TACTICAL EVO - Hlavní strana

Showing 81-120 of 212 item(s)

HARD support rail for TK3 and TK4 bipod

HARD support rail for TK3 and TK4 bipod 2

Spare parts and accessories

HARD support rail for TK3 and TK4 bipod

The HARD support rail (designed for hard surfaces such as concrete and ice) is primarily intended for hard surfaces, but it also performs very well on other surfaces (mud, soil, etc.). The rail is easily replaceable and allows for quick modification of the support system.

View

Bubble level 30mm LIBELA

Bubble level 30mm LIBELA 2

Weapon accessories

Bubble level 30mm

The quality 30mm spirit level has been tested by our competitive shooters. Its construction is designed to withstand the high-powered weapons you may encounter in hunting and sniper rifles. The mounting system is made of anodized aircraft grade aluminum 6065T.It is a quality spirit level for reasonable money!

View

Walther LG 300 / LG 400

Walther LG 300 / LG 400 2

Tuning

Walther steel cartridge plug

Spare part for WALTHER steel cartridges.Long-term use of some Walther steel cartridges wears out the thread on the cartridge. This is manifested mainly by the fact that there is a layer of small brass sawdust in the area of the pressure regulator.Over time, the thread on the cartridge becomes so worn that the thread does not withstand the air pressure...

View

Joint with bearing for bipod TK3 and TK4

Joint with bearing for bipod TK3 and TK4 2

Spare parts and accessories

Joint with bearing for bipod TK3 and TK4

Replacement Part for Tactical EVO Bipod Models TK3 and TK4 - Joint with Bearing and Weaver Rail. The joint with a bearing allows for perfect locking of the bipod, while also offering the ability to adjust the lever so that the lock can be smoothly overridden. The pressure required for tilting can be easily adjusted using the locking lever. Additionally,...

View

Bubble level 25,4mm (1") LIBELA

Bubble level 25,4mm (1") LIBELA 2

Weapon accessories

Bubble level 25,4mm (1")

The quality 25.4mm (1") spirit level has been tested by our competitive shooters. Its construction is designed to withstand the high-powered weapons you may encounter in hunting and sniper rifles. The mounting system is made of anodized aircraft grade aluminum 6065T.It is a quality spirit level for reasonable money!

View

Filling PIN for WALTHER air rifles (universal)

Filling PIN for WALTHER air rifles (universal) 2

Tuning

Filling PIN for WALTHER air rifles (universal)

Universal filling PIN (valve) for WALTHER air rifles and pistols. The filling pin is designed for both types of cylinders, so it can be mounted on both 200 and 300 bar pressure bottles (bombs).

View

Mounting two-piece 25.4mm (1 ") on 11mm rail - LOW

Mounting two-piece 25.4mm (1 ") on 11mm rail - LOW 2

Weapon accessories

Mounting two-piece 25.4mm (1 ") on 11mm rail - LOW

Two-piece LOW duralumin mounting is designed for riflescopes with a smaller objective, usually up to 40 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 25.4 mm (1 ") tube. The mounting is designed for an 11 mm rail.

View

Joint with bearing for bipod TK3 and PRS

Joint with bearing for bipod TK3 and PRS 2

Spare parts and accessories

Joint with bearing for bipod TK3, TK4 and PRS

Spare part for bipod Tactical EVO model TK3, TK4 and PRS - joint with bearing. This spare part allows you to retrofit your Tactical Evo TK3 or PRS bipod with new functionality.This consists in the fact that you can tilt the bipod to the side just by pressing on the bipod. You can easily adjust the pressure required for tilting with the locking handle. In...

View

Enlargement of the Walther LG 300 pressure regulator chamber

Enlargement of the Walther LG 300 pressure regulator chamber 2

Tuning

Enlargement of the Walther LG 300 pressure regulator chamber

Ring for enlarging the chamber of the pressure regulator for the Walther LG 300 air rifle.The chamber of the standard pressure regulator of the PCP air rifle Walther LG 300 is designed for shooting with a power of 7.5J. With our rings, you can easily achieve an enlargement of the chamber and thus the possibility to set the power of the Walther LG 300 air...

View

Two-piece mounting 30mm on 11mm rail - LOW

Two-piece mounting 30mm on 11mm rail - LOW 2

Weapon accessories

Two-piece mounting 30mm on 11mm rail - LOW

Two-piece LOW duralumin mounting is designed for riflescopes with a smaller objective, usually up to 40 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 30mm tube. The mounting is designed for 11mm rail.

View

Spare bearing for bipod TK3, TK4 and PRS

Spare bearing for bipod TK3, TK4 and PRS 2

Spare parts and accessories

Spare bearing for bipod TK3, TK4 and PRS

Replacement joint bearing of the Tactical EVO bipod model TK3, TK4 and PRS.

View

Reduction for Walther LG 400

Reduction for Walther LG 400 2

Tuning

Reduction for Walther LG 400

By replacing the pressure regulator from the LG 400 with a pressure regulator from the LG 300, you will get much greater setting options and the excellent Walther LG 400 air rifle will thus enter a whole new dimension.In the Czech Republic, the limit for an air rifle is in category D (over-the-counter from the age of 18) to 16J. So why not make the most...

View

Silencer for Walther LG 300/400

Silencer for Walther LG 300/400 2

Tuning

Silencer for Walther LG 300/400

You have a Walther LG 300 or Walther LG 400 air rifle and you don't want to disturb your neighbors with training noise. Then fit a standard front sight that you have on your air rifle with our reduction set. You will get an almost inaudible shot and you can improve your shooting skills at home.The set contains all the necessary components and its assembly...

View

Rubber feet for bipod / tripod

Rubber feet for bipod / tripod 2

Weapon accessories

Rubber feet for bipod / tripod

The rubber feet are very precisely made and their construction is especially suitable for use on bipods or tripods. The body of the foot is made of a special polymer and is resistant to water, high temperatures, chemicals and normal mechanical damage. The M5 size screw is stainless steel made of high-quality A4/70 steel, which has increased resistance to...

View

Walther regulator pressure transducer

Walther regulator pressure transducer 2

Tuning

Walther regulator pressure transducer

Do you have a Walther LG 300 or Walther LG 400 air rifle and need to set the correct pressure on the regulator or check if your regulator is working properly?The device we manufacture for precise adjustment and pressure measurement will allow you to do so comfortably and quickly.The pressure transducer is universal for Walther LG 300 and Walther LG 400...

View

KeyMOD Modul for Tactical EVO TK3 bipod

KeyMOD Modul for Tactical EVO TK3 bipod 2

Spare parts and accessories

KeyMOD Modul for Tactical EVO TK3 and TK4 bipod

Spare Fastening Key MOD Modul for Bipod Tactical EVO TK3 and TK4. Modul is easily exchangeable and it allows quick „adjustment“ of Bipod on other fastening systems. Perfect workmanship.

View

M LOK Modul for Tactical EVO TK3 bipod

M LOK Modul for Tactical EVO TK3 bipod 2

Spare parts and accessories

M-LOK Modul for Tactical EVO TK3 and TK4 bipod

Spare Fastening M LOK Modul for Bipod Tactical EVO TK3 and TK4. Modul is easily exchangeable and it allows quick „adjustment“ of Bipod on other fastening systems. Perfect workmanship.

View

UIT Modul for Tactical EVO TK3 and TK4 bipod

UIT Modul for Tactical EVO TK3 and TK4 bipod 2

Spare parts and accessories

UIT Modul for Tactical EVO TK3 and TK4 bipod

Spare Fastening UIT Modul for Bipod Tactical EVO TK3 and TK4. Modul is easily exchangeable and it allows quick „adjustment“ of Bipod on other fastening systems. Perfect workmanship.

View

SPIGOT Modul for Tactical EVO TK3 bipod

SPIGOT Modul for Tactical EVO TK3 bipod 2

Spare parts and accessories

SPIGOT Modul for Tactical EVO TK3 and TK4 bipod

Spare Fastening SPIGOT Modul for Bipod Tactical EVO TK3 and TK4. Modul is easily exchangeable and it allows quick „adjustment“ of Bipod on other fastening systems. Perfect workmanship.

View

Walther LG 300 tension lever pin

Walther LG 300 tension lever pin 2

Tuning

Walther LG 300 tension lever pin

The Walther LG 300 air rifle has a relatively long tension lever, so if you fit it with a riflescope, you will encounter a problem that the original tension lever cannot be pulled. All that remains is to remove and shorten the tension lever. You can then fit it with a duralumin pin made by us. We supply the tensioning pin in silver or black.The set...

View

UIT Modul for Bipod F1

UIT Modul for Bipod F1 2

Spare parts and accessories

UIT Modul for Bipod F1

Spare Fastening UIT Modul for Bipod F-Class F1. Modul is easily exchangeable and it allows quick „adjustment“ of Bipod on other fastening systems.

View

WEAVER Modul for Bipod F1

Spare parts and accessories

WEAVER Modul for Bipod F1

Spare Fastening WEAVER Modul for Bipod F-Class F1. Modul is easily exchangeable and it allows quick „adjustment“ of Bipod on other fastening system.

View

WEAVER Modul for Bipod Tactical TK3

WEAVER Modul for Bipod Tactical TK3 2

Spare parts and accessories

WEAVER Modul for Bipod Tactical TK3, TK4 and PRS

Spare Fastening WEAVER Modul for Bipod Tactical Evo TK3, TK4 and PRS. Modul is easily exchangeable and it allows quick „adjustment“ of Bipod on other fastening systems.

View

ARCA Swiss Modul for Bipod Tactical TK3 and TK4

ARCA Swiss Modul for Bipod Tactical TK3 and TK4 2

Spare parts and accessories

ARCA Swiss Modul for Bipod Tactical TK3 and TK4

Spare Fastening ARCA Swiss Modul for Bipod Tactical Evo TK3 a TK4. Modul is easily exchangeable and it allows quick „adjustment“ of Bipod on other fastening systems.

View

ARCA Swiss Modul for Bipod PRS

ARCA Swiss Modul for Bipod PRS 2

Spare parts and accessories

ARCA Swiss Modul for Bipod PRS

Spare Fastening ARCA Swiss Modul for Bipod Tactical Evo PRS. Modul is easily exchangeable and it allows quick „adjustment“ of Bipod on other fastening systems.

View

ARCA Swiss Modul for Bipod F1

ARCA Swiss Modul for Bipod F1 2

Spare parts and accessories

ARCA Swiss Modul for Bipod F1

Spare Fastening ARCA Swiss Modul for Bipod F-Class F1. Modul is easily exchangeable and it allows quick „adjustment“ of Bipod on other fastening systems.

View

Tripod screw 1/4"

Tripod screw 1/4" 2

Weapon accessories

Tripod screw 1/4"

Tripod screw 1/4 " are used to attach the tripod weaver adapter, which we sell on this website.

View

ARCA Swiss Modul for Bipod ATLAS

ARCA Swiss Modul for Bipod ATLAS 2

New

Spare parts and accessories

ARCA Swiss Modul for Bipod ATLAS

Spare Fastening ARCA Swiss Modul for Bipod ATLAS. The module is easily swappable and allows a quick conversion of an ATLAS bipod to a new mounting system. It’s the ideal module for an ATLAS bipod if you want to replace the WEAVER interface with an ARCA-Swiss system.

View

Duralumin grips for CZ 75 and their clones

Duralumin grips for CZ 75 and their clones 2

Tuning

Duralumin grips for CZ 75 and their clones

High-quality and very precisely processed duralumin butts for CZ self-loading pistols. The grips are intended for all those who want to equip their weapon with something unconventional, exceptional and at the same time perfectly functional. Mounting the grips is very easy, so you're done in a few minutes. The screws are included in the package.

View

Tripod screw 3/8"

Tripod screw 3/8" 2

Weapon accessories

Tripod screw 3/8"

Tripod screw 3/8" are used to attach the tripod weaver adapter, which we sell on this website.

View

Return spring guide CZ 75 SP-01, Shadow, Tactical Sport

Tuning

Return spring guide CZ 75 SP-01, Shadow, Tactical Sport

Very high quality, refined and polished return spring guide. By using this guide you will achieve better weapon behavior. Made of high quality steel.

View

WEAVER LOCK Modul for Bipods F1 Class

WEAVER LOCK Modul for Bipods F1 Class 2

Spare parts and accessories

WEAVER LOCK Modul for Bipods F1 Class

Replacement WEAVER LOCK module for Tactical EVO F1 Class bipods. The module is easily replaceable and allows quick "disguise" of the bipod to another clamping system.This module is additionally equipped with a security lock system. The lock system was developed for those users who move when shooting and need to guarantee that their bipod will not come...

View

Mounting of the SHIELD SIGHTS SMS/RMS and RMSc COLLIMATOR...

Tuning

Mounting of the SHIELD SIGHTS SMS/RMS and RMSc COLLIMATOR for CZ 75 SP-01 Shadow, CZ...

The high-quality mount for the SHIELD SIGHTS SMS/RMS/RMSc collimator is very easy to replace with the original standard sights. No modifications to the weapon are required and the original sights can be reinstalled at any time. The mounting of the collimator sight is made of refined steel and will serve you 100% for decades.

View

WEAVER LOCK module for bipods TK3, TK4 and PRS

WEAVER LOCK module for bipods TK3, TK4 and PRS 2

Spare parts and accessories

WEAVER LOCK module for bipods TK3, TK4 and PRS

Replacement WEAVER LOCK module for Tactical EVO TK3, TK4 and PRS bipods. The module is easily replaceable and allows quick "disguise" of the bipod to another clamping system.This module is additionally equipped with a security lock system. The lock system was developed for those users who move when shooting and need to guarantee that their bipod will not...

View

Buttstock cover (genuine leather)

Buttstock cover (genuine leather) 2

Weapon accessories

Buttstock cover (genuine leather)

Additional cheekpiece for the stock. The cheekpiece is very well made, it is sewn from genuine leather and it can be easily and quickly attached to any classic stock. Attachment to the stock is done with Velcro. Variability is ensured by several foam pads, thanks to which you can easily achieve an additional increase of the cheek by approximately 20 mm...

View

Shooting bag for BAG PLATE (SLIM)

Shooting bag for BAG PLATE (SLIM) 2

Shooting bags, case, pads and accessories

Shooting bag for BAG PLATE (SLIM)

This shooting bag has been specifically designed for use with our PRS BAG PLATE system, but can also be used as a standard shooting bag.When used with the PRS BAG PLATE system it allows for easy, quick and efficient movement between shooting positions with the satchel. You get an extremely high quality assistant for dynamic shooting.

View

Mounting of SHIELD SIGHTS SMS/RMS and RMSc COLLIMATOR for...

Tuning

Mounting of SHIELD SIGHTS SMS/RMS and RMSc COLLIMATOR for GLOCK

The high-quality mount for the SHIELD SIGHTS SMS/RMS/RMSc collimator is very easy to replace with the original standard sights. No modifications to the weapon are required and the original sights can be reinstalled at any time. The assembly of the collimator sight is made of refined steel and will serve you 100% for decades.

View

Lock system for bipod Tactical EVO F1 Class

Spare parts and accessories

Lock system for bipod Tactical EVO F1 Class

Lock system for bipod Tactical EVO F1 Class. The lock system was developed for those users who move when shooting and need to guarantee that their bipod will not come loose, for example due to accidental catching behind a pontoon belt, clothing, etc.The lock system prevents proper opening, but it can be used to open (release - unlock) with one hand only...

View

Shooting bag for BAG PLATE (THICK)

Shooting bag for BAG PLATE (THICK) 2

Shooting bags, case, pads and accessories

Shooting bag for BAG PLATE (THICK)

This shooting bag has been specifically designed for use with our PRS BAG PLATE system, but can also be used as a standard shooting bag.When used with the PRS BAG PLATE system it allows for easy, quick and efficient movement between shooting positions with the satchel. You get an extremely high quality assistant for dynamic shooting.

View

Front sight CZ FO 1mm

Tuning

Front sight CZ FO 1mm

The CZ FO front sight with light-conducting fiber 1mm wide 3.3mm with a height of 5.75mm is suitable for a fixed sight for CZ P-07, CZ P-09, CZ P-10 C. It stands out for its highly precise processing and precise geometry. The viewing surface is roughened against unwanted glare.The front sight is suitable for CZ P-07, CZ P-09, CZ P-10 C pistols, where it...

View

1
2
3
4
…
6

Product added to wishlist

Product added to compare.