Tuning

It is obvious that manufacturers cannot incorporate all the tuning parts that customers want into their production programs. So in this section you will find tuning components that will help improve your beloved guns as you wish. At a basic level, we focus on products related to self-loading rifles SA 58 (vz 58, 585, etc.), repeating rifles CZ 457, CZ 455, CZ 557, Sig Sauer SSG 3000, semi auto CZ SCORPION EVO 3, CZ 9-10 and some others.

If you have a requirement for individual production of any interesting and meaningful accessory, do not hesitate to contact us.

You will not find a single part on our website that we would not personally try or were not 100% sure of. All our products are made of the best materials and with an absolute emphasis on quality! This way you can count on them to serve you well for many, many years.

Showing 1-19 of 19 item(s)

Browning X-BOLT trigger resistance spring

Tuning

Browning X-BOLT trigger resistance spring

Spring used to reduce the resistance of the trigger Browning X-BOLT and increase its accuracy.Using the trigger spring, you can reduce the resistance of the trigger up to 0.5 kg.When the lowest trigger resistance is set, firing may occur when the weapon is unlocked! This fact must be taken into account! For the above reasons, we do not recommend setting...

View

Walther LG 300 / LG 400

Walther LG 300 / LG 400 2

Tuning

Walther steel cartridge plug

Spare part for WALTHER steel cartridges.Long-term use of some Walther steel cartridges wears out the thread on the cartridge. This is manifested mainly by the fact that there is a layer of small brass sawdust in the area of the pressure regulator.Over time, the thread on the cartridge becomes so worn that the thread does not withstand the air pressure...

View

Weaver mounting on SA 58 (vz.58) with stock in IN-LINE...

Weaver mounting on SA 58 (vz.58) with stock in IN-LINE... 2

Submachine gun SA 58 (vz 58, 585 etc.)

Weaver mounting on SA 58 (vz.58) with stock in IN-LINE design

Weaver mounting on SA submachine gun vz. 58 is currently a necessary accessory for every shooter who is really serious about shooting from this iconic Czechoslovak self-loading assault rifle. Submachine gun vz. 58 was a great weapon for its time and for its design qualities it serves in the armed forces to this day. As for its popularity among civilian...

View

Alignment Adapter for SA 58 (vz.58)

Alignment Adapter for SA 58 (vz.58) 2

Submachine gun SA 58 (vz 58, 585 etc.)

Alignment Adapter for SA 58 (vz.58)

The vz. 58 submachine gun was an excellent weapon for its time, and due to its design qualities, it is still in use by armed forces today. As for its popularity among civilian shooters, there's no need to elaborate extensively—nearly everyone knows it. Given its year of origin, the biggest design drawbacks of this weapon are the inability to mount optics...

View

Filling PIN for WALTHER air rifles (universal)

Filling PIN for WALTHER air rifles (universal) 2

Tuning

Filling PIN for WALTHER air rifles (universal)

Universal filling PIN (valve) for WALTHER air rifles and pistols. The filling pin is designed for both types of cylinders, so it can be mounted on both 200 and 300 bar pressure bottles (bombs).

View

Adjustable RECOIL PAD (universal)

Adjustable RECOIL PAD (universal) 2

Weapon accessories

Adjustable RECOIL PAD (universal)

The universal adjustable recoil pad mechanism is designed for all types of stocks. The adjustable mechanism of the recoil pad was developed with regard to the needs of shooters to easily and quickly change its settings.It is possible to use practically any rubber recoil pad that suits you on our height and length adjustable mechanics, or you can buy ATI...

View

Enlargement of the Walther LG 300 pressure regulator chamber

Enlargement of the Walther LG 300 pressure regulator chamber 2

Tuning

Enlargement of the Walther LG 300 pressure regulator chamber

Ring for enlarging the chamber of the pressure regulator for the Walther LG 300 air rifle.The chamber of the standard pressure regulator of the PCP air rifle Walther LG 300 is designed for shooting with a power of 7.5J. With our rings, you can easily achieve an enlargement of the chamber and thus the possibility to set the power of the Walther LG 300 air...

View

IN-LINE Buttstock reduction for SA vz.58

IN-LINE Buttstock reduction for SA vz.58 2

Submachine gun SA 58 (vz 58, 585 etc.)

IN-LINE Buttstock reduction for SA vz.58

Weaver mounting buttstock reduction system for SA vz. 58 and its clones. This reduction is designed specifically to use with our product: Weaver mount for SA vz. 58 and will allow you to quickly change the lock system of your buttstock. Available variants are mounting locks for FAB Defense, AR-style buffer, Zhukov Yugo style, or the original wooden and...

View

Buttstock cover (genuine leather)

Buttstock cover (genuine leather) 2

Weapon accessories

Buttstock cover (genuine leather)

Additional cheekpiece for the stock. The cheekpiece is very well made, it is sewn from genuine leather and it can be easily and quickly attached to any classic stock. Attachment to the stock is done with Velcro. Variability is ensured by several foam pads, thanks to which you can easily achieve an additional increase of the cheek by approximately 20 mm...

View

Carbon rods for our LUXURY weapon wiper

Weapon accessories

Carbon rods for our LUXURY weapon wiper

Carbon rods for our LUXURY weapon wiper. We supply carbon rods in diameters of 4, 5, 6, 7, 8 and 10 mm and in lengths of 350, 450, 550, 650, 750, 850, 950 and 1050 mm. So all you need to clean your weapons is a handle, and you put carbon rods in it as you see fit. Replacing one rod with another does not take more than 1 second!The thread at the end of the...

View

Weapon wiper for all calibers

Weapon wiper for all calibers 2

Weapon accessories

Weapon wiper for all calibers

View

Reduction for Walther LG 400

Reduction for Walther LG 400 2

Tuning

Reduction for Walther LG 400

By replacing the pressure regulator from the LG 400 with a pressure regulator from the LG 300, you will get much greater setting options and the excellent Walther LG 400 air rifle will thus enter a whole new dimension.In the Czech Republic, the limit for an air rifle is in category D (over-the-counter from the age of 18) to 16J. So why not make the most...

View

Stock screw SA 58 (vz 58, 585 and clones)

Stock screw SA 58 (vz 58, 585 and clones) 2

Tuning

Stock screw SA 58 (vz 58, 585 and clones)

Modernized version of the stock screw for SA 58 submachine gun (vz 58 and clones) on an Allen key. A big problem with the original screw, which has a classic "screw groove", is very complicated tightening or loosening of this screw. Either the screw cannot be tightened properly or, conversely, cannot be loosened. The stock screw we sell solves this...

View

High-Quality Oil Not Only for Firearms: Interflon Fin Super Dry Lube

High-Quality Oil Not Only for Firearms: Interflon Fin Super Dry Lube 2

New

Weapon accessories

High-Quality Oil Not Only for Firearms: Interflon Fin Super Dry Lube

Multi-purpose oil not only for firearms, which cleans, lubricates, preserves, and protects against oxidation.Lubricating oil with MicPol® sliding particles that provides high penetration for long-lasting lubrication. This is a high-quality multi-purpose oil for firearms, ammunition, and equipment that cleans, lubricates, preserves, and protects against...

View

Silencer for Walther LG 300/400

Silencer for Walther LG 300/400 2

Tuning

Silencer for Walther LG 300/400

You have a Walther LG 300 or Walther LG 400 air rifle and you don't want to disturb your neighbors with training noise. Then fit a standard front sight that you have on your air rifle with our reduction set. You will get an almost inaudible shot and you can improve your shooting skills at home.The set contains all the necessary components and its assembly...

View

Weight 170g with MLOK Mounting System

Weight 170g with MLOK Mounting System 2

Tuning

Weight 170g with MLOK Mounting System

This 170g weight is designed for attachment to any stock equipped with the MLOK mounting system (e.g., MDT stock). Available in various colors, there's an option for everyone.

View

Walther regulator pressure transducer

Walther regulator pressure transducer 2

Tuning

Walther regulator pressure transducer

Do you have a Walther LG 300 or Walther LG 400 air rifle and need to set the correct pressure on the regulator or check if your regulator is working properly?The device we manufacture for precise adjustment and pressure measurement will allow you to do so comfortably and quickly.The pressure transducer is universal for Walther LG 300 and Walther LG 400...

View

Weight 280g with MLOK Mounting System

Weight 280g with MLOK Mounting System 2

Tuning

Weight 280g with MLOK Mounting System

This 280g weight is designed for attachment to any stock equipped with the MLOK mounting system (e.g., MDT stock). Available in various colors, there's an option for everyone.

View

Walther LG 300 tension lever pin

Walther LG 300 tension lever pin 2

Tuning

Walther LG 300 tension lever pin

The Walther LG 300 air rifle has a relatively long tension lever, so if you fit it with a riflescope, you will encounter a problem that the original tension lever cannot be pulled. All that remains is to remove and shorten the tension lever. You can then fit it with a duralumin pin made by us. We supply the tensioning pin in silver or black.The set...

View

Product added to wishlist

Product added to compare.