TACTICAL EVO - Hlavní strana

Showing 49-72 of 167 item(s)

Bipod TACTICAL PRS LOCK 6,5-8" (WEAVER)

Bipod TACTICAL PRS LOCK 6,5-8" (WEAVER) 2

Bipods

Bipod TACTICAL PRS LOCK 6,5-8" (WEAVER)

The Tactical Evo PRS LOCK bipod is made of high-quality AW 7075 duralumin and is processed extremely precisely. Bipod Tactical Evo PRS(WEAVER) is a great choice for every police, army or sports shooter of tactical disciplines PRS. Of course, the bipods will also serve other shooters who prefer 100% quality. Made in Czech Republic. The Tactical PRS LOCK...

View

Bipod TACTICAL PRS 6,5-8" (ARCA Swiss)

Bipod TACTICAL PRS 6,5-8" (ARCA Swiss) 2

Bipods

Bipod TACTICAL PRS 6,5-8" (ARCA Swiss)

Bipod Tactical Evo PRS is made of high quality duralumin AW 7075 and extremely precisely machined. Bipod Tactical Evo PRS (ARCA Swiss) is a great choice for every police, army or sports shooter of tactical disciplines PRS. Of course, the bipods will also serve other shooters who prefer 100% quality. Made in Czech Republic.The Bipod has been tested in the...

View

Tunning trigger for CZ P-10 (black)

Tunning trigger for CZ P-10 (black) 2

Tuning

Tunning trigger for CZ P-10 (black)

Tuning trigger for CZ P-10 pistol. The trigger is made of high quality AW 7075 material and the surface treatment is solved with black or red anodized. Installation is easy, so you're done in minutes and your pistol gets an interesting design element.We recommend using it in combination with an extended magazine capture of a similar design.

View

Bipod Tactical PRS UIT version

Bipod Tactical PRS UIT version 2

Bipods

Bipod TACTICAL PRS 6,5-8" (UIT)

Bipod Tactical Evo PRS is made of high quality duralumin AW 7075 and extremely precisely machined. Bipod Tactical Evo PRS (UIT) is a great choice for every police, army or sports shooter of tactical disciplines PRS. Of course, the bipods will also serve other shooters who prefer 100% quality. Made in Czech Republic.The Bipod has been tested in the most...

View

Extended magazine catch CZ P-10

Extended magazine catch CZ P-10 2

Tuning

Extended magazine catch CZ P-10

Extended magazine catch CZ P-10. The catch is made of high quality AW 7075 material and the surface treatment is solved with black or red anodized. Installation is easy, so you are done in a few minutes and your pistol will get an interesting and above all functional design element.Designed for the version with a rotating catch. It doesn't work on the...

View

Bipod PRS KeyMOD

Bipod PRS KeyMOD 2

Bipods

Bipod TACTICAL PRS 6,5-8" (KeyMOD)

Bipod Tactical Evo PRS is made of high quality duralumin AW 7075 and extremely precisely machined. Bipod Tactical Evo PRS (KeyMOD) is a great choice for every police, army or sports shooter of tactical disciplines PRS. Of course, the bipods will also serve other shooters who prefer 100% quality. Made in Czech Republic.The Bipod has been tested in the most...

View

Stock screw SA 58 (vz 58, 585 and clones)

Stock screw SA 58 (vz 58, 585 and clones) 2

Tuning

Stock screw SA 58 (vz 58, 585 and clones)

Modernized version of the stock screw for SA 58 submachine gun (vz 58 and clones) on an Allen key. A big problem with the original screw, which has a classic "screw groove", is very complicated tightening or loosening of this screw. Either the screw cannot be tightened properly or, conversely, cannot be loosened. The stock screw we sell solves this...

View

Tactical bipod PRS mlok.

Tactical bipod PRS mlok. 2

Bipods

Bipod TACTICAL PRS 6,5-8" (M-LOK)

Bipod Tactical Evo PRS is made of high quality duralumin AW 7075 and extremely precisely machined. Bipod Tactical Evo PRS (M-LOK) is a great choice for every police, army or sports shooter of tactical disciplines PRS. Of course, the bipods will also serve other shooters who prefer 100% quality. Made in Czech Republic.The Bipod has been tested in the most...

View

Forehead breech for CZ P-10

Forehead breech for CZ P-10 2

Tuning

Forehead breech for CZ P-10

Dural breech for CZ P-10 pistol. Breech is made of high quality material AW 7075 and the surface treatment is solved with black or red anodized. Installation is easy, so you're done in minutes and your pistol gets a new and extraordinary dimension.It also works with the first generation pistol.

View

ARCA Swiss rail for M-LOK

ARCA Swiss rail for M-LOK 2

Weapon accessories

ARCA Swiss rail for M-LOK

The ARCA Swiss rail is a great addition to any rifle that has a chassis with an M-LOK clamping system. It can be used wherever the weapon uses a forend (chassis) with an M-LOK clamping system. A typical example is the weapons used for PRS shooting disciplines.This will give you a big advantage! You can easily move bipods or other accessories efficiently...

View

Trigger resistance spring CZ 557, 550 and 527

Tuning

Trigger resistance spring CZ 557, 550 and 527

Spring used to reduce the resistance of the trigger CZ 557, CZ 550, CZ 527 and increase its accuracy.Using the trigger spring, you can reduce the resistance of the trigger up to 0.5 kg.When the lowest trigger resistance is set, firing may occur when the weapon is unlocked! This fact must be taken into account! For the above reasons, we do not recommend...

View

CZ 457 trigger resistance springs

Tuning

CZ 457 trigger resistance springs

A set of springs used to reduce the resistance of the CZ 457 trigger and increase its accuracy.The set includes two springs, with the trigger spring reducing the factory resistance of the trigger by -50% and the impact spring, which has a 10% higher resistance. Using the trigger spring, you can reduce the trigger resistance to 0.5 kg.A stronger impact...

View

Trigger resistance spring TIKKA T3, T3x and T1x

Tuning

Trigger resistance spring TIKKA T3, T3x and T1x

Spring used to reduce the resistance of the trigger for TIKKA T3, T3x, T1x and increase its accuracy.Using the trigger spring, you can reduce the resistance of the trigger up to 0.5 kg. When the lowest trigger resistance is set, firing may occur when the weapon is unlocked! This fact must be taken into account! For the above reasons, we do not recommend...

View

Trigger resistance springs for CZ 455 / ZKM 452

Tuning

Trigger resistance springs for CZ 455 / ZKM 452

A set of springs used to reduce the resistance of the CZ 455 trigger from the factory 1.3 kg to 0.3 kg, according to your preferences. The strength of the trigger resistance is affected by more factors than just the force of the springs. Therefore, take the achievable resistance as a guide, it can vary by a few percent. The adjusting nuts on the spring...

View

Puškohled 8

Puškohled 8 2

Optics

Puškohled 8

View

Trigger resistance springs CZ P-10

Tuning

Trigger resistance springs CZ P-10

The set of springs is used to reduce the resistance of the trigger of the CZ P-10 pistol. Our set of springs is fully compatible with variants of pistols S, C, SC, F and contains two versions of the impact spring.One reduces the resistance of the trigger by 0.25 kg, the other by 0.5 kg, so it only depends on you which variant you choose.The springs are...

View

Bubble level 25,4mm (1") LIBELA

Bubble level 25,4mm (1") LIBELA 2

Weapon accessories

Bubble level 25,4mm (1")

The quality 25.4mm (1") spirit level has been tested by our competitive shooters. Its construction is designed to withstand the high-powered weapons you may encounter in hunting and sniper rifles. The mounting system is made of anodized aircraft grade aluminum 6065T.It is a quality spirit level for reasonable money!

View

SAKO 75, 85, 595 and 695 trigger resistance spring

Tuning

SAKO 75, 85, 595 and 695 trigger resistance spring

Spring used to reduce the resistance of the trigger SAKO 75, 85 595, 695 and increase its accuracy.Using the trigger spring, you can reduce the resistance of the trigger up to 0.5 kg.When the lowest trigger resistance is set, firing may occur when the weapon is unlocked! This fact must be taken into account! For the above reasons, we do not recommend...

View

Bubble level 30mm LIBELA

Bubble level 30mm LIBELA 2

Weapon accessories

Bubble level 30mm

The quality 30mm spirit level has been tested by our competitive shooters. Its construction is designed to withstand the high-powered weapons you may encounter in hunting and sniper rifles. The mounting system is made of anodized aircraft grade aluminum 6065T.It is a quality spirit level for reasonable money!

View

Trigger resistance springs for CZ SCORPION EVO

Tuning

Trigger resistance springs for CZ SCORPION EVO

A set of springs used to reduce the resistance of the trigger from the factory 5kg to 2.5kg. The CZ SCORPION EVO 3 weapon is designed from the ground up as a service weapon, and for this reason the resistance of the trigger and its characteristics are designed to maintain shooting safety even in crisis situations and shooting in gloves. During the...

View

Browning X-BOLT trigger resistance spring

Tuning

Browning X-BOLT trigger resistance spring

Spring used to reduce the resistance of the trigger Browning X-BOLT and increase its accuracy.Using the trigger spring, you can reduce the resistance of the trigger up to 0.5 kg.When the lowest trigger resistance is set, firing may occur when the weapon is unlocked! This fact must be taken into account! For the above reasons, we do not recommend setting...

View

Anti-slip rubbers for bipod

Spare parts and accessories

Anti-slip rubbers for bipod Tactical Evo TK3 and TK4

Anti-slip rubbers are designed for bipod Tactical Evo TK3 (TK4) and are very easy and fast to stick. The rubber is made of 2mm thick self-adhesive rubber in the form of a bipod Tactical Evo TK3 (TK4) support rail and is not compatible with other rails.

View

HARD support rail for TK3 and TK4 bipod

HARD support rail for TK3 and TK4 bipod 2

Spare parts and accessories

HARD support rail for TK3 and TK4 bipod

The HARD support rail (designed for hard surfaces such as concrete and ice) is primarily intended for hard surfaces, but it also performs very well on other surfaces (mud, soil, etc.). The rail is easily replaceable and allows for quick modification of the support system.

View

Mounting two-piece 25.4mm (1 ") on 11mm rail - LOW

Mounting two-piece 25.4mm (1 ") on 11mm rail - LOW 2

Weapon accessories

Mounting two-piece 25.4mm (1 ") on 11mm rail - LOW

Two-piece LOW duralumin mounting is designed for riflescopes with a smaller objective, usually up to 40 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 25.4 mm (1 ") tube. The mounting is designed for an 11 mm rail.

View

1
2
3
4
…
7

Product added to wishlist

Product added to compare.