Best sellers

Showing 1-24 of 144 item(s)

CZ 457 trigger resistance springs

Tuning

CZ 457 trigger resistance springs

A set of springs used to reduce the resistance of the CZ 457 trigger and increase its accuracy.The set includes two springs, with the trigger spring reducing the factory resistance of the trigger by -50% and the impact spring, which has a 10% higher resistance. Using the trigger spring, you can reduce the trigger resistance to 0.5 kg.A stronger impact...

View

Filler for shooting BAG

Filler for shooting BAG 2

Shooting bags, case, pads and accessories

Filler for shooting BAG

Quality and favourite filling material DELTA to shooting bags of all types and sizes. Material is made from plastic, has lenticular form, doesn´t change itś volume, is waterproof and has optimal weight. It is very universal and favourite material, that we use for filling all of our bags and we can reccomend it.

View

Adapter UIT to WEAVER (UIT - WEAVER)

Adapter UIT to WEAVER (UIT - WEAVER) 2

Weapon accessories

Adapter UIT to WEAVER (UIT - WEAVER)

Universal adapter from UIT to WEAVER (picatinny rail). The adapter is made of high-quality material that fits the highest requirements. You can mount the system in seconds. We manufacture the adapter in lengths of 55mm (2.16in), 100mm (3.93in), and 200mm (7.87in). Perfect workmanship. Made in Czech Republic.

View

Trigger resistance springs for CZ 455 / ZKM 452

Tuning

Trigger resistance springs for CZ 455 / ZKM 452

A set of springs used to reduce the resistance of the CZ 455 trigger from the factory 1.3 kg to 0.3 kg, according to your preferences. The strength of the trigger resistance is affected by more factors than just the force of the springs. Therefore, take the achievable resistance as a guide, it can vary by a few percent. The adjusting nuts on the spring...

View

Trigger resistance spring TIKKA T3, T3x and T1x

Tuning

Trigger resistance spring TIKKA T3, T3x and T1x

Spring used to reduce the resistance of the trigger for TIKKA T3, T3x, T1x and increase its accuracy.Using the trigger spring, you can reduce the resistance of the trigger up to 0.5 kg. When the lowest trigger resistance is set, firing may occur when the weapon is unlocked! This fact must be taken into account! For the above reasons, we do not recommend...

View

Replacement screws with UIT plate for rail.

Replacement screws with UIT plate for rail. 2

Weapon accessories

Replacement screws with UIT plate for rail

Replacement screws with UIT plate for installation on UIT rail. The inserts are made of high quality duralumin and the M4 (4mm) countersunk head screws have hardness according to DIN 7991-10,9. Perfect workmanship. Made in Czech Republic.

View

Medium Shooting BAG

Medium Shooting BAG 2

Shooting bags, case, pads and accessories

Medium Shooting BAG

Optimal tool to stabilise shooting and safe insertion of a weapon.Practical shooting bags for accurate shooting at extremely long-range are produced in a small series with a focus on 100% quality production and material.Made in the EU.

View

ARCA Swiss rail for M-LOK

ARCA Swiss rail for M-LOK 2

Weapon accessories

ARCA Swiss rail for M-LOK

The ARCA Swiss rail is a great addition to any rifle that has a chassis with an M-LOK clamping system. It can be used wherever the weapon uses a forend (chassis) with an M-LOK clamping system. A typical example is the weapons used for PRS shooting disciplines.This will give you a big advantage! You can easily move bipods or other accessories efficiently...

View

Ballistic chronograph Air Chrony MK3 (black)

Ballistic chronograph Air Chrony MK3 (black) 2

Shooting chronographs

Ballistic chronograph Air Chrony MK3 (black)

Ballistic chronograph Air Chrony MK3 is a modern tool intended for measuring the velocity and kinetic energy of a bullet with a high accuracy and reliability. Air Chrony MK3 provides an excellent measurement accuracy, high resistance to interferences, possibility to measure under bad lighting conditions, selectable languages menu and other modern...

View

Trigger resistance springs for CZ SCORPION EVO

Tuning

Trigger resistance springs for CZ SCORPION EVO

A set of springs used to reduce the resistance of the trigger from the factory 5kg to 2.5kg. The CZ SCORPION EVO 3 weapon is designed from the ground up as a service weapon, and for this reason the resistance of the trigger and its characteristics are designed to maintain shooting safety even in crisis situations and shooting in gloves. During the...

View

Adjustable RECOIL PAD (universal)

Adjustable RECOIL PAD (universal) 2

Weapon accessories

Adjustable RECOIL PAD (universal)

The universal adjustable recoil pad mechanism is designed for all types of stocks. The adjustable mechanism of the recoil pad was developed with regard to the needs of shooters to easily and quickly change its settings.It is possible to use practically any rubber recoil pad that suits you on our height and length adjustable mechanics, or you can buy ATI...

View

Bubble level 30mm LIBELA

Bubble level 30mm LIBELA 2

Weapon accessories

Bubble level 30mm

The quality 30mm spirit level has been tested by our competitive shooters. Its construction is designed to withstand the high-powered weapons you may encounter in hunting and sniper rifles. The mounting system is made of anodized aircraft grade aluminum 6065T.It is a quality spirit level for reasonable money!

View

Camouflage hat ATOMAN

Camouflage hat ATOMAN 2

Tactical clothing and equipment

Camouflage hat ATOMAN

Camouflage hats ATOMAN are developed for quick, efficient and easy camouflage and breakage of the shoulders silhouette. The whole hat is well aired, so it provides maximum comfort even at high temperatures and together with low weight is optimal for the most of operations, where is necessary not to be seen. A characteristic feature of the camouflage hat...

View

External WEAVER for mirage band

External WEAVER for mirage band 2

Weapon accessories

External WEAVER for mirage band

External WEAVER handle of lenta (mirage band - heat screen) for situations, when a rifle isn´t equipped with the handle in standard. Our handle is ready for installation on the weaver rail and it is suitable for any regular lenta (mirage band). Handle of lenta is easilly installed on weaver rail (approx. 10 sec.), light and made of quality aerial...

View

Trigger guard CZ 457 (tactical)

Trigger guard CZ 457 (tactical) 2

Tuning

Trigger guard CZ 457 (tactical)

The new tactical trigger guard for small-bore rifle CZ 457 can be now purchased as a supplement to your small-bore rifle. Trigger guard is made of quality duralumin and it is possible to order it in five colour design (black, blue, red, khaki and gold). Colour design is solved by Cerakote spraying and the trigger guard itself is designed to best suit new...

View

Tactical cap KONTRAKTOR

Tactical cap KONTRAKTOR 2

Tactical clothing and equipment

Tactical cap KONTRAKTOR

Cap KONTRAKTOR is made of high quality fabric and designed in a modern style. The cap fits very well on the head and its size can be adjusted using the Velcro at the back. To attach identity identifiers (national flags, unit emblem), personal identifiers (name, blood type) or infrared tags, the front, top and back are equipped with Velcro.The tactical cap...

View

Muzzle brake F1 PRO (blackening)

Muzzle brake F1 PRO (blackening) 2

Muzzle brake and compensator

Muzzle brake F1 PRO (blackening)

The F1 PRO muzzle brake is a highly effective five-chamber brake with an exhaust channel that prevents the weapon from bouncing sideways. Its chambers are designed to not only extremely dampen the recoil and lateral rebound of the weapon, but also prevent its vertical rebound.Test shooters described its effect: "It's like pulling a shotgun to the ground...

View

Fast Ammo 3 pin

Fast Ammo 3 pin 2

Weapon accessories

Fast Ammo 3 pin

Fast Ammo 3 is your easy way to refill capacity and also to quickly reload your weapon. The tactical accessory is easy to install via the Velcro fastener, which is included in the delivery and can also be ordered separately. The Fast Ammo 3 is designed for 3 extra ammo (from .223 through .308 to .338 calibre)

View

Mirage band elastic (thermal shield)

Mirage band elastic (thermal shield) 2

Weapon accessories

Mirage band elastic (thermal shield)

The (Lenta) mirage band is designed for all types of rifles and is made from a highly durable and elastic material designed to divert heat from the barrel to prevent negative thermal effects from the mirage. The mirage is a thermal phenomenon that causes optical illusion. The Lenta (mirage band - thermal shield) helps to eliminate this.

View

Trigger resistance spring CZ 557, 550 and 527

Tuning

Trigger resistance spring CZ 557, 550 and 527

Spring used to reduce the resistance of the trigger CZ 557, CZ 550, CZ 527 and increase its accuracy.Using the trigger spring, you can reduce the resistance of the trigger up to 0.5 kg.When the lowest trigger resistance is set, firing may occur when the weapon is unlocked! This fact must be taken into account! For the above reasons, we do not recommend...

View

Ballistic chronograph Air Chrony MK3 SET (black)

Ballistic chronograph Air Chrony MK3 SET (black) 2

Shooting chronographs

Ballistic chronograph Air Chrony MK3 SET (black)

In this set you can get Air Chrony MK3 together with recommended accessories for a significant discount. Ballistic chronograph Air Chrony MK3 is a modern tool intended for measuring the velocity and kinetic energy of a bullet with a high accuracy and reliability. Air Chrony MK3 provides an excellent measurement accuracy, high resistance to interferences,...

View

Vegetation attachment system

Vegetation attachment system 2

Tactical clothing and equipment

Vegetation attachment system

Rubber with a plastic clip for additional attachment of vegetation is an easy, fast and proven way to attach vegetation or any other small object to clothing. It is a proven and long-term used tool. This tool works very comfortably and quickly in any situation. The total length of the rubber is 21 cm, diameter 4 mm and is available in green (khaki).

View

Camouflage hooded vest

Camouflage hooded vest 2

Tactical clothing and equipment

Camouflage hooded vest

The camouflage hooded vest is designed to perfectly mask the head of a shooter, sniper, observer or hunter. The camouflage vest extends the outline of the camouflaged person´s head, neck and shoulders, which will make him significantly less visible in the background (cover or other vegetation). The basis of the camouflage vest is camouflage fabric...

View

Bipod F-Class F1 3,5-8" (WEAVER)

Bipod F-Class F1 3,5-8" (WEAVER) 2

Bipods

Bipod F-Class F1 3,5-8" (WEAVER)

The high-quality and extremely accurate workshop-processed bipod F-Class F1 (WEAVER) is the best choice for every long range shooter.Bipod F-Class F1 is made of high-quality air duralumin and the overall product processing is at very high level. Individual parts are milled on modern CNC machines, ensuring maximum accuracy and production quality. The...

View

1
2
3
…
6

Product added to wishlist

Product added to compare.