TACTICAL EVO - Hlavní strana

Příslušenství pro zbraně, outdoor, lov a střelbu

Showing 1-40 of 44 item(s)

Rangefinder NK 600m

Rangefinder NK 600m 2

Rangefinders

Rangefinder NK 600m

A quality rangefinder is one of the basic prerequisites for a successful target hit. We are coming to the market with a new range of highly accurate and affordable rangefinders for virtually everyone.It is a rangefinder with the best price, quality and performance ratio. The rangefinder has a very good image, quality workmanship and good mechanical...

View

Weaver mounting on SA 58 (vz.58) with stock in IN-LINE...

Weaver mounting on SA 58 (vz.58) with stock in IN-LINE... 2

Submachine gun SA 58 (vz 58, 585 etc.)

Weaver mounting on SA 58 (vz.58) with stock in IN-LINE design

Weaver mounting on SA submachine gun vz. 58 is currently a necessary accessory for every shooter who is really serious about shooting from this iconic Czechoslovak self-loading assault rifle. Submachine gun vz. 58 was a great weapon for its time and for its design qualities it serves in the armed forces to this day. As for its popularity among civilian...

View

Rangefinder TE 2000m

Rangefinder TE 2000m 2

Rangefinders

Rangefinder TE 2000m

The TE 2000 rangefinder is one of the most powerful range finders on the market with a significant price, quality and performance ratio. The rangefinder has a very high-quality image, excellent workmanship and good mechanical resistance. Thanks to its construction, it is dustproof and waterproof at the same time. The rangefinder is easy to operate with...

View

IN-LINE Buttstock reduction for SA vz.58

IN-LINE Buttstock reduction for SA vz.58 2

Submachine gun SA 58 (vz 58, 585 etc.)

IN-LINE Buttstock reduction for SA vz.58

Weaver mounting buttstock reduction system for SA vz. 58 and its clones. This reduction is designed specifically to use with our product: Weaver mount for SA vz. 58 and will allow you to quickly change the lock system of your buttstock. Available variants are mounting locks for FAB Defense, AR-style buffer, Zhukov Yugo style, or the original wooden and...

View

Muzzle brake with high efficiency M18x1

Muzzle brake with high efficiency M18x1 2

Muzzle brake and compensator

Muzzle brake SAR2 (CERAKOTE)

The muzzle brake is a device that eliminates the negative effects of forces acting on the shooter and the weapon after the shot. It changes the direction of the flow of gases escaping during the shot from the barrel and thus compensates for the recoil and dampens the impact of the shot. Our SAR2 muzzle brake not only compensates for recoil and shot, but...

View

Alignment Adapter for SA 58 (vz.58)

Alignment Adapter for SA 58 (vz.58) 2

Submachine gun SA 58 (vz 58, 585 etc.)

Alignment Adapter for SA 58 (vz.58)

The vz. 58 submachine gun was an excellent weapon for its time, and due to its design qualities, it is still in use by armed forces today. As for its popularity among civilian shooters, there's no need to elaborate extensively—nearly everyone knows it. Given its year of origin, the biggest design drawbacks of this weapon are the inability to mount optics...

View

Muzzle brake 5/8x24UNF

Muzzle brake 5/8x24UNF 2

Muzzle brake and compensator

Muzzle brake SAR2 (blackening)

The muzzle brake is a device that eliminates the negative effects of forces acting on the shooter and the weapon after the shot. It changes the direction of the flow of gases escaping during the shot from the barrel and thus compensates for the recoil and dampens the impact of the shot. Our SAR2 muzzle brake not only compensates for recoil and shot, but...

View

ARCA Swiss rail for UIT

ARCA Swiss rail for UIT 2

Weapon accessories

ARCA Swiss rail for UIT

The ARCA Swiss rail is a great addition to any rifle that has a chassis with an UIT clamping system. It can be used wherever the weapon uses a forend (chassis) with an UIT clamping system. A typical example is the weapons used for PRS shooting disciplines.This will give you a big advantage! You can easily move bipods or other accessories efficiently from...

View

ARCA Swiss rail for M-LOK

ARCA Swiss rail for M-LOK 2

Weapon accessories

ARCA Swiss rail for M-LOK

The ARCA Swiss rail is a great addition to any rifle that has a chassis with an M-LOK clamping system. It can be used wherever the weapon uses a forend (chassis) with an M-LOK clamping system. A typical example is the weapons used for PRS shooting disciplines.This will give you a big advantage! You can easily move bipods or other accessories efficiently...

View

Muzzle brake F1 PRO (color CERAKOTE)

Muzzle brake F1 PRO (color CERAKOTE) 2

Muzzle brake and compensator

Muzzle brake F1 PRO (color CERAKOTE)

The F1 PRO muzzle brake is a highly effective five-chamber brake with an exhaust channel that prevents the weapon from bouncing sideways. Its chambers are designed to not only extremely dampen the recoil and lateral rebound of the weapon, but also prevent its vertical rebound.Test shooters described its effect: "It's like pulling a shotgun to the ground...

View

Adapter UIT to WEAVER (UIT - WEAVER)

Adapter UIT to WEAVER (UIT - WEAVER) 2

Weapon accessories

Adapter UIT to WEAVER (UIT - WEAVER)

Universal adapter from UIT to WEAVER (picatinny rail). The adapter is made of high-quality material that fits the highest requirements. You can mount the system in seconds. We manufacture the adapter in lengths of 55mm (2.16in), 100mm (3.93in), and 200mm (7.87in). Perfect workmanship. Made in Czech Republic.

View

WEAVER rail for Sig Sauer SSG 300

WEAVER rail for Sig Sauer SSG 300 2

Tuning

WEAVER rail (picatinny) for Sig Sauer SSG 3000

Precisely made WEAVER rail (set) designed to attach to the stock of the Sig Sauer SSG 3000 rifle.Sig Sauer SSG 3000 is a great weapon designed for accurate shooting at long distances, but the stock unfortunately does not have at the bottom of the rail WEAVER. There are only two screws of the SWIVEL system, which is not an optimal.Our WEAVER kit eliminates...

View

Trigger guard CZ 457 (tactical)

Trigger guard CZ 457 (tactical) 2

Tuning

Trigger guard CZ 457 (tactical)

The new tactical trigger guard for small-bore rifle CZ 457 can be now purchased as a supplement to your small-bore rifle. Trigger guard is made of quality duralumin and it is possible to order it in five colour design (black, blue, red, khaki and gold). Colour design is solved by Cerakote spraying and the trigger guard itself is designed to best suit new...

View

External WEAVER for mirage band

External WEAVER for mirage band 2

Weapon accessories

External WEAVER for mirage band

External WEAVER handle of lenta (mirage band - heat screen) for situations, when a rifle isn´t equipped with the handle in standard. Our handle is ready for installation on the weaver rail and it is suitable for any regular lenta (mirage band). Handle of lenta is easilly installed on weaver rail (approx. 10 sec.), light and made of quality aerial...

View

Buttstock cover (genuine leather)

Buttstock cover (genuine leather) 2

Weapon accessories

Buttstock cover (genuine leather)

Additional cheekpiece for the stock. The cheekpiece is very well made, it is sewn from genuine leather and it can be easily and quickly attached to any classic stock. Attachment to the stock is done with Velcro. Variability is ensured by several foam pads, thanks to which you can easily achieve an additional increase of the cheek by approximately 20 mm...

View

Mirage band elastic (thermal shield)

Mirage band elastic (thermal shield) 2

Weapon accessories

Mirage band elastic (thermal shield)

The (Lenta) mirage band is designed for all types of rifles and is made from a highly durable and elastic material designed to divert heat from the barrel to prevent negative thermal effects from the mirage. The mirage is a thermal phenomenon that causes optical illusion. The Lenta (mirage band - thermal shield) helps to eliminate this.

View

Adjustable RECOIL PAD (universal)

Adjustable RECOIL PAD (universal) 2

Weapon accessories

Adjustable RECOIL PAD (universal)

The universal adjustable recoil pad mechanism is designed for all types of stocks. The adjustable mechanism of the recoil pad was developed with regard to the needs of shooters to easily and quickly change its settings.It is possible to use practically any rubber recoil pad that suits you on our height and length adjustable mechanics, or you can buy ATI...

View

Weight 170g with MLOK Mounting System

Weight 170g with MLOK Mounting System 2

Tuning

Weight 170g with MLOK Mounting System

This 170g weight is designed for attachment to any stock equipped with the MLOK mounting system (e.g., MDT stock). Available in various colors, there's an option for everyone.

View

Mirage band carrier (front and back part)

Mirage band carrier (front and back part) 2

Weapon accessories

Mirage band carrier (front and back part)

The set of lenta (mirage band) carriers. The set contains two parts of the carrier. The first one attaches to the front of the barrel and the second one attaches to the receiver. This is a spare part for lenta (mirage band), which we sell as a separate product on this website, but it can also be used as a proper base if you want to make a heat screen...

View

Weight 280g with MLOK Mounting System

Weight 280g with MLOK Mounting System 2

Tuning

Weight 280g with MLOK Mounting System

This 280g weight is designed for attachment to any stock equipped with the MLOK mounting system (e.g., MDT stock). Available in various colors, there's an option for everyone.

View

Weapon wiper for all calibers

Weapon wiper for all calibers 2

Weapon accessories

Weapon wiper for all calibers

View

Carbon rods for our LUXURY weapon wiper

Weapon accessories

Carbon rods for our LUXURY weapon wiper

Carbon rods for our LUXURY weapon wiper. We supply carbon rods in diameters of 4, 5, 6, 7, 8 and 10 mm and in lengths of 350, 450, 550, 650, 750, 850, 950 and 1050 mm. So all you need to clean your weapons is a handle, and you put carbon rods in it as you see fit. Replacing one rod with another does not take more than 1 second!The thread at the end of the...

View

Fast Ammo 2 pin

Fast Ammo 2 pin 2

Weapon accessories

Fast Ammo 2 pin

Fast Ammo 2 is an easy way to refill your capacity and also to quickly reload your weapon. The tactical accessory is easy to install with a Velcro fastener. Fast Ammo 2 is designed for ammo from .223 through .308 to .338 calibre.

View

Fast Ammo 3 pin

Fast Ammo 3 pin 2

Weapon accessories

Fast Ammo 3 pin

Fast Ammo 3 is your easy way to refill capacity and also to quickly reload your weapon. The tactical accessory is easy to install via the Velcro fastener, which is included in the delivery and can also be ordered separately. The Fast Ammo 3 is designed for 3 extra ammo (from .223 through .308 to .338 calibre)

View

Stock screw SA 58 (vz 58, 585 and clones)

Stock screw SA 58 (vz 58, 585 and clones) 2

Tuning

Stock screw SA 58 (vz 58, 585 and clones)

Modernized version of the stock screw for SA 58 submachine gun (vz 58 and clones) on an Allen key. A big problem with the original screw, which has a classic "screw groove", is very complicated tightening or loosening of this screw. Either the screw cannot be tightened properly or, conversely, cannot be loosened. The stock screw we sell solves this...

View

Bubble level 25,4mm (1") LIBELA

Bubble level 25,4mm (1") LIBELA 2

Weapon accessories

Bubble level 25,4mm (1")

The quality 25.4mm (1") spirit level has been tested by our competitive shooters. Its construction is designed to withstand the high-powered weapons you may encounter in hunting and sniper rifles. The mounting system is made of anodized aircraft grade aluminum 6065T.It is a quality spirit level for reasonable money!

View

Bubble level 30mm LIBELA

Bubble level 30mm LIBELA 2

Weapon accessories

Bubble level 30mm

The quality 30mm spirit level has been tested by our competitive shooters. Its construction is designed to withstand the high-powered weapons you may encounter in hunting and sniper rifles. The mounting system is made of anodized aircraft grade aluminum 6065T.It is a quality spirit level for reasonable money!

View

Mounting two-piece 25.4mm (1 ") on 11mm rail - LOW

Mounting two-piece 25.4mm (1 ") on 11mm rail - LOW 2

Weapon accessories

Mounting two-piece 25.4mm (1 ") on 11mm rail - LOW

Two-piece LOW duralumin mounting is designed for riflescopes with a smaller objective, usually up to 40 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 25.4 mm (1 ") tube. The mounting is designed for an 11 mm rail.

View

Two-piece mounting 30mm on 11mm rail - LOW

Two-piece mounting 30mm on 11mm rail - LOW 2

Weapon accessories

Two-piece mounting 30mm on 11mm rail - LOW

Two-piece LOW duralumin mounting is designed for riflescopes with a smaller objective, usually up to 40 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 30mm tube. The mounting is designed for 11mm rail.

View

Rifle Tunnel + front sight included

Rifle Tunnel + front sight included 2

Optics

Rifle Tunnel PROF + front sight included

This is a universal rifle tunnel for all known brands of weapons. The rifle tunnel is made of solid material (high quality alloy AW 6082 T6) on CNC machines, the surface is sanded and black anodized.Perfect workmanship. Made in Czech Republic.

View

Rifle tunnel carrier with flap

Rifle tunnel carrier with flap 2

Optics

Rifle tunnel carrier with flap

Rifle tunnel carrier with flap for biathlon shooters. Easily and universally implementable carrier is designed for biathlon rifles with a main diameter of 22 mm. The carrier and the carrier flap are made of solid material (high quality dural AW 6082 T6) on CNC machines and the surface treatment is solved with black anodizing.Perfect workshop processing....

View

Mounting two-piece 25.4mm (1 ") on 11mm rail - HIGH

Weapon accessories

Mounting two-piece 25.4mm (1 ") on 11mm rail - HIGH

Two-piece HIGH duralumin mounting is designed for riflescopes with a larger objective, usually up to 60 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 25.4mm (1") tube. The mounting is designed for an 11 mm rail.

View

Mounting on weaver (picatinny) rail 30mm - LOW

Mounting on weaver (picatinny) rail 30mm - LOW 2

Weapon accessories

Mounting on weaver (picatinny) rail 30mm - LOW

Two-piece LOW duralumin mounting is designed for riflescopes with a smaller objective, usually up to 40 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 30mm tube. The mounting is designed for weaver (picatinny) rail.

View

Mounting on weaver (picatinny) rail 30mm - HIGH

Mounting on weaver (picatinny) rail 30mm - HIGH 2

Weapon accessories

Mounting on weaver (picatinny) rail 30mm - HIGH

Two-piece LOW duralumin mounting is designed for riflescopes with a smaller objective, usually up to 40 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 30mm tube. The mounting is designed for 11mm rail.

View

Mounting two-piece 25.4mm (1") on weaver (picatinny) - HIGH

Weapon accessories

Mounting two-piece 25.4mm (1") on weaver (picatinny) - HIGH

Two-piece HIGH duralumin mounting is designed for riflescopes with a larger objective, usually up to 60 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 25.4mm (1") tube. The mounting is designed for weaver (picatinny) rail.

View

Two-piece mounting 30mm on 11mm rail - HIGH

Two-piece mounting 30mm on 11mm rail - HIGH 2

Weapon accessories

Two-piece mounting 30mm on 11mm rail - HIGH

Two-piece HIGH duralumin mounting is designed for riflescopes with a smaller objective, usually up to 40 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 30mm tube. The mounting is designed for 11mm rail.

View

One-piece mounting on weaver (picatinny) rail 30mm and 25,4m(1") with BUBBLE LEVEL

One-piece mounting on weaver (picatinny) rail 30mm and 25,4m(1") with BUBBLE LEVEL 2

Weapon accessories

One-piece mounting on weaver (picatinny) rail 30mm and 25,4m(1") with BUBBLE LEVEL

The one-piece duralumin mount with integrated bubble level is designed for riflescopes with lenses, usually up to 60 mm. Mounting is by means of screws on the right part of the mount. This mount is suitable for mounting rifle scopes or any other device with both 30mm and 25,4mm (1") tube (for smaller rifle scopes, defining links are included). The mount...

View

One-piece mounting 30mm / 25,4mm(1") on 11mm rail with BUBBLE LEVEL

One-piece mounting 30mm / 25,4mm(1") on 11mm rail with BUBBLE LEVEL 2

Weapon accessories

One-piece mounting 30mm / 25,4mm(1") on 11mm rail with BUBBLE LEVEL

The one-piece duralumin mount with integrated bubble level is designed for riflescopes with lenses, usually up to 60 mm. Mounting is by means of screws on the right part of the mount. This mount is suitable for mounting rifle scopes or any other device with both 30mm and 25,4mm (1") tube (for smaller rifle scopes, defining links are included). The mount...

View

One-piece mounting on weaver (picatinny) rail 30mm/25,4mm(1") with SLIDE

One-piece mounting on weaver (picatinny) rail 30mm/25,4mm(1") with SLIDE 2

Weapon accessories

One-piece mounting on weaver (picatinny) rail 30mm/25,4mm(1") with SLIDE

The one-piece duralumin mount with integrated base is designed for riflescopes with lenses, usually up to 60 mm. The mounting is by means of screws on the right part of the mount. This mount is suitable for mounting rifle scopes or any other device with both 30mm and 25,4mm tubes (for smaller rifle scopes, defining links are included). THIS MOUNT IS...

View

Mounting on weaver (picatinny) rail 34mm

Mounting on weaver (picatinny) rail 34mm 2

Weapon accessories

Mounting on weaver (picatinny) rail 34mm

Two-piece duralumin mounting is designed for riflescopes with objective, usually up to 60 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 34mm tube. The mounting is designed for weaver (picatinny) rail.

View

1
2

Product added to wishlist

Product added to compare.