TACTICAL EVO - Hlavní strana

Showing 81-120 of 183 item(s)

Mounting two-piece 25.4mm (1 ") on 11mm rail - LOW

Mounting two-piece 25.4mm (1 ") on 11mm rail - LOW 2

Weapon accessories

Mounting two-piece 25.4mm (1 ") on 11mm rail - LOW

Two-piece LOW duralumin mounting is designed for riflescopes with a smaller objective, usually up to 40 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 25.4 mm (1 ") tube. The mounting is designed for an 11 mm rail.

View

Joint with bearing for bipod TK3 and TK4

Joint with bearing for bipod TK3 and TK4 2

Spare parts and accessories

Joint with bearing for bipod TK3 and TK4

Replacement Part for Tactical EVO Bipod Models TK3 and TK4 - Joint with Bearing and Weaver Rail. The joint with a bearing allows for perfect locking of the bipod, while also offering the ability to adjust the lever so that the lock can be smoothly overridden. The pressure required for tilting can be easily adjusted using the locking lever. Additionally,...

View

Two-piece mounting 30mm on 11mm rail - LOW

Two-piece mounting 30mm on 11mm rail - LOW 2

Weapon accessories

Two-piece mounting 30mm on 11mm rail - LOW

Two-piece LOW duralumin mounting is designed for riflescopes with a smaller objective, usually up to 40 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 30mm tube. The mounting is designed for 11mm rail.

View

Trigger resistance spring CZ 557, 550 and 527

Tuning

Trigger resistance spring CZ 557, 550 and 527

Spring used to reduce the resistance of the trigger CZ 557, CZ 550, CZ 527 and increase its accuracy.Using the trigger spring, you can reduce the resistance of the trigger up to 0.5 kg.When the lowest trigger resistance is set, firing may occur when the weapon is unlocked! This fact must be taken into account! For the above reasons, we do not recommend...

View

Joint with bearing for bipod TK3 and PRS

Joint with bearing for bipod TK3 and PRS 2

Spare parts and accessories

Joint with bearing for bipod TK3, TK4 and PRS

Spare part for bipod Tactical EVO model TK3, TK4 and PRS - joint with bearing. This spare part allows you to retrofit your Tactical Evo TK3 or PRS bipod with new functionality.This consists in the fact that you can tilt the bipod to the side just by pressing on the bipod. You can easily adjust the pressure required for tilting with the locking handle. In...

View

CZ 457 trigger resistance springs

Tuning

CZ 457 trigger resistance springs

A set of springs used to reduce the resistance of the CZ 457 trigger and increase its accuracy.The set includes two springs, with the trigger spring reducing the factory resistance of the trigger by -50% and the impact spring, which has a 10% higher resistance. Using the trigger spring, you can reduce the trigger resistance to 0.5 kg.A stronger impact...

View

Spare bearing for bipod TK3, TK4 and PRS

Spare bearing for bipod TK3, TK4 and PRS 2

Spare parts and accessories

Spare bearing for bipod TK3, TK4 and PRS

Replacement joint bearing of the Tactical EVO bipod model TK3, TK4 and PRS.

View

Trigger resistance spring TIKKA T3, T3x and T1x

Tuning

Trigger resistance spring TIKKA T3, T3x and T1x

Spring used to reduce the resistance of the trigger for TIKKA T3, T3x, T1x and increase its accuracy.Using the trigger spring, you can reduce the resistance of the trigger up to 0.5 kg. When the lowest trigger resistance is set, firing may occur when the weapon is unlocked! This fact must be taken into account! For the above reasons, we do not recommend...

View

Rubber feet for bipod / tripod

Rubber feet for bipod / tripod 2

Weapon accessories

Rubber feet for bipod / tripod

The rubber feet are very precisely made and their construction is especially suitable for use on bipods or tripods. The body of the foot is made of a special polymer and is resistant to water, high temperatures, chemicals and normal mechanical damage. The M5 size screw is stainless steel made of high-quality A4/70 steel, which has increased resistance to...

View

Trigger resistance springs for CZ 455 / ZKM 452

Tuning

Trigger resistance springs for CZ 455 / ZKM 452

A set of springs used to reduce the resistance of the CZ 455 trigger from the factory 1.3 kg to 0.3 kg, according to your preferences. The strength of the trigger resistance is affected by more factors than just the force of the springs. Therefore, take the achievable resistance as a guide, it can vary by a few percent. The adjusting nuts on the spring...

View

Trigger resistance springs CZ P-10

Tuning

Trigger resistance springs CZ P-10

The set of springs is used to reduce the resistance of the trigger of the CZ P-10 pistol. Our set of springs is fully compatible with variants of pistols S, C, SC, F and contains two versions of the impact spring.One reduces the resistance of the trigger by 0.25 kg, the other by 0.5 kg, so it only depends on you which variant you choose.The springs are...

View

KeyMOD Modul for Tactical EVO TK3 bipod

KeyMOD Modul for Tactical EVO TK3 bipod 2

Spare parts and accessories

KeyMOD Modul for Tactical EVO TK3 and TK4 bipod

Spare Fastening Key MOD Modul for Bipod Tactical EVO TK3 and TK4. Modul is easily exchangeable and it allows quick „adjustment“ of Bipod on other fastening systems. Perfect workmanship.

View

SAKO 75, 85, 595 and 695 trigger resistance spring

Tuning

SAKO 75, 85, 595 and 695 trigger resistance spring

Spring used to reduce the resistance of the trigger SAKO 75, 85 595, 695 and increase its accuracy.Using the trigger spring, you can reduce the resistance of the trigger up to 0.5 kg.When the lowest trigger resistance is set, firing may occur when the weapon is unlocked! This fact must be taken into account! For the above reasons, we do not recommend...

View

M LOK Modul for Tactical EVO TK3 bipod

M LOK Modul for Tactical EVO TK3 bipod 2

Spare parts and accessories

M-LOK Modul for Tactical EVO TK3 and TK4 bipod

Spare Fastening M LOK Modul for Bipod Tactical EVO TK3 and TK4. Modul is easily exchangeable and it allows quick „adjustment“ of Bipod on other fastening systems. Perfect workmanship.

View

Trigger resistance springs for CZ SCORPION EVO

Tuning

Trigger resistance springs for CZ SCORPION EVO

A set of springs used to reduce the resistance of the trigger from the factory 5kg to 2.5kg. The CZ SCORPION EVO 3 weapon is designed from the ground up as a service weapon, and for this reason the resistance of the trigger and its characteristics are designed to maintain shooting safety even in crisis situations and shooting in gloves. During the...

View

UIT Modul for Tactical EVO TK3 and TK4 bipod

UIT Modul for Tactical EVO TK3 and TK4 bipod 2

Spare parts and accessories

UIT Modul for Tactical EVO TK3 and TK4 bipod

Spare Fastening UIT Modul for Bipod Tactical EVO TK3 and TK4. Modul is easily exchangeable and it allows quick „adjustment“ of Bipod on other fastening systems. Perfect workmanship.

View

Browning X-BOLT trigger resistance spring

Tuning

Browning X-BOLT trigger resistance spring

Spring used to reduce the resistance of the trigger Browning X-BOLT and increase its accuracy.Using the trigger spring, you can reduce the resistance of the trigger up to 0.5 kg.When the lowest trigger resistance is set, firing may occur when the weapon is unlocked! This fact must be taken into account! For the above reasons, we do not recommend setting...

View

SPIGOT Modul for Tactical EVO TK3 bipod

SPIGOT Modul for Tactical EVO TK3 bipod 2

Spare parts and accessories

SPIGOT Modul for Tactical EVO TK3 and TK4 bipod

Spare Fastening SPIGOT Modul for Bipod Tactical EVO TK3 and TK4. Modul is easily exchangeable and it allows quick „adjustment“ of Bipod on other fastening systems. Perfect workmanship.

View

Walther LG 300 / LG 400

Walther LG 300 / LG 400 2

Tuning

Walther steel cartridge plug

Spare part for WALTHER steel cartridges.Long-term use of some Walther steel cartridges wears out the thread on the cartridge. This is manifested mainly by the fact that there is a layer of small brass sawdust in the area of the pressure regulator.Over time, the thread on the cartridge becomes so worn that the thread does not withstand the air pressure...

View

UIT Modul for Bipod F1

UIT Modul for Bipod F1 2

Spare parts and accessories

UIT Modul for Bipod F1

Spare Fastening UIT Modul for Bipod F-Class F1. Modul is easily exchangeable and it allows quick „adjustment“ of Bipod on other fastening systems.

View

Filling PIN for WALTHER air rifles (universal)

Filling PIN for WALTHER air rifles (universal) 2

Tuning

Filling PIN for WALTHER air rifles (universal)

Universal filling PIN (valve) for WALTHER air rifles and pistols. The filling pin is designed for both types of cylinders, so it can be mounted on both 200 and 300 bar pressure bottles (bombs).

View

WEAVER Modul for Bipod F1

Spare parts and accessories

WEAVER Modul for Bipod F1

Spare Fastening WEAVER Modul for Bipod F-Class F1. Modul is easily exchangeable and it allows quick „adjustment“ of Bipod on other fastening system.

View

Enlargement of the Walther LG 300 pressure regulator chamber

Enlargement of the Walther LG 300 pressure regulator chamber 2

Tuning

Enlargement of the Walther LG 300 pressure regulator chamber

Ring for enlarging the chamber of the pressure regulator for the Walther LG 300 air rifle.The chamber of the standard pressure regulator of the PCP air rifle Walther LG 300 is designed for shooting with a power of 7.5J. With our rings, you can easily achieve an enlargement of the chamber and thus the possibility to set the power of the Walther LG 300 air...

View

WEAVER Modul for Bipod Tactical TK3

WEAVER Modul for Bipod Tactical TK3 2

Spare parts and accessories

WEAVER Modul for Bipod Tactical TK3, TK4 and PRS

Spare Fastening WEAVER Modul for Bipod Tactical Evo TK3, TK4 and PRS. Modul is easily exchangeable and it allows quick „adjustment“ of Bipod on other fastening systems.

View

ARCA Swiss Modul for Bipod Tactical TK3 and TK4

ARCA Swiss Modul for Bipod Tactical TK3 and TK4 2

Spare parts and accessories

ARCA Swiss Modul for Bipod Tactical TK3 and TK4

Spare Fastening ARCA Swiss Modul for Bipod Tactical Evo TK3 a TK4. Modul is easily exchangeable and it allows quick „adjustment“ of Bipod on other fastening systems.

View

Reduction for Walther LG 400

Reduction for Walther LG 400 2

Tuning

Reduction for Walther LG 400

By replacing the pressure regulator from the LG 400 with a pressure regulator from the LG 300, you will get much greater setting options and the excellent Walther LG 400 air rifle will thus enter a whole new dimension.In the Czech Republic, the limit for an air rifle is in category D (over-the-counter from the age of 18) to 16J. So why not make the most...

View

ARCA Swiss Modul for Bipod PRS

ARCA Swiss Modul for Bipod PRS 2

Spare parts and accessories

ARCA Swiss Modul for Bipod PRS

Spare Fastening ARCA Swiss Modul for Bipod Tactical Evo PRS. Modul is easily exchangeable and it allows quick „adjustment“ of Bipod on other fastening systems.

View

Silencer for Walther LG 300/400

Silencer for Walther LG 300/400 2

Tuning

Silencer for Walther LG 300/400

You have a Walther LG 300 or Walther LG 400 air rifle and you don't want to disturb your neighbors with training noise. Then fit a standard front sight that you have on your air rifle with our reduction set. You will get an almost inaudible shot and you can improve your shooting skills at home.The set contains all the necessary components and its assembly...

View

ARCA Swiss Modul for Bipod F1

ARCA Swiss Modul for Bipod F1 2

Spare parts and accessories

ARCA Swiss Modul for Bipod F1

Spare Fastening ARCA Swiss Modul for Bipod F-Class F1. Modul is easily exchangeable and it allows quick „adjustment“ of Bipod on other fastening systems.

View

Walther regulator pressure transducer

Walther regulator pressure transducer 2

Tuning

Walther regulator pressure transducer

Do you have a Walther LG 300 or Walther LG 400 air rifle and need to set the correct pressure on the regulator or check if your regulator is working properly?The device we manufacture for precise adjustment and pressure measurement will allow you to do so comfortably and quickly.The pressure transducer is universal for Walther LG 300 and Walther LG 400...

View

WEAVER LOCK Modul for Bipods F1 Class

WEAVER LOCK Modul for Bipods F1 Class 2

Spare parts and accessories

WEAVER LOCK Modul for Bipods F1 Class

Replacement WEAVER LOCK module for Tactical EVO F1 Class bipods. The module is easily replaceable and allows quick "disguise" of the bipod to another clamping system.This module is additionally equipped with a security lock system. The lock system was developed for those users who move when shooting and need to guarantee that their bipod will not come...

View

WEAVER LOCK module for bipods TK3, TK4 and PRS

WEAVER LOCK module for bipods TK3, TK4 and PRS 2

Spare parts and accessories

WEAVER LOCK module for bipods TK3, TK4 and PRS

Replacement WEAVER LOCK module for Tactical EVO TK3, TK4 and PRS bipods. The module is easily replaceable and allows quick "disguise" of the bipod to another clamping system.This module is additionally equipped with a security lock system. The lock system was developed for those users who move when shooting and need to guarantee that their bipod will not...

View

Walther LG 300 tension lever pin

Walther LG 300 tension lever pin 2

Tuning

Walther LG 300 tension lever pin

The Walther LG 300 air rifle has a relatively long tension lever, so if you fit it with a riflescope, you will encounter a problem that the original tension lever cannot be pulled. All that remains is to remove and shorten the tension lever. You can then fit it with a duralumin pin made by us. We supply the tensioning pin in silver or black.The set...

View

Lock system for bipod Tactical EVO F1 Class

Spare parts and accessories

Lock system for bipod Tactical EVO F1 Class

Lock system for bipod Tactical EVO F1 Class. The lock system was developed for those users who move when shooting and need to guarantee that their bipod will not come loose, for example due to accidental catching behind a pontoon belt, clothing, etc.The lock system prevents proper opening, but it can be used to open (release - unlock) with one hand only...

View

Lock system for TK3, TK4 and PRS bipods

Lock system for TK3, TK4 and PRS bipods 2

Spare parts and accessories

Lock system for TK3, TK4 and PRS bipods

Lock system for bipod Tactical EVO TK3, TK4 and PRS. The lock system was developed for those users who move when shooting and need to guarantee that their bipod will not come loose, for example due to accidental catching behind a pontoon belt, clothing, etc.The lock system prevents proper opening, but it can be used to open (release - unlock) with one...

View

UIT Modul for Tactical EVO PRS bipod

Spare parts and accessories

UIT Modul for Tactical EVO PRS bipod

Spare Fastening UIT Modul for Bipod Tactical EVO PRS. Modul is easily exchangeable and it allows quick „adjustment“ of Bipod on other fastening systems. Perfect workmanship.

View

M-LOK Modul for Tactical EVO PRS bipod

Spare parts and accessories

M-LOK Modul for Tactical EVO PRS bipod

Spare Fastening M-LOK Modul for Bipod Tactical EVO PRS. Modul is easily exchangeable and it allows quick „adjustment“ of Bipod on other fastening systems. Perfect workmanship.

View

Key MOD Modul for Tactical EVO PRS bipod

Spare parts and accessories

Key MOD Modul for Tactical EVO PRS bipod

Spare Fastening Key MOD Modul for Bipod Tactical EVO PRS. Modul is easily exchangeable and it allows quick „adjustment“ of Bipod on other fastening systems. Perfect workmanship.

View

Duralumin grips for CZ 75 and their clones

Duralumin grips for CZ 75 and their clones 2

Tuning

Duralumin grips for CZ 75 and their clones

High-quality and very precisely processed duralumin butts for CZ self-loading pistols. The grips are intended for all those who want to equip their weapon with something unconventional, exceptional and at the same time perfectly functional. Mounting the grips is very easy, so you're done in a few minutes. The screws are included in the package.

View

Rifle Tunnel + front sight included

Rifle Tunnel + front sight included 2

Optics

Rifle Tunnel PROF + front sight included

This is a universal rifle tunnel for all known brands of weapons. The rifle tunnel is made of solid material (high quality alloy AW 6082 T6) on CNC machines, the surface is sanded and black anodized.Perfect workmanship. Made in Czech Republic.

View

1
2
3
4
5

Product added to wishlist

Product added to compare.