TACTICAL EVO - Hlavní strana

Showing 81-120 of 168 item(s)

Shooting pad

Shooting pad 2

Weapon accessories

Shooting pad

Original shooting pad made from highly durable materials. Indispensable equipment not only for outdoor shooters. The bottom layer is rubberised, a plastic foam filling, a top layer of Cordura. The front part has a practical folding window with a transparent foil for the placement of ballistic tables and other aids. Quality pad for greater comfort in...

View

Puškohled 8

Puškohled 8 2

Optics

Puškohled 8

View

Trigger resistance springs CZ P-10

Tuning

Trigger resistance springs CZ P-10

The set of springs is used to reduce the resistance of the trigger of the CZ P-10 pistol. Our set of springs is fully compatible with variants of pistols S, C, SC, F and contains two versions of the impact spring.One reduces the resistance of the trigger by 0.25 kg, the other by 0.5 kg, so it only depends on you which variant you choose.The springs are...

View

Outdoor tactical pad EXTREME

Outdoor tactical pad EXTREME 2

Weapon accessories

Outdoor tactical pad EXTREME

The EXTREME outdoor tactical pad has been manufactured continuously since 2014, is made of highly durable materials and has been tested by dozens of tourists, sport shooters and soldiers.The bottom layer is rubberised to protect against moisture in the wet or snow. The inner layer is made of plastic foam for comfort when lying on a rocky surface. The top...

View

Bubble level 25,4mm (1") LIBELA

Bubble level 25,4mm (1") LIBELA 2

Weapon accessories

Bubble level 25,4mm (1")

The quality 25.4mm (1") spirit level has been tested by our competitive shooters. Its construction is designed to withstand the high-powered weapons you may encounter in hunting and sniper rifles. The mounting system is made of anodized aircraft grade aluminum 6065T.It is a quality spirit level for reasonable money!

View

SAKO 75, 85, 595 and 695 trigger resistance spring

Tuning

SAKO 75, 85, 595 and 695 trigger resistance spring

Spring used to reduce the resistance of the trigger SAKO 75, 85 595, 695 and increase its accuracy.Using the trigger spring, you can reduce the resistance of the trigger up to 0.5 kg.When the lowest trigger resistance is set, firing may occur when the weapon is unlocked! This fact must be taken into account! For the above reasons, we do not recommend...

View

Bubble level 30mm LIBELA

Bubble level 30mm LIBELA 2

Weapon accessories

Bubble level 30mm

The quality 30mm spirit level has been tested by our competitive shooters. Its construction is designed to withstand the high-powered weapons you may encounter in hunting and sniper rifles. The mounting system is made of anodized aircraft grade aluminum 6065T.It is a quality spirit level for reasonable money!

View

Trigger resistance springs for CZ SCORPION EVO

Tuning

Trigger resistance springs for CZ SCORPION EVO

A set of springs used to reduce the resistance of the trigger from the factory 5kg to 2.5kg. The CZ SCORPION EVO 3 weapon is designed from the ground up as a service weapon, and for this reason the resistance of the trigger and its characteristics are designed to maintain shooting safety even in crisis situations and shooting in gloves. During the...

View

Buttstock cover (genuine leather)

Buttstock cover (genuine leather) 2

Weapon accessories

Buttstock cover (genuine leather)

Additional cheekpiece for the stock. The cheekpiece is very well made, it is sewn from genuine leather and it can be easily and quickly attached to any classic stock. Attachment to the stock is done with Velcro. Variability is ensured by several foam pads, thanks to which you can easily achieve an additional increase of the cheek by approximately 20 mm...

View

Browning X-BOLT trigger resistance spring

Tuning

Browning X-BOLT trigger resistance spring

Spring used to reduce the resistance of the trigger Browning X-BOLT and increase its accuracy.Using the trigger spring, you can reduce the resistance of the trigger up to 0.5 kg.When the lowest trigger resistance is set, firing may occur when the weapon is unlocked! This fact must be taken into account! For the above reasons, we do not recommend setting...

View

Mounting two-piece 25.4mm (1 ") on 11mm rail - LOW

Mounting two-piece 25.4mm (1 ") on 11mm rail - LOW 2

Weapon accessories

Mounting two-piece 25.4mm (1 ") on 11mm rail - LOW

Two-piece LOW duralumin mounting is designed for riflescopes with a smaller objective, usually up to 40 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 25.4 mm (1 ") tube. The mounting is designed for an 11 mm rail.

View

Walther LG 300 / LG 400

Walther LG 300 / LG 400 2

Tuning

Walther steel cartridge plug

Spare part for WALTHER steel cartridges.Long-term use of some Walther steel cartridges wears out the thread on the cartridge. This is manifested mainly by the fact that there is a layer of small brass sawdust in the area of the pressure regulator.Over time, the thread on the cartridge becomes so worn that the thread does not withstand the air pressure...

View

T-shirt Tactical EVO (black and khaki green)

T-shirt Tactical EVO (black and khaki green) 2

Tactical clothing and equipment

T-shirt Tactical EVO (black and khaki green)

Very high quality and durable Tactical EVO t-shirt in sizes XS, S, M, L, XL and two possible colors (black, dark green). The T-shirt is made of high-quality materials that do not irritate the skin and are very pleasant to touch and wear.Thanks to the structure of the knitting and the special shape of the fiber, it wicks away sweat perfectly, which in...

View

Two-piece mounting 30mm on 11mm rail - LOW

Two-piece mounting 30mm on 11mm rail - LOW 2

Weapon accessories

Two-piece mounting 30mm on 11mm rail - LOW

Two-piece LOW duralumin mounting is designed for riflescopes with a smaller objective, usually up to 40 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 30mm tube. The mounting is designed for 11mm rail.

View

Filling PIN for WALTHER air rifles (universal)

Filling PIN for WALTHER air rifles (universal) 2

Tuning

Filling PIN for WALTHER air rifles (universal)

Universal filling PIN (valve) for WALTHER air rifles and pistols. The filling pin is designed for both types of cylinders, so it can be mounted on both 200 and 300 bar pressure bottles (bombs).

View

T-shirt Tactical EVO (black and sand)

T-shirt Tactical EVO (black and sand) 2

Tactical clothing and equipment

T-shirt Tactical EVO (black and sand)

Tactical EVO T-shirt in sizes S, M, L, XL and two possible colors (black, sand). The T-shirt is made of quality materials that do not irritate the skin and is very pleasant to the touch and wear.The T-shirt is universal for both women and men and will also serve as a gift 100%.

View

Enlargement of the Walther LG 300 pressure regulator chamber

Enlargement of the Walther LG 300 pressure regulator chamber 2

Tuning

Enlargement of the Walther LG 300 pressure regulator chamber

Ring for enlarging the chamber of the pressure regulator for the Walther LG 300 air rifle.The chamber of the standard pressure regulator of the PCP air rifle Walther LG 300 is designed for shooting with a power of 7.5J. With our rings, you can easily achieve an enlargement of the chamber and thus the possibility to set the power of the Walther LG 300 air...

View

Vegetation attachment system

Vegetation attachment system 2

Tactical clothing and equipment

Vegetation attachment system

Rubber with a plastic clip for additional attachment of vegetation is an easy, fast and proven way to attach vegetation or any other small object to clothing. It is a proven and long-term used tool. This tool works very comfortably and quickly in any situation. The total length of the rubber is 21 cm, diameter 4 mm and is available in green (khaki).

View

CARBON PLASTER Tecasorb (first aid)

CARBON PLASTER Tecasorb (first aid) 2

Practical accessories

CARBON PLASTER Tecasorb (first aid)

Tecasorb are absorbent covering nano dressings or plasters with a carbon layer, made from active carbon textile. Tecasorb is easy to use and supports faster healing. It is durable and has lasting absorbent properties. For significantly infected wounds, the dressing should be changed every 6-12 hours at the beginning. After improvement, the optimal...

View

Reduction for Walther LG 400

Reduction for Walther LG 400 2

Tuning

Reduction for Walther LG 400

By replacing the pressure regulator from the LG 400 with a pressure regulator from the LG 300, you will get much greater setting options and the excellent Walther LG 400 air rifle will thus enter a whole new dimension.In the Czech Republic, the limit for an air rifle is in category D (over-the-counter from the age of 18) to 16J. So why not make the most...

View

CARBON NANO DRESSING Tecasorb (first aid)

CARBON NANO DRESSING Tecasorb (first aid) 2

Practical accessories

CARBON NANO DRESSING Tecasorb (first aid)

Tecasorb consists of absorbent covering nano dressings or plasters with a carbon layer, made from active carbon textile. Tecasorb is easy to use and supports faster healing. It is durable and has lasting absorbent properties. In cases of significantly infected wounds, the dressing should be changed every 6-12 hours initially. After improvement, the...

View

Silencer for Walther LG 300/400

Silencer for Walther LG 300/400 2

Tuning

Silencer for Walther LG 300/400

You have a Walther LG 300 or Walther LG 400 air rifle and you don't want to disturb your neighbors with training noise. Then fit a standard front sight that you have on your air rifle with our reduction set. You will get an almost inaudible shot and you can improve your shooting skills at home.The set contains all the necessary components and its assembly...

View

Walther regulator pressure transducer

Walther regulator pressure transducer 2

Tuning

Walther regulator pressure transducer

Do you have a Walther LG 300 or Walther LG 400 air rifle and need to set the correct pressure on the regulator or check if your regulator is working properly?The device we manufacture for precise adjustment and pressure measurement will allow you to do so comfortably and quickly.The pressure transducer is universal for Walther LG 300 and Walther LG 400...

View

Walther LG 300 tension lever pin

Walther LG 300 tension lever pin 2

Tuning

Walther LG 300 tension lever pin

The Walther LG 300 air rifle has a relatively long tension lever, so if you fit it with a riflescope, you will encounter a problem that the original tension lever cannot be pulled. All that remains is to remove and shorten the tension lever. You can then fit it with a duralumin pin made by us. We supply the tensioning pin in silver or black.The set...

View

Duralumin grips for CZ 75 and their clones

Duralumin grips for CZ 75 and their clones 2

Tuning

Duralumin grips for CZ 75 and their clones

High-quality and very precisely processed duralumin butts for CZ self-loading pistols. The grips are intended for all those who want to equip their weapon with something unconventional, exceptional and at the same time perfectly functional. Mounting the grips is very easy, so you're done in a few minutes. The screws are included in the package.

View

Return spring guide CZ 75 SP-01, Shadow, Tactical Sport

Tuning

Return spring guide CZ 75 SP-01, Shadow, Tactical Sport

Very high quality, refined and polished return spring guide. By using this guide you will achieve better weapon behavior. Made of high quality steel.

View

Mounting of the SHIELD SIGHTS SMS/RMS and RMSc COLLIMATOR...

Tuning

Mounting of the SHIELD SIGHTS SMS/RMS and RMSc COLLIMATOR for CZ 75 SP-01 Shadow, CZ...

The high-quality mount for the SHIELD SIGHTS SMS/RMS/RMSc collimator is very easy to replace with the original standard sights. No modifications to the weapon are required and the original sights can be reinstalled at any time. The mounting of the collimator sight is made of refined steel and will serve you 100% for decades.

View

Mounting of SHIELD SIGHTS SMS/RMS and RMSc COLLIMATOR for...

Tuning

Mounting of SHIELD SIGHTS SMS/RMS and RMSc COLLIMATOR for GLOCK

The high-quality mount for the SHIELD SIGHTS SMS/RMS/RMSc collimator is very easy to replace with the original standard sights. No modifications to the weapon are required and the original sights can be reinstalled at any time. The assembly of the collimator sight is made of refined steel and will serve you 100% for decades.

View

Front sight CZ FO 1mm

Tuning

Front sight CZ FO 1mm

The CZ FO front sight with light-conducting fiber 1mm wide 3.3mm with a height of 5.75mm is suitable for a fixed sight for CZ P-07, CZ P-09, CZ P-10 C. It stands out for its highly precise processing and precise geometry. The viewing surface is roughened against unwanted glare.The front sight is suitable for CZ P-07, CZ P-09, CZ P-10 C pistols, where it...

View

Front sight CZ P-10C FO 1.5mm

Tuning

Front sight CZ P-10C FO 1.5mm

The CZ P-10 C front sight with light guide fiber 1.5 mm wide 3.2 mm and 9 mm high is suitable for the adjustable sight of the CZ P-10 C pistol. It stands out for its highly precise processing and precise geometry. The viewing surface is roughened against unwanted glare.The front sight is suitable for CZ P-10 C pistols, where it is fixed in a longitudinal...

View

Front sight CZ P-10C FO 1mm

Tuning

Front sight CZ P-10C FO 1mm

Front sight CZ P-10 C with optical fiber 1 mm wide 3.2 mm with a height of 9 mm is suitable for the adjustable sight of the CZ P-10 C pistol. It stands out for its highly precise processing and precise geometry. The viewing surface is roughened against unwanted glare.The front sight is suitable for CZ P-10 C pistols, where it is fixed in a longitudinal...

View

Fixed GLOCK sights

Tuning

Fixed GLOCK sights

High-quality and very precisely processed sights with precise geometry for GLOCK self-loading pistols. Sights are supplied in a set, i.e. a fixed sight and a light guide front sight. You can choose between 1mm or 1.5mm light-guiding fiber in yellow, orange, red or green.The sight surface of the front sight is roughened against unwanted glare.Made in Czech...

View

Rifle Tunnel + front sight included

Rifle Tunnel + front sight included 2

Optics

Rifle Tunnel PROF + front sight included

This is a universal rifle tunnel for all known brands of weapons. The rifle tunnel is made of solid material (high quality alloy AW 6082 T6) on CNC machines, the surface is sanded and black anodized.Perfect workmanship. Made in Czech Republic.

View

Fixed sights GLOCK FO

Tuning

Fixed sights GLOCK FO

High-quality and very precisely processed sights with precise geometry for GLOCK self-loading pistols. The sights are supplied in a set, i.e. a fixed sight with a 1mm light-guiding fiber and a light-guiding front sight. For the fly, you can choose between 1mm or 1.5mm light-guiding fiber in yellow, orange, red or green.The sight surface of the front sight...

View

Rifle tunnel carrier with flap

Rifle tunnel carrier with flap 2

Optics

Rifle tunnel carrier with flap

Rifle tunnel carrier with flap for biathlon shooters. Easily and universally implementable carrier is designed for biathlon rifles with a main diameter of 22 mm. The carrier and the carrier flap are made of solid material (high quality dural AW 6082 T6) on CNC machines and the surface treatment is solved with black anodizing.Perfect workshop processing....

View

Ballistic chronograph Air Chrony MK3 (black)

Ballistic chronograph Air Chrony MK3 (black) 2

Shooting chronographs

Ballistic chronograph Air Chrony MK3 (black)

Ballistic chronograph Air Chrony MK3 is a modern tool intended for measuring the velocity and kinetic energy of a bullet with a high accuracy and reliability. Air Chrony MK3 provides an excellent measurement accuracy, high resistance to interferences, possibility to measure under bad lighting conditions, selectable languages menu and other modern...

View

Adjustable rear sight CZ 75, CZ 85, CZ 97 (without slide...

Tuning

Adjustable rear sight CZ 75, CZ 85, CZ 97 (without slide adjustment)

High-quality and very precisely processed micrometric adjustable sight with precise geometry for CZ 75 self-loading pistols and their clones. The cutout in the visor slice is 3x2.2mm (width x depth). The micro metrically adjustable front sight is supplied without a front sight, which you can order separately, depending on which weapon it will be mounted...

View

Adjustable rear sight CZ 75, CZ 85, CZ 97 FO (without...

Tuning

Adjustable rear sight CZ 75, CZ 85, CZ 97 FO (without slide adjustment)

High-quality and very precisely processed micrometric adjustable sight with precise geometry for CZ 75 self-loading pistols and their clones. The cutout in the visor slice is 3x2.2mm (width x depth). The micro metrically adjustable front sight is supplied without a front sight, which you can order separately, depending on which weapon it will be mounted...

View

Ballistic chronograph Air Chrony MK3 SET (black)

Ballistic chronograph Air Chrony MK3 SET (black) 2

Shooting chronographs

Ballistic chronograph Air Chrony MK3 SET (black)

In this set you can get Air Chrony MK3 together with recommended accessories for a significant discount. Ballistic chronograph Air Chrony MK3 is a modern tool intended for measuring the velocity and kinetic energy of a bullet with a high accuracy and reliability. Air Chrony MK3 provides an excellent measurement accuracy, high resistance to interferences,...

View

Adjustable sight CZ 75 SP-01 Shadow, CZ Shadow 2

Tuning

Adjustable sight CZ 75 SP-01 Shadow, CZ Shadow 2

High-quality and very precisely processed micro metrically adjustable rear sight with precise geometry for the CZ 75 SP Shadow and CZ Shadow 2 self-loading pistols. The cutout in the rear sight plate is 3 x 2.2 mm or 3 x 2.7 mm (width x depth). The micro metrically adjustable front sight is supplied without a front sight, which you can order separately,...

View

1
2
3
4
5

Product added to wishlist

Product added to compare.