TACTICAL EVO - Hlavní strana

Showing 37-72 of 137 item(s)

Riflescope EO 4-16x44 AOEG

Riflescope EO 4-16x44 AOEG 2

Optics

Riflescope EO 4-16x44 AOEG

The high-quality and very durable 25.4mm (1") tube is made from a single piece of aviation duralumin, which is filled with nitrogen. Thanks to this, it has high mechanical resistance and does not fog. The lenses are coated with multi-layer anti-reflective protection, which guarantees a clean and clear image even behind poor lighting conditions.The...

View

Fuse cover for CZ SCORPION EVO 3

Fuse cover for CZ SCORPION EVO 3 2

Tuning

Safety cover for CZ SCORPION EVO 3

Safety cover for CZ SCORPION EVO 3.Are you not using the safety on the right or left side of the weapon? You can easily blind the unused side. Blinding an unused safety is very easy and you can handle it in a few seconds.

View

External WEAVER for mirage band

External WEAVER for mirage band 2

Weapon accessories

External WEAVER for mirage band

External WEAVER handle of lenta (mirage band - heat screen) for situations, when a rifle isn´t equipped with the handle in standard. Our handle is ready for installation on the weaver rail and it is suitable for any regular lenta (mirage band). Handle of lenta is easilly installed on weaver rail (approx. 10 sec.), light and made of quality aerial...

View

Riflescope CM 4-16x44 AOE

Riflescope CM 4-16x44 AOE 2

Optics

Riflescope CM 4-16x44 AOE

The high-quality and very durable 25.4mm (1") tube is made from a single piece of aviation duralumin, which is filled with nitrogen. Thanks to this, it has high mechanical resistance and does not fog. The lenses are coated with multi-layer anti-reflective protection, which guarantees a clean and clear image even behind The entire scope is made in a...

View

Insulation ring for CZ SCORPION EVO 3

Insulation ring for CZ SCORPION EVO 3 2

Tuning

Insulation ring for CZ SCORPION EVO 3

Insulation ring for CZ SCORPION EVO 3. The ring is made on CNC from a very high quality material AW 7075. The surface treatment is solved with black or red anodized.In the production documentation of CZ SCORPION EVO it is part no.5. The original part is made of plastic and after about 10,000 shots it breaks, thanks to which the forearm begins to move...

View

Mirage band elastic (thermal shield)

Mirage band elastic (thermal shield) 2

Weapon accessories

Mirage band elastic (thermal shield)

The (Lenta) mirage band is designed for all types of rifles and is made from a highly durable and elastic material designed to divert heat from the barrel to prevent negative thermal effects from the mirage. The mirage is a thermal phenomenon that causes optical illusion. The Lenta (mirage band - thermal shield) helps to eliminate this.

View

Tuning tension lever CZ SCORPION EVO 3

Tuning tension lever CZ SCORPION EVO 3 2

Tuning

Tuning charging handle CZ SCORPION EVO 3

Tuning charging handle for CZ SCORPION EVO 3. The charging handle is extended compared to the plastic original and its design corresponds to other tuning accessories for CZ SCORPION EVO 3, which we sell. Installing the charging handle is very easy, so you're done in minutes.The handle is made of high quality material AW 7075 and the surface treatment is...

View

Mirage band elastic (thermal shield)

Mirage band elastic (thermal shield) 2

Weapon accessories

Mirage band elastic (thermal shield)

The (Lenta) mirage band is designed for all types of rifles and is made from a highly durable and elastic material designed to divert heat from the barrel to prevent negative thermal effects from the mirage. The mirage is a thermal phenomenon that causes optical illusion. The Lenta (mirage band - thermal shield) helps to eliminate this.

View

Tunning trigger for CZ P-10 (red)

Tunning trigger for CZ P-10 (red) 2

Tuning

Tunning trigger for CZ P-10 (red)

Tuning trigger for CZ P-10 pistol. The trigger is made of high quality AW 7075 material and the surface treatment is solved with black or red anodized. Installation is easy, so you're done in minutes and your pistol gets an interesting design element.We recommend using it in combination with an extended magazine capture of a similar design.

View

Mirage band carrier (front and back part)

Mirage band carrier (front and back part) 2

Weapon accessories

Mirage band carrier (front and back part)

The set of lenta (mirage band) carriers. The set contains two parts of the carrier. The first one attaches to the front of the barrel and the second one attaches to the receiver. This is a spare part for lenta (mirage band), which we sell as a separate product on this website, but it can also be used as a proper base if you want to make a heat screen...

View

Weapon wiper for all calibers

Weapon wiper for all calibers 2

Weapon accessories

Weapon wiper for all calibers

View

Tunning trigger for CZ P-10 (black)

Tunning trigger for CZ P-10 (black) 2

Tuning

Tunning trigger for CZ P-10 (black)

Tuning trigger for CZ P-10 pistol. The trigger is made of high quality AW 7075 material and the surface treatment is solved with black or red anodized. Installation is easy, so you're done in minutes and your pistol gets an interesting design element.We recommend using it in combination with an extended magazine capture of a similar design.

View

Carbon rods for our LUXURY weapon wiper

Weapon accessories

Carbon rods for our LUXURY weapon wiper

Carbon rods for our LUXURY weapon wiper. We supply carbon rods in diameters of 4, 5, 6, 7, 8 and 10 mm and in lengths of 350, 450, 550, 650, 750, 850, 950 and 1050 mm. So all you need to clean your weapons is a handle, and you put carbon rods in it as you see fit. Replacing one rod with another does not take more than 1 second!The thread at the end of the...

View

Extended magazine catch CZ P-10

Extended magazine catch CZ P-10 2

Tuning

Extended magazine catch CZ P-10

Extended magazine catch CZ P-10. The catch is made of high quality AW 7075 material and the surface treatment is solved with black or red anodized. Installation is easy, so you are done in a few minutes and your pistol will get an interesting and above all functional design element.Designed for the version with a rotating catch. It doesn't work on the...

View

Stock screw SA 58 (vz 58, 585 and clones)

Stock screw SA 58 (vz 58, 585 and clones) 2

Tuning

Stock screw SA 58 (vz 58, 585 and clones)

Modernized version of the stock screw for SA 58 submachine gun (vz 58 and clones) on an Allen key. A big problem with the original screw, which has a classic "screw groove", is very complicated tightening or loosening of this screw. Either the screw cannot be tightened properly or, conversely, cannot be loosened. The stock screw we sell solves this...

View

Forehead breech for CZ P-10

Forehead breech for CZ P-10 2

Tuning

Forehead breech for CZ P-10

Dural breech for CZ P-10 pistol. Breech is made of high quality material AW 7075 and the surface treatment is solved with black or red anodized. Installation is easy, so you're done in minutes and your pistol gets a new and extraordinary dimension.It also works with the first generation pistol.

View

ARCA Swiss rail for M-LOK

ARCA Swiss rail for M-LOK 2

Weapon accessories

ARCA Swiss rail for M-LOK

The ARCA Swiss rail is a great addition to any rifle that has a chassis with an M-LOK clamping system. It can be used wherever the weapon uses a forend (chassis) with an M-LOK clamping system. A typical example is the weapons used for PRS shooting disciplines.This will give you a big advantage! You can easily move bipods or other accessories efficiently...

View

Trigger resistance spring CZ 557, 550 and 527

Tuning

Trigger resistance spring CZ 557, 550 and 527

Spring used to reduce the resistance of the trigger CZ 557, CZ 550, CZ 527 and increase its accuracy.Using the trigger spring, you can reduce the resistance of the trigger up to 0.5 kg.When the lowest trigger resistance is set, firing may occur when the weapon is unlocked! This fact must be taken into account! For the above reasons, we do not recommend...

View

CZ 457 trigger resistance springs

Tuning

CZ 457 trigger resistance springs

A set of springs used to reduce the resistance of the CZ 457 trigger and increase its accuracy.The set includes two springs, with the trigger spring reducing the factory resistance of the trigger by -50% and the impact spring, which has a 10% higher resistance. Using the trigger spring, you can reduce the trigger resistance to 0.5 kg.A stronger impact...

View

Trigger resistance spring TIKKA T3, T3x and T1x

Tuning

Trigger resistance spring TIKKA T3, T3x and T1x

Spring used to reduce the resistance of the trigger for TIKKA T3, T3x, T1x and increase its accuracy.Using the trigger spring, you can reduce the resistance of the trigger up to 0.5 kg. When the lowest trigger resistance is set, firing may occur when the weapon is unlocked! This fact must be taken into account! For the above reasons, we do not recommend...

View

Trigger resistance springs for CZ 455 / ZKM 452

Tuning

Trigger resistance springs for CZ 455 / ZKM 452

A set of springs used to reduce the resistance of the CZ 455 trigger from the factory 1.3 kg to 0.3 kg, according to your preferences. The strength of the trigger resistance is affected by more factors than just the force of the springs. Therefore, take the achievable resistance as a guide, it can vary by a few percent. The adjusting nuts on the spring...

View

Puškohled 8

Puškohled 8 2

Optics

Puškohled 8

View

Trigger resistance springs CZ P-10

Tuning

Trigger resistance springs CZ P-10

The set of springs is used to reduce the resistance of the trigger of the CZ P-10 pistol. Our set of springs is fully compatible with variants of pistols S, C, SC, F and contains two versions of the impact spring.One reduces the resistance of the trigger by 0.25 kg, the other by 0.5 kg, so it only depends on you which variant you choose.The springs are...

View

Bubble level 25,4mm (1") LIBELA

Bubble level 25,4mm (1") LIBELA 2

Weapon accessories

Bubble level 25,4mm (1")

The quality 25.4mm (1") spirit level has been tested by our competitive shooters. Its construction is designed to withstand the high-powered weapons you may encounter in hunting and sniper rifles. The mounting system is made of anodized aircraft grade aluminum 6065T.It is a quality spirit level for reasonable money!

View

SAKO 75, 85, 595 and 695 trigger resistance spring

Tuning

SAKO 75, 85, 595 and 695 trigger resistance spring

Spring used to reduce the resistance of the trigger SAKO 75, 85 595, 695 and increase its accuracy.Using the trigger spring, you can reduce the resistance of the trigger up to 0.5 kg.When the lowest trigger resistance is set, firing may occur when the weapon is unlocked! This fact must be taken into account! For the above reasons, we do not recommend...

View

Bubble level 30mm LIBELA

Bubble level 30mm LIBELA 2

Weapon accessories

Bubble level 30mm

The quality 30mm spirit level has been tested by our competitive shooters. Its construction is designed to withstand the high-powered weapons you may encounter in hunting and sniper rifles. The mounting system is made of anodized aircraft grade aluminum 6065T.It is a quality spirit level for reasonable money!

View

Trigger resistance springs for CZ SCORPION EVO

Tuning

Trigger resistance springs for CZ SCORPION EVO

A set of springs used to reduce the resistance of the trigger from the factory 5kg to 2.5kg. The CZ SCORPION EVO 3 weapon is designed from the ground up as a service weapon, and for this reason the resistance of the trigger and its characteristics are designed to maintain shooting safety even in crisis situations and shooting in gloves. During the...

View

Browning X-BOLT trigger resistance spring

Tuning

Browning X-BOLT trigger resistance spring

Spring used to reduce the resistance of the trigger Browning X-BOLT and increase its accuracy.Using the trigger spring, you can reduce the resistance of the trigger up to 0.5 kg.When the lowest trigger resistance is set, firing may occur when the weapon is unlocked! This fact must be taken into account! For the above reasons, we do not recommend setting...

View

Mounting two-piece 25.4mm (1 ") on 11mm rail - LOW

Mounting two-piece 25.4mm (1 ") on 11mm rail - LOW 2

Weapon accessories

Mounting two-piece 25.4mm (1 ") on 11mm rail - LOW

Two-piece LOW duralumin mounting is designed for riflescopes with a smaller objective, usually up to 40 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 25.4 mm (1 ") tube. The mounting is designed for an 11 mm rail.

View

Walther LG 300 / LG 400

Walther LG 300 / LG 400 2

Tuning

Walther steel cartridge plug

Spare part for WALTHER steel cartridges.Long-term use of some Walther steel cartridges wears out the thread on the cartridge. This is manifested mainly by the fact that there is a layer of small brass sawdust in the area of the pressure regulator.Over time, the thread on the cartridge becomes so worn that the thread does not withstand the air pressure...

View

Two-piece mounting 30mm on 11mm rail - LOW

Two-piece mounting 30mm on 11mm rail - LOW 2

Weapon accessories

Two-piece mounting 30mm on 11mm rail - LOW

Two-piece LOW duralumin mounting is designed for riflescopes with a smaller objective, usually up to 40 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 30mm tube. The mounting is designed for 11mm rail.

View

Filling PIN for WALTHER air rifles (universal)

Filling PIN for WALTHER air rifles (universal) 2

Tuning

Filling PIN for WALTHER air rifles (universal)

Universal filling PIN (valve) for WALTHER air rifles and pistols. The filling pin is designed for both types of cylinders, so it can be mounted on both 200 and 300 bar pressure bottles (bombs).

View

Enlargement of the Walther LG 300 pressure regulator chamber

Enlargement of the Walther LG 300 pressure regulator chamber 2

Tuning

Enlargement of the Walther LG 300 pressure regulator chamber

Ring for enlarging the chamber of the pressure regulator for the Walther LG 300 air rifle.The chamber of the standard pressure regulator of the PCP air rifle Walther LG 300 is designed for shooting with a power of 7.5J. With our rings, you can easily achieve an enlargement of the chamber and thus the possibility to set the power of the Walther LG 300 air...

View

Reduction for Walther LG 400

Reduction for Walther LG 400 2

Tuning

Reduction for Walther LG 400

By replacing the pressure regulator from the LG 400 with a pressure regulator from the LG 300, you will get much greater setting options and the excellent Walther LG 400 air rifle will thus enter a whole new dimension.In the Czech Republic, the limit for an air rifle is in category D (over-the-counter from the age of 18) to 16J. So why not make the most...

View

Silencer for Walther LG 300/400

Silencer for Walther LG 300/400 2

Tuning

Silencer for Walther LG 300/400

You have a Walther LG 300 or Walther LG 400 air rifle and you don't want to disturb your neighbors with training noise. Then fit a standard front sight that you have on your air rifle with our reduction set. You will get an almost inaudible shot and you can improve your shooting skills at home.The set contains all the necessary components and its assembly...

View

Walther regulator pressure transducer

Walther regulator pressure transducer 2

Tuning

Walther regulator pressure transducer

Do you have a Walther LG 300 or Walther LG 400 air rifle and need to set the correct pressure on the regulator or check if your regulator is working properly?The device we manufacture for precise adjustment and pressure measurement will allow you to do so comfortably and quickly.The pressure transducer is universal for Walther LG 300 and Walther LG 400...

View

1
2
3
4

Product added to wishlist

Product added to compare.