made for quick and easy camouflage and its size is...

View

Muzzle brake CZ SCORPION EVO3 (CERAKOTE, M18x1)

Muzzle brake CZ SCORPION EVO3 (CERAKOTE, M18x1) 2

Muzzle brake and compensator

Muzzle brake CZ SCORPION EVO3 (CERAKOTE, M18x1)

The SAR2 muzzle brake for the CZ SCORPION EVO 3 is a highly effective three-chamber brake with an exhaust channel preventing the weapon from bouncing sideways. Its chambers are designed so that there is no negative exhaust of post-firing gases towards the shooter. Of the technical parameters, it is definitely worth mentioning the easy installation,...

View

SWIVEL Modul

SWIVEL Modul 2

SPECIAL OFFERS

Adapter from SWIVEL system (screw with hole) to WEAVER

ACTION !!! DISCOUNT !!! VALID UNTIL SOLD OUT Used but 100% functional goods with a FULL WARRANTY. This is a new product (demonstration piece), which shows signs of slight wear. Universal adapter from the SWIVEL system (this is the screw with a hole that is usually used to fasten the belt) to the WEAVER system (picatinny rail). The reduction (adapter) is...

View

Camouflage hooded vest (long)

Camouflage hooded vest (long) 2

Tactical clothing and equipment

Camouflage hooded vest (long)

The camouflage hooded vest is designed to perfectly mask the head and body of a shooter, sniper, observer or hunter. The camouflage vest extends the outline of the camouflaged person´s head, neck and shoulders, which will make him significantly less visible in the background (cover or other vegetation). The basis of the camouflage vest is camouflage...

View

Muzzle brake F1 PRO for CZ SCORPION (M18x1)

Muzzle brake F1 PRO for CZ SCORPION (M18x1) 2

Muzzle brake and compensator

Muzzle brake F1 PRO for CZ SCORPION (M18x1)

The F1 PRO muzzle brake for CZ SCORPION EVO 3 is a highly effective five-chamber brake with an exhaust channel that prevents the weapon from bouncing sideways. Its chambers are designed to not only extremely dampen the recoil and lateral rebound of the weapon, but also prevent its vertical rebound.Of the technical parameters, it is definitely worth...

View

Adjustable RECOIL PAD (universal)

Adjustable RECOIL PAD (universal) 2

Weapon accessories

Adjustable RECOIL PAD (universal)

The universal adjustable recoil pad mechanism is designed for all types of stocks. The adjustable mechanism of the recoil pad was developed with regard to the needs of shooters to easily and quickly change its settings.It is possible to use practically any rubber recoil pad that suits you on our height and length adjustable mechanics, or you can buy ATI...

View

Muzzle brake F1 PRO for CZ SCORPION (CERAKOTE, M18x1)

Muzzle brake F1 PRO for CZ SCORPION (CERAKOTE, M18x1) 2

Muzzle brake and compensator

Muzzle brake F1 PRO for CZ SCORPION (CERAKOTE, M18x1)

The F1 PRO muzzle brake for CZ SCORPION EVO 3 is a highly effective five-chamber brake with an exhaust channel that prevents the weapon from bouncing sideways. Its chambers are designed to not only extremely dampen the recoil and lateral rebound of the weapon, but also prevent its vertical rebound.Of the technical parameters, it is definitely worth...

View

Camouflage hooded vest

Camouflage hooded vest 2

Tactical clothing and equipment

Camouflage hooded vest

The camouflage hooded vest is designed to perfectly mask the head of a shooter, sniper, observer or hunter. The camouflage vest extends the outline of the camouflaged person´s head, neck and shoulders, which will make him significantly less visible in the background (cover or other vegetation). The basis of the camouflage vest is camouflage fabric...

View

Muzzle brake PCC (1/2x28 UNF)

Muzzle brake PCC (1/2x28 UNF) 2

Muzzle brake and compensator

Muzzle brake PCC (1/2x28 UNF)

The muzzle brake is a device that eliminates the negative effects of forces acting on the shooter and the weapon after the shot. It changes the flow direction of the gases escaping from the barrel, thus compensating for the recoil and dampening the impact of the shot. Our PCC muzzle brake not only compensates for recoil and shot, but also prevents the...

View

Tuning trigger CZ SCORPION EVO 3

Tuning trigger CZ SCORPION EVO 3 2

Tuning

Tuning trigger CZ SCORPION EVO 3

The trigger is designed for all those who want to fit their weapon with something unconventional and exceptional. Installing the trigger is very easy, so you're done in minutes.The trigger is made of high quality material AW 7075 and the surface treatment is solved with black or red anodized.We recommend using it in combination with a tension lever of a...

View

Muzzle brake PCC for CZ SCORPION EVO CARABINE (1/2x28UNF))

Muzzle brake PCC for CZ SCORPION EVO CARABINE (1/2x28UNF)) 2

Muzzle brake and compensator

Muzzle brake PCC for CZ SCORPION EVO CARABINE (1/2x28UNF))

The PCC muzzle brake is designed for the CZ SCORPION EVO CARABINE and not only compensates for recoil and shot, but also prevents the weapon from bouncing after the shot.The muzzle brake is a device that eliminates the negative effects of forces acting on the shooter and the weapon after the shot. It changes the flow direction of the gases escaping from...

View

Camouflage hoods HEJKAL (BARBER)

Camouflage hoods HEJKAL (BARBER) 2

Tactical clothing and equipment

Camouflage hoods HEJKAL (BARBER)

Camouflage hood HEJKAL is developed for quick, efficient and easy camouflaging. The hood is designed to perfectly camouflage head of a shooter, sniper, observer, hunter or airsoft lover. Camouflage hood is widening outline of a camouflaged person´s head, neck and shoulders, making it significantly less visible in the background (cover and other...

View

Camouflage face MASK

Camouflage face MASK 2

Tactical clothing and equipment

Camouflage face MASK

The camouflage face mask is designed to perfectly mask the contours of the face and, together with other camouflage accessories, will allow you to literally disappear before your eyes. The camouflage face mask is supplied in two camouflage variants (MultiCAM, PenCott Green Zone) and is intended for both hunters and business use.The fabric is cross-linked...

View

Fuse cover for CZ SCORPION EVO 3

Fuse cover for CZ SCORPION EVO 3 2

Tuning

Safety cover for CZ SCORPION EVO 3

Safety cover for CZ SCORPION EVO 3.Are you not using the safety on the right or left side of the weapon? You can easily blind the unused side. Blinding an unused safety is very easy and you can handle it in a few seconds.

View

External WEAVER for mirage band

External WEAVER for mirage band 2

Weapon accessories

External WEAVER for mirage band

External WEAVER handle of lenta (mirage band - heat screen) for situations, when a rifle isn´t equipped with the handle in standard. Our handle is ready for installation on the weaver rail and it is suitable for any regular lenta (mirage band). Handle of lenta is easilly installed on weaver rail (approx. 10 sec.), light and made of quality aerial...

View

Insulation ring for CZ SCORPION EVO 3

Insulation ring for CZ SCORPION EVO 3 2

Tuning

Insulation ring for CZ SCORPION EVO 3

Insulation ring for CZ SCORPION EVO 3. The ring is made on CNC from a very high quality material AW 7075. The surface treatment is solved with black or red anodized.In the production documentation of CZ SCORPION EVO it is part no.5. The original part is made of plastic and after about 10,000 shots it breaks, thanks to which the forearm begins to move...

View

Camouflage hat DIVERZANT

Camouflage hat DIVERZANT 2

Tactical clothing and equipment

Camouflage hat DIVERZANT

Camouflage hats DIVERZANT are developed for quick, efficient and easy camouflage and breakage of the shoulders silhouette. The whole hat is well aired, so it provides maximum comfort even at high temperatures and together with low weight is optimal for the most of operations, where is necessary not to be seen. A characteristic feature of the camouflage...

View

Mirage band elastic (thermal shield)

Mirage band elastic (thermal shield) 2

Weapon accessories

Mirage band elastic (thermal shield)

The (Lenta) mirage band is designed for all types of rifles and is made from a highly durable and elastic material designed to divert heat from the barrel to prevent negative thermal effects from the mirage. The mirage is a thermal phenomenon that causes optical illusion. The Lenta (mirage band - thermal shield) helps to eliminate this.

View

Tuning tension lever CZ SCORPION EVO 3

Tuning tension lever CZ SCORPION EVO 3 2

Tuning

Tuning charging handle CZ SCORPION EVO 3

Tuning charging handle for CZ SCORPION EVO 3. The charging handle is extended compared to the plastic original and its design corresponds to other tuning accessories for CZ SCORPION EVO 3, which we sell. Installing the charging handle is very easy, so you're done in minutes.The handle is made of high quality material AW 7075 and the surface treatment is...

View

Mirage band elastic (thermal shield)

Mirage band elastic (thermal shield) 2

Weapon accessories

Mirage band elastic (thermal shield)

The (Lenta) mirage band is designed for all types of rifles and is made from a highly durable and elastic material designed to divert heat from the barrel to prevent negative thermal effects from the mirage. The mirage is a thermal phenomenon that causes optical illusion. The Lenta (mirage band - thermal shield) helps to eliminate this.

View

Backpack EXPEDICE, medium size (65-75 liters)

Backpack EXPEDICE, medium size (65-75 liters) 2

Tactical clothing and equipment

Backpack EXPEDICE, medium size (65-75 liters)

Backpack EXPEDICE is ranked among medium-sized backpacks (65-75 liters) and has been produced since 2016.Based on the experience of your users, we are constantly modernizing it and improving its utility properties. The backpack is sewn in a classic style and comes with one upper and two additional pockets.The whole backpack is equipped with MOLLE system...

View

Tunning trigger for CZ P-10 (red)

Tunning trigger for CZ P-10 (red) 2

Tuning

Tunning trigger for CZ P-10 (red)

Tuning trigger for CZ P-10 pistol. The trigger is made of high quality AW 7075 material and the surface treatment is solved with black or red anodized. Installation is easy, so you're done in minutes and your pistol gets an interesting design element.We recommend using it in combination with an extended magazine capture of a similar design.

View

Backpack "KADET", small size (15 liters)

Backpack "KADET", small size (15 liters) 2

Tactical clothing and equipment

Backpack "KADET", small size (15 liters)

Urban backpack KADET (15 liters) is designed to be compact and suit the design of modern times.It is a comfortable and compact city backpack. Ideal for sports, cycling or roller skating, weekend trips, forest or fitness. What's more ... it goes with military clothing. Backpack KADET is supplied in three colors.

View

Mirage band carrier (front and back part)

Mirage band carrier (front and back part) 2

Weapon accessories

Mirage band carrier (front and back part)

The set of lenta (mirage band) carriers. The set contains two parts of the carrier. The first one attaches to the front of the barrel and the second one attaches to the receiver. This is a spare part for lenta (mirage band), which we sell as a separate product on this website, but it can also be used as a proper base if you want to make a heat screen...

View

Weapon wiper for all calibers

Weapon wiper for all calibers 2

Weapon accessories

Weapon wiper for all calibers

View

Tunning trigger for CZ P-10 (black)

Tunning trigger for CZ P-10 (black) 2

Tuning

Tunning trigger for CZ P-10 (black)

Tuning trigger for CZ P-10 pistol. The trigger is made of high quality AW 7075 material and the surface treatment is solved with black or red anodized. Installation is easy, so you're done in minutes and your pistol gets an interesting design element.We recommend using it in combination with an extended magazine capture of a similar design.

View

Backpack TRIDENAK, small size (40 liters)

Backpack TRIDENAK, small size (40 liters) 2

Tactical clothing and equipment

Backpack TRIDENAK, small size (40 liters)

Universal backpack TRIDENAK is ranked among small size backpacks (40 liters). It is a very precisely processed and balanced product that combines all the necessary features, both for everyday use and for use in the most difficult conditions. The whole backpack is equipped with MOLLE system and allows maximum modularity and interchangeability of individual...

View

Carbon rods for our LUXURY weapon wiper

Weapon accessories

Carbon rods for our LUXURY weapon wiper

Carbon rods for our LUXURY weapon wiper. We supply carbon rods in diameters of 4, 5, 6, 7, 8 and 10 mm and in lengths of 350, 450, 550, 650, 750, 850, 950 and 1050 mm. So all you need to clean your weapons is a handle, and you put carbon rods in it as you see fit. Replacing one rod with another does not take more than 1 second!The thread at the end of the...

View

Extended magazine catch CZ P-10

Extended magazine catch CZ P-10 2

Tuning

Extended magazine catch CZ P-10

Extended magazine catch CZ P-10. The catch is made of high quality AW 7075 material and the surface treatment is solved with black or red anodized. Installation is easy, so you are done in a few minutes and your pistol will get an interesting and above all functional design element.Designed for the version with a rotating catch. It doesn't work on the...

View

Small Shooting Bag

Small Shooting Bag 2

Shooting bags, case, pads and accessories

Small Shooting Bag

Optimal tool to stabilise shooting and safe insertion of a weapon.Practical shooting bags for accurate shooting at extremely long-range are produced in a small series with a focus on 100% quality production and material.Made in the EU.

View

Stock screw SA 58 (vz 58, 585 and clones)

Stock screw SA 58 (vz 58, 585 and clones) 2

Tuning

Stock screw SA 58 (vz 58, 585 and clones)

Modernized version of the stock screw for SA 58 submachine gun (vz 58 and clones) on an Allen key. A big problem with the original screw, which has a classic "screw groove", is very complicated tightening or loosening of this screw. Either the screw cannot be tightened properly or, conversely, cannot be loosened. The stock screw we sell solves this...

View

Medium Shooting BAG

Medium Shooting BAG 2

Shooting bags, case, pads and accessories

Medium Shooting BAG

Optimal tool to stabilise shooting and safe insertion of a weapon.Practical shooting bags for accurate shooting at extremely long-range are produced in a small series with a focus on 100% quality production and material.Made in the EU.

View

Forehead breech for CZ P-10

Forehead breech for CZ P-10 2

Tuning

Forehead breech for CZ P-10

Dural breech for CZ P-10 pistol. Breech is made of high quality material AW 7075 and the surface treatment is solved with black or red anodized. Installation is easy, so you're done in minutes and your pistol gets a new and extraordinary dimension.It also works with the first generation pistol.

View

Large Shooting BAG

Large Shooting BAG 2

Shooting bags, case, pads and accessories

Large Shooting BAG

Optimal tool to stabilise shooting and safe insertion of a weapon.Practical shooting bags for accurate shooting at extremely long-range are produced in a small series with a focus on 100% quality production and material.Made in the EU.

View

Shooting Bag Universal

Shooting Bag Universal 2

Shooting bags, case, pads and accessories

Shooting Bag Universal

Optimal tool to stabilise shooting and safe insertion of a weapon. Practical shooting bags for accurate shooting at extremely long-range are produced in a small series with a focus on 100% quality production and material.Made in the EU.

View

Filler for shooting BAG

Filler for shooting BAG 2

Shooting bags, case, pads and accessories

Filler for shooting BAG

Quality and favourite filling material DELTA to shooting bags of all types and sizes. Material is made from plastic, has lenticular form, doesn´t change itś volume, is waterproof and has optimal weight. It is very universal and favourite material, that we use for filling all of our bags and we can reccomend it.

View

ARCA Swiss rail for M-LOK

ARCA Swiss rail for M-LOK 2

Weapon accessories

ARCA Swiss rail for M-LOK

The ARCA Swiss rail is a great addition to any rifle that has a chassis with an M-LOK clamping system. It can be used wherever the weapon uses a forend (chassis) with an M-LOK clamping system. A typical example is the weapons used for PRS shooting disciplines.This will give you a big advantage! You can easily move bipods or other accessories efficiently...

View

Fast Ammo 2 pin

Fast Ammo 2 pin 2

Weapon accessories

Fast Ammo 2 pin

Fast Ammo 2 is an easy way to refill your capacity and also to quickly reload your weapon. The tactical accessory is easy to install with a Velcro fastener. Fast Ammo 2 is designed for ammo from .223 through .308 to .338 calibre.

View

Fast Ammo 3 pin

Fast Ammo 3 pin 2

Weapon accessories

Fast Ammo 3 pin

Fast Ammo 3 is your easy way to refill capacity and also to quickly reload your weapon. The tactical accessory is easy to install via the Velcro fastener, which is included in the delivery and can also be ordered separately. The Fast Ammo 3 is designed for 3 extra ammo (from .223 through .308 to .338 calibre)

View

Ammo Kit including 20 pin panel

Ammo Kit including 20 pin panel 2

Weapon accessories

Ammo Kit including 20 pin panel

Ammo Kit is a complete set with 20-pin panel. This kit is your easy way to increase the ammunition carried while maintaining maximum storage and protection of the ammunition from external influences.Ammo Tactical 20 cartridge panel included! Of course, the whole set is cheaper than if you bought it separately.

View

Ammo Kit including 10 pin panel

Ammo Kit including 10 pin panel 2

Weapon accessories

Ammo Kit including 10 pin panel

Ammo Kit is a complete set with 10-pin panel. This kit is your easy way to increase the ammunition carried while maintaining maximum storage and protection of the ammunition from external influences.Ammo Tactical 10 cartridge panel included! Of course, the whole set is cheaper than if you bought it separately.

View

Trigger resistance spring CZ 557, 550 and 527

Tuning

Trigger resistance spring CZ 557, 550 and 527

Spring used to reduce the resistance of the trigger CZ 557, CZ 550, CZ 527 and increase its accuracy.Using the trigger spring, you can reduce the resistance of the trigger up to 0.5 kg.When the lowest trigger resistance is set, firing may occur when the weapon is unlocked! This fact must be taken into account! For the above reasons, we do not recommend...

View

Ammo Tactical Panel (20 pieces)

Ammo Tactical Panel (20 pieces) 2

Weapon accessories

Ammo Tactical Panel (20 pieces)

The Ammo Tactical 20 panel is an easy way of increasing the amount of ammunition carried while maintaining maximum ammunition storage and protection from external influences. The Ammo Tactical 20 is designed for 20 pieces of .223 through .308 to .338 calibre and great emphasis was placed on the production quality and therefore the product’s resistance to...

View

CZ 457 trigger resistance springs

Tuning

CZ 457 trigger resistance springs

A set of springs used to reduce the resistance of the CZ 457 trigger and increase its accuracy.The set includes two springs, with the trigger spring reducing the factory resistance of the trigger by -50% and the impact spring, which has a 10% higher resistance. Using the trigger spring, you can reduce the trigger resistance to 0.5 kg.A stronger impact...

View

Panel Ammo Tactical (10 pieces)

Panel Ammo Tactical (10 pieces) 2

Weapon accessories

Panel Ammo Tactical (10 pieces)

The Ammo Tactical 10 panel is an easy way of increasing the amount of ammunition carried while maintaining maximum ammunition storage and protection from external influences. The Ammo Tactical 10 panel is designed for 10 pieces from .223 through .308 to .338 calibres and when it was produced, great emphasis was put on the production quality and therefore...

View

Trigger resistance spring TIKKA T3, T3x and T1x

Tuning

Trigger resistance spring TIKKA T3, T3x and T1x

Spring used to reduce the resistance of the trigger for TIKKA T3, T3x, T1x and increase its accuracy.Using the trigger spring, you can reduce the resistance of the trigger up to 0.5 kg. When the lowest trigger resistance is set, firing may occur when the weapon is unlocked! This fact must be taken into account! For the above reasons, we do not recommend...

View

Ammo Cover (20-10)

Ammo Cover (20-10) 2

Weapon accessories

Ammo Cover (20-10)

The Ammo Cover (20-10) is very high quality processed and designed to be fitted with Ammo Tactical 20 and Ammo Tactical 10 hubs. The Tactical Ammo Cover is an easy way of increasing the ammunition you’re able to carry while maintaining maximum storage and protection of ammunition from external effects. During production, great emphasis was placed on the...

View

Trigger resistance springs for CZ 455 / ZKM 452

Tuning

Trigger resistance springs for CZ 455 / ZKM 452

A set of springs used to reduce the resistance of the CZ 455 trigger from the factory 1.3 kg to 0.3 kg, according to your preferences. The strength of the trigger resistance is affected by more factors than just the force of the springs. Therefore, take the achievable resistance as a guide, it can vary by a few percent. The adjusting nuts on the spring...

View

Shooting pad

Shooting pad 2

Weapon accessories

Shooting pad

Original shooting pad made from highly durable materials. Indispensable equipment not only for outdoor shooters. The bottom layer is rubberised, a plastic foam filling, a top layer of Cordura. The front part has a practical folding window with a transparent foil for the placement of ballistic tables and other aids. Quality pad for greater comfort in...

View

Trigger resistance springs CZ P-10

Tuning

Trigger resistance springs CZ P-10

The set of springs is used to reduce the resistance of the trigger of the CZ P-10 pistol. Our set of springs is fully compatible with variants of pistols S, C, SC, F and contains two versions of the impact spring.One reduces the resistance of the trigger by 0.25 kg, the other by 0.5 kg, so it only depends on you which variant you choose.The springs are...

View

Outdoor tactical pad EXTREME

Outdoor tactical pad EXTREME 2

Weapon accessories

Outdoor tactical pad EXTREME

The EXTREME outdoor tactical pad has been manufactured continuously since 2014, is made of highly durable materials and has been tested by dozens of tourists, sport shooters and soldiers.The bottom layer is rubberised to protect against moisture in the wet or snow. The inner layer is made of plastic foam for comfort when lying on a rocky surface. The top...

View

SAKO 75, 85, 595 and 695 trigger resistance spring

Tuning

SAKO 75, 85, 595 and 695 trigger resistance spring

Spring used to reduce the resistance of the trigger SAKO 75, 85 595, 695 and increase its accuracy.Using the trigger spring, you can reduce the resistance of the trigger up to 0.5 kg.When the lowest trigger resistance is set, firing may occur when the weapon is unlocked! This fact must be taken into account! For the above reasons, we do not recommend...

View

Trigger resistance springs for CZ SCORPION EVO

Tuning

Trigger resistance springs for CZ SCORPION EVO

A set of springs used to reduce the resistance of the trigger from the factory 5kg to 2.5kg. The CZ SCORPION EVO 3 weapon is designed from the ground up as a service weapon, and for this reason the resistance of the trigger and its characteristics are designed to maintain shooting safety even in crisis situations and shooting in gloves. During the...

View

Buttstock cover (genuine leather)

Buttstock cover (genuine leather) 2

Weapon accessories

Buttstock cover (genuine leather)

Additional cheekpiece for the stock. The cheekpiece is very well made, it is sewn from genuine leather and it can be easily and quickly attached to any classic stock. Attachment to the stock is done with Velcro. Variability is ensured by several foam pads, thanks to which you can easily achieve an additional increase of the cheek by approximately 20 mm...

View

Browning X-BOLT trigger resistance spring

Tuning

Browning X-BOLT trigger resistance spring

Spring used to reduce the resistance of the trigger Browning X-BOLT and increase its accuracy.Using the trigger spring, you can reduce the resistance of the trigger up to 0.5 kg.When the lowest trigger resistance is set, firing may occur when the weapon is unlocked! This fact must be taken into account! For the above reasons, we do not recommend setting...

View

Walther LG 300 / LG 400

Walther LG 300 / LG 400 2

Tuning

Walther steel cartridge plug

Spare part for WALTHER steel cartridges.Long-term use of some Walther steel cartridges wears out the thread on the cartridge. This is manifested mainly by the fact that there is a layer of small brass sawdust in the area of the pressure regulator.Over time, the thread on the cartridge becomes so worn that the thread does not withstand the air pressure...

View

T-shirt Tactical EVO (black and khaki green)

T-shirt Tactical EVO (black and khaki green) 2

Tactical clothing and equipment

T-shirt Tactical EVO (black and khaki green)

Very high quality and durable Tactical EVO t-shirt in sizes XS, S, M, L, XL and two possible colors (black, dark green). The T-shirt is made of high-quality materials that do not irritate the skin and are very pleasant to touch and wear.Thanks to the structure of the knitting and the special shape of the fiber, it wicks away sweat perfectly, which in...

View

Filling PIN for WALTHER air rifles (universal)

Filling PIN for WALTHER air rifles (universal) 2

Tuning

Filling PIN for WALTHER air rifles (universal)

Universal filling PIN (valve) for WALTHER air rifles and pistols. The filling pin is designed for both types of cylinders, so it can be mounted on both 200 and 300 bar pressure bottles (bombs).

View

T-shirt Tactical EVO (black and sand)

T-shirt Tactical EVO (black and sand) 2

Tactical clothing and equipment

T-shirt Tactical EVO (black and sand)

Tactical EVO T-shirt in sizes S, M, L, XL and two possible colors (black, sand). The T-shirt is made of quality materials that do not irritate the skin and is very pleasant to the touch and wear.The T-shirt is universal for both women and men and will also serve as a gift 100%.

View

Enlargement of the Walther LG 300 pressure regulator chamber

Enlargement of the Walther LG 300 pressure regulator chamber 2

Tuning

Enlargement of the Walther LG 300 pressure regulator chamber

Ring for enlarging the chamber of the pressure regulator for the Walther LG 300 air rifle.The chamber of the standard pressure regulator of the PCP air rifle Walther LG 300 is designed for shooting with a power of 7.5J. With our rings, you can easily achieve an enlargement of the chamber and thus the possibility to set the power of the Walther LG 300 air...

View

Vegetation attachment system

Vegetation attachment system 2

Tactical clothing and equipment

Vegetation attachment system

Rubber with a plastic clip for additional attachment of vegetation is an easy, fast and proven way to attach vegetation or any other small object to clothing. It is a proven and long-term used tool. This tool works very comfortably and quickly in any situation. The total length of the rubber is 21 cm, diameter 4 mm and is available in green (khaki).

View

CARBON PLASTER Tecasorb (first aid)

CARBON PLASTER Tecasorb (first aid) 2

Practical accessories

CARBON PLASTER Tecasorb (first aid)

Tecasorb are absorbent covering nano dressings or plasters with a carbon layer, made from active carbon textile. Tecasorb is easy to use and supports faster healing. It is durable and has lasting absorbent properties. For significantly infected wounds, the dressing should be changed every 6-12 hours at the beginning. After improvement, the optimal...

View

Reduction for Walther LG 400

Reduction for Walther LG 400 2

Tuning

Reduction for Walther LG 400

By replacing the pressure regulator from the LG 400 with a pressure regulator from the LG 300, you will get much greater setting options and the excellent Walther LG 400 air rifle will thus enter a whole new dimension.In the Czech Republic, the limit for an air rifle is in category D (over-the-counter from the age of 18) to 16J. So why not make the most...

View

CARBON NANO DRESSING Tecasorb (first aid)

CARBON NANO DRESSING Tecasorb (first aid) 2

Practical accessories

CARBON NANO DRESSING Tecasorb (first aid)

Tecasorb consists of absorbent covering nano dressings or plasters with a carbon layer, made from active carbon textile. Tecasorb is easy to use and supports faster healing. It is durable and has lasting absorbent properties. In cases of significantly infected wounds, the dressing should be changed every 6-12 hours initially. After improvement, the...

View

Silencer for Walther LG 300/400

Silencer for Walther LG 300/400 2

Tuning

Silencer for Walther LG 300/400

You have a Walther LG 300 or Walther LG 400 air rifle and you don't want to disturb your neighbors with training noise. Then fit a standard front sight that you have on your air rifle with our reduction set. You will get an almost inaudible shot and you can improve your shooting skills at home.The set contains all the necessary components and its assembly...

View

Walther regulator pressure transducer

Walther regulator pressure transducer 2

Tuning

Walther regulator pressure transducer

Do you have a Walther LG 300 or Walther LG 400 air rifle and need to set the correct pressure on the regulator or check if your regulator is working properly?The device we manufacture for precise adjustment and pressure measurement will allow you to do so comfortably and quickly.The pressure transducer is universal for Walther LG 300 and Walther LG 400...

View

Walther LG 300 tension lever pin

Walther LG 300 tension lever pin 2

Tuning

Walther LG 300 tension lever pin

The Walther LG 300 air rifle has a relatively long tension lever, so if you fit it with a riflescope, you will encounter a problem that the original tension lever cannot be pulled. All that remains is to remove and shorten the tension lever. You can then fit it with a duralumin pin made by us. We supply the tensioning pin in silver or black.The set...

View

Duralumin grips for CZ 75 and their clones

Duralumin grips for CZ 75 and their clones 2

Tuning

Duralumin grips for CZ 75 and their clones

High-quality and very precisely processed duralumin butts for CZ self-loading pistols. The grips are intended for all those who want to equip their weapon with something unconventional, exceptional and at the same time perfectly functional. Mounting the grips is very easy, so you're done in a few minutes. The screws are included in the package.

View

Return spring guide CZ 75 SP-01, Shadow, Tactical Sport

Tuning

Return spring guide CZ 75 SP-01, Shadow, Tactical Sport

Very high quality, refined and polished return spring guide. By using this guide you will achieve better weapon behavior. Made of high quality steel.

View

Mounting of the SHIELD SIGHTS SMS/RMS and RMSc COLLIMATOR...

Tuning

Mounting of the SHIELD SIGHTS SMS/RMS and RMSc COLLIMATOR for CZ 75 SP-01 Shadow, CZ...

The high-quality mount for the SHIELD SIGHTS SMS/RMS/RMSc collimator is very easy to replace with the original standard sights. No modifications to the weapon are required and the original sights can be reinstalled at any time. The mounting of the collimator sight is made of refined steel and will serve you 100% for decades.

View

Mounting of SHIELD SIGHTS SMS/RMS and RMSc COLLIMATOR for...

Tuning

Mounting of SHIELD SIGHTS SMS/RMS and RMSc COLLIMATOR for GLOCK

The high-quality mount for the SHIELD SIGHTS SMS/RMS/RMSc collimator is very easy to replace with the original standard sights. No modifications to the weapon are required and the original sights can be reinstalled at any time. The assembly of the collimator sight is made of refined steel and will serve you 100% for decades.

View

Front sight CZ FO 1mm

Tuning

Front sight CZ FO 1mm

The CZ FO front sight with light-conducting fiber 1mm wide 3.3mm with a height of 5.75mm is suitable for a fixed sight for CZ P-07, CZ P-09, CZ P-10 C. It stands out for its highly precise processing and precise geometry. The viewing surface is roughened against unwanted glare.The front sight is suitable for CZ P-07, CZ P-09, CZ P-10 C pistols, where it...

View

Front sight CZ P-10C FO 1.5mm

Tuning

Front sight CZ P-10C FO 1.5mm

The CZ P-10 C front sight with light guide fiber 1.5 mm wide 3.2 mm and 9 mm high is suitable for the adjustable sight of the CZ P-10 C pistol. It stands out for its highly precise processing and precise geometry. The viewing surface is roughened against unwanted glare.The front sight is suitable for CZ P-10 C pistols, where it is fixed in a longitudinal...

View

Front sight CZ P-10C FO 1mm

Tuning

Front sight CZ P-10C FO 1mm

Front sight CZ P-10 C with optical fiber 1 mm wide 3.2 mm with a height of 9 mm is suitable for the adjustable sight of the CZ P-10 C pistol. It stands out for its highly precise processing and precise geometry. The viewing surface is roughened against unwanted glare.The front sight is suitable for CZ P-10 C pistols, where it is fixed in a longitudinal...

View

Fixed GLOCK sights

Tuning

Fixed GLOCK sights

High-quality and very precisely processed sights with precise geometry for GLOCK self-loading pistols. Sights are supplied in a set, i.e. a fixed sight and a light guide front sight. You can choose between 1mm or 1.5mm light-guiding fiber in yellow, orange, red or green.The sight surface of the front sight is roughened against unwanted glare.Made in Czech...

View

Fixed sights GLOCK FO

Tuning

Fixed sights GLOCK FO

High-quality and very precisely processed sights with precise geometry for GLOCK self-loading pistols. The sights are supplied in a set, i.e. a fixed sight with a 1mm light-guiding fiber and a light-guiding front sight. For the fly, you can choose between 1mm or 1.5mm light-guiding fiber in yellow, orange, red or green.The sight surface of the front sight...

View

Adjustable rear sight CZ 75, CZ 85, CZ 97 (without slide...

Tuning

Adjustable rear sight CZ 75, CZ 85, CZ 97 (without slide adjustment)

High-quality and very precisely processed micrometric adjustable sight with precise geometry for CZ 75 self-loading pistols and their clones. The cutout in the visor slice is 3x2.2mm (width x depth). The micro metrically adjustable front sight is supplied without a front sight, which you can order separately, depending on which weapon it will be mounted...

View

Adjustable rear sight CZ 75, CZ 85, CZ 97 FO (without...

Tuning

Adjustable rear sight CZ 75, CZ 85, CZ 97 FO (without slide adjustment)

High-quality and very precisely processed micrometric adjustable sight with precise geometry for CZ 75 self-loading pistols and their clones. The cutout in the visor slice is 3x2.2mm (width x depth). The micro metrically adjustable front sight is supplied without a front sight, which you can order separately, depending on which weapon it will be mounted...

View

Adjustable sight CZ 75 SP-01 Shadow, CZ Shadow 2

Tuning

Adjustable sight CZ 75 SP-01 Shadow, CZ Shadow 2

High-quality and very precisely processed micro metrically adjustable rear sight with precise geometry for the CZ 75 SP Shadow and CZ Shadow 2 self-loading pistols. The cutout in the rear sight plate is 3 x 2.2 mm or 3 x 2.7 mm (width x depth). The micro metrically adjustable front sight is supplied without a front sight, which you can order separately,...

View

Adjustable sight CZ P-10

Tuning

Adjustable sight CZ P-10

High-quality and very precisely processed micrometric adjustable sight with precise geometry for CZ P-10 self-loading pistols. The cutout in the visor slice is 3 x 2.2mm (width x depth). The micro metrically adjustable front sight is supplied without a front sight, which you can order separately, depending on which weapon it will be mounted on. One click...

View

Adjustable sight CZ P-10 FO

Tuning

Adjustable sight CZ P-10 FO

High-quality and very precisely processed micrometric adjustable sight with precise geometry for CZ P-10 self-loading pistols. The cutout in the visor slice is 3 x 2.3mm (width x depth). The micro metrically adjustable front sight is supplied without a front sight, which you can order separately, depending on which weapon it will be mounted on. One click...

View

Adjustable visor FO CZ 75 SP-01 Shadow, CZ Shadow 2

Tuning

Adjustable visor FO CZ 75 SP-01 Shadow, CZ Shadow 2

High-quality and very precisely processed micro metrically adjustable rear sight with precise geometry for self-loading pistols CZ 75 SP-01 Shadow and CZ Shadow 2. Cutout in the rear sight plate is 3 x 2.3 mm (width x depth). The micro metrically adjustable front sight is supplied without a front sight, which you can order separately, depending on which...

View

Adjustable sight Special CZ 75 SP-01 Shadow, CZ Shadow 2

Tuning

Adjustable sight Special CZ 75 SP-01 Shadow, CZ Shadow 2

High-quality and very precisely processed micrometrically adjustable rear sight with precise geometry for the CZ 75 SP-01 Shadow and CZ Shadow 2 self-loading pistols. The cutout in the rear sight plate is 3 x 2.2 mm (width x depth). The micro metrically adjustable front sight is supplied without a front sight, which you can order separately, depending on...

View

Trigger spring CZ 75 - 0.7

Tuning

Trigger spring CZ 75 - 0.7

Trigger spring for CZ 75 used to reduce trigger resistance and increase its accuracy. We recommend using it, for example, when converting a double-action trigger mechanism to a single-action one. This will give you a gentler squeeze of the trigger and, as a result, greater accuracy. The spring is suitable for most CZ 75 type pistols and can also be used...

View

Trigger spring CZ 75 - 0.8

Tuning

Trigger spring CZ 75 - 0.8

Trigger resistance spring for CZ 75 used to reduce trigger resistance and increase its accuracy. We recommend using it, for example, when converting a double-action trigger mechanism to a single-action one. This will give you a gentler squeeze of the trigger and, as a result, greater accuracy. The spring is suitable for most CZ 75 type pistols and can...

View

CZ 75 TS trigger spring - 0.7

Tuning

CZ 75 TS trigger spring - 0.7

Trigger resistance spring for CZ 75 TS used to reduce trigger resistance and increase its accuracy. The kit contains all the necessary components and can be assembled by an average skilled handyman. If you do not dare to mount it, entrust it to your gunsmith.

View

Cock catch spring CZ 75 - 0.7

Tuning

Cock catch spring CZ 75 - 0.7

Cock catch spring for CZ 75 - 0.7 serving to increase trigger resistance. The kit contains all the necessary components and can be assembled by an average skilled handyman. If you do not dare to mount it, entrust it to your gunsmith.

View

Cock catch spring CZ 75 - 0.8

Tuning

Cock catch spring CZ 75 - 0.8

Cock catch spring for CZ 75 - 0.8 serving to increase trigger resistance. The kit contains all the necessary components and can be assembled by an average skilled handyman. If you do not dare to mount it, entrust it to your gunsmith.

View

Cock catch spring CZ 75 - 0.75

Tuning

Cock catch spring CZ 75 - 0.75

Cock catch spring for CZ 75 - 0.75 serving to increase trigger resistance. The kit contains all the necessary components and can be assembled by an average skilled handyman. If you do not dare to mount it, entrust it to your gunsmith.

View

Precise barrel guidance CZ 75 - 16.3/12.8

Tuning

Precise barrel guidance CZ 75 - 16.3/12.8

High-quality and very accurate barrel guide CZ 75 - 16.3 / 12.8 has an optimal shape of the hole for the barrel. This guide perfectly minimizes the play between the guide of the barrel and the barrel. Thanks to this, it significantly reduces the dispersion of the weapon caused by excessive clearance in the barrel of the weapon. Please check the OD of the...

View

Precise barrel guidance CZ 75 - 16.3/14.0

Tuning

Precise barrel guidance CZ 75 - 16.3/14.0

High-quality and very accurate barrel guide CZ 75 - 16.3 / 14.0 has an optimal shape of the hole for the barrel. This guide perfectly minimizes the play between the guide of the barrel and the barrel. Thanks to this, it significantly reduces the dispersion of the weapon caused by excessive clearance in the barrel of the weapon. Please check the OD of the...

View

Precise barrel guidance CZ 75 - 17.3/14.0

Tuning

Precise barrel guidance CZ 75 - 17.3/14.0

High-quality and very accurate barrel guide CZ 75 - 17.3 / 14.0 has an optimal shape of the hole for the barrel. This guide perfectly minimizes the play between the guide of the barrel and the barrel. Thanks to this, it significantly reduces the dispersion of the weapon caused by excessive clearance in the barrel of the weapon. Please check the OD of the...

View

Weaker return spring CZ 75 - 9 LBS

Tuning

Weaker return spring CZ 75 - 9 LBS

Weaker shutter return spring for CZ 75. By using this spring, you will achieve a better behavior of the weapon during the shot and easier handling of the shutter. Spring force is 9 LBS.

View

Weaker return spring CZ 75 - 10 LBS

Tuning

Weaker return spring CZ 75 - 10 LBS

Weaker shutter return spring for CZ 75. By using this spring, you will achieve a better behavior of the weapon during the shot and easier handling of the shutter. Spring force is 10 LBS.

View

Weaker return spring CZ 75 - 11 LBS

Tuning

Weaker return spring CZ 75 - 11 LBS

Weaker shutter return spring for CZ 75. By using this spring, you will achieve a better behavior of the weapon during the shot and easier handling of the shutter. Spring force is 11 LBS.

View

Weaker Hammer spring CZ 75 - 63mm

Tuning

Weaker Hammer spring CZ 75 - 63mm

Weaker Hammer Spring for CZ 75 By using this spring, you will achieve a lower trigger resistance, especially in DA (Double Action) shooting mode. Simultaneously, with this weaker hammer spring, you can also use a weaker firing pin spring. This will prevent potential misfires.

View

Waterproof Notebook JASE

Waterproof Notebook JASE 2

Practical accessories

Waterproof Notebook JASE

Pocket-sized waterproof notebook in green design. This notebook features a spiral binding that ensures maximum clarity of your notes. Its dark green cover is ideal for natural environments where white paper could reveal your position. The notebook contains 48 sheets of anti-reflective, waterproof green all-weather paper with horizontal lines. Thanks to...

View

Weaker Hammer spring CZ 75 - 68mm

Tuning

Weaker Hammer spring CZ 75 - 68mm

Weaker Hammer Spring for CZ 75 By using this spring, you will achieve a lower trigger resistance, especially in DA (Double Action) shooting mode. Simultaneously, with this weaker hammer spring, you can also use a weaker firing pin spring. This will prevent potential misfires.

View

Alignment Adapter for SA 58 (vz.58)

Alignment Adapter for SA 58 (vz.58) 2

Submachine gun SA 58 (vz 58, 585 etc.)

Alignment Adapter for SA 58 (vz.58)

The vz. 58 submachine gun was an excellent weapon for its time, and due to its design qualities, it is still in use by armed forces today. As for its popularity among civilian shooters, there's no need to elaborate extensively—nearly everyone knows it. Given its year of origin, the biggest design drawbacks of this weapon are the inability to mount optics...

View

Weight 170g with MLOK Mounting System

Weight 170g with MLOK Mounting System 2

Tuning

Weight 170g with MLOK Mounting System

This 170g weight is designed for attachment to any stock equipped with the MLOK mounting system (e.g., MDT stock). Available in various colors, there's an option for everyone.

View

Weight 280g with MLOK Mounting System

Weight 280g with MLOK Mounting System 2

Tuning

Weight 280g with MLOK Mounting System

This 280g weight is designed for attachment to any stock equipped with the MLOK mounting system (e.g., MDT stock). Available in various colors, there's an option for everyone.

View

High-Quality Oil Not Only for Firearms: Interflon Fin Super Dry Lube

High-Quality Oil Not Only for Firearms: Interflon Fin Super Dry Lube 2

Weapon accessories

High-Quality Oil Not Only for Firearms: Interflon Fin Super Dry Lube

Multi-purpose oil not only for firearms, which cleans, lubricates, preserves, and protects against oxidation.Lubricating oil with MicPol® sliding particles that provides high penetration for long-lasting lubrication. This is a high-quality multi-purpose oil for firearms, ammunition, and equipment that cleans, lubricates, preserves, and protects against...

View

ARCA Swiss rail for UIT

ARCA Swiss rail for UIT 2

New

Weapon accessories

ARCA Swiss rail for UIT

The ARCA Swiss rail is a great addition to any rifle that has a chassis with an UIT clamping system. It can be used wherever the weapon uses a forend (chassis) with an UIT clamping system. A typical example is the weapons used for PRS shooting disciplines.This will give you a big advantage! You can easily move bipods or other accessories efficiently from...

View

Product added to wishlist

Product added to compare.