Weapon accessories Rubber feet for bipod / tripod gumy3 The rubber feet are very precisely made and their construction is especially suitable for use on bipods or tripods. The body of the foot is made of a special polymer and is resistant to water, high temperatures, chemicals and normal mechanical damage. The M5 size screw is stainless steel made of high-quality A4/70 steel, which has increased resistance to... View
Tuning Trigger resistance springs for CZ 455 / ZKM 452 spring455 A set of springs used to reduce the resistance of the CZ 455 trigger from the factory 1.3 kg to 0.3 kg, according to your preferences. The strength of the trigger resistance is affected by more factors than just the force of the springs. Therefore, take the achievable resistance as a guide, it can vary by a few percent. The adjusting nuts on the spring... View
Tuning Trigger resistance springs CZ P-10 spring10 The set of springs is used to reduce the resistance of the trigger of the CZ P-10 pistol. Our set of springs is fully compatible with variants of pistols S, C, SC, F and contains two versions of the impact spring.One reduces the resistance of the trigger by 0.25 kg, the other by 0.5 kg, so it only depends on you which variant you choose.The springs are... View
Spare parts and accessories KeyMOD Modul for Tactical EVO TK3 and TK4 bipod modtkeym Spare Fastening Key MOD Modul for Bipod Tactical EVO TK3 and TK4. Modul is easily exchangeable and it allows quick „adjustment“ of Bipod on other fastening systems. Perfect workmanship. View
Tuning SAKO 75, 85, 595 and 695 trigger resistance spring springsako Spring used to reduce the resistance of the trigger SAKO 75, 85 595, 695 and increase its accuracy.Using the trigger spring, you can reduce the resistance of the trigger up to 0.5 kg.When the lowest trigger resistance is set, firing may occur when the weapon is unlocked! This fact must be taken into account! For the above reasons, we do not recommend... View
Spare parts and accessories M-LOK Modul for Tactical EVO TK3 and TK4 bipod modtmlok Spare Fastening M LOK Modul for Bipod Tactical EVO TK3 and TK4. Modul is easily exchangeable and it allows quick „adjustment“ of Bipod on other fastening systems. Perfect workmanship. View
Tuning Trigger resistance springs for CZ SCORPION EVO springevo A set of springs used to reduce the resistance of the trigger from the factory 5kg to 2.5kg. The CZ SCORPION EVO 3 weapon is designed from the ground up as a service weapon, and for this reason the resistance of the trigger and its characteristics are designed to maintain shooting safety even in crisis situations and shooting in gloves. During the... View
Spare parts and accessories UIT Modul for Tactical EVO TK3 and TK4 bipod moduit Spare Fastening UIT Modul for Bipod Tactical EVO TK3 and TK4. Modul is easily exchangeable and it allows quick „adjustment“ of Bipod on other fastening systems. Perfect workmanship. View
Tuning Browning X-BOLT trigger resistance spring springbrow Spring used to reduce the resistance of the trigger Browning X-BOLT and increase its accuracy.Using the trigger spring, you can reduce the resistance of the trigger up to 0.5 kg.When the lowest trigger resistance is set, firing may occur when the weapon is unlocked! This fact must be taken into account! For the above reasons, we do not recommend setting... View
Spare parts and accessories SPIGOT Modul for Tactical EVO TK3 and TK4 bipod modspig Spare Fastening SPIGOT Modul for Bipod Tactical EVO TK3 and TK4. Modul is easily exchangeable and it allows quick „adjustment“ of Bipod on other fastening systems. Perfect workmanship. View
Tuning Walther steel cartridge plug zatwalther Spare part for WALTHER steel cartridges.Long-term use of some Walther steel cartridges wears out the thread on the cartridge. This is manifested mainly by the fact that there is a layer of small brass sawdust in the area of the pressure regulator.Over time, the thread on the cartridge becomes so worn that the thread does not withstand the air pressure... View
Spare parts and accessories UIT Modul for Bipod F1 modf1uit Spare Fastening UIT Modul for Bipod F-Class F1. Modul is easily exchangeable and it allows quick „adjustment“ of Bipod on other fastening systems. View
