Weapon accessories

Pomůcek pro střelce a lovce je po celém světě vyráběno nepřeberné množství. Možná si tak kladete otázku proč kupovat právě výrobky TACTICAL EVO...?

Snad vás přesvědčí, že my sami jsme nejen aktivními sportovními střelci, ale také myslivci. Všechny naše výrobky jsou důkladně testovány a vyráběny s ohledem na reálné potřeby nás střelců.

Na našich stránkách nenajdete jediný produkt, který bychom osobně nevyzkoušeli nebo si jím nebyli 100% jisti. Všechny naše produkty jsou vyráběny z těch nejlepších materiálů a s absolutním důrazem na kvalitu! Vy se tak můžete spolehnout na to, že vám budou dobře sloužit mnoho a mnoho let.

Vzduchovkářům pak můžeme doporučit naše partnerské weby zabývající se doplňky pro vzduchovkové střelce JSB diabolo a Air Chrony, výrobce předních balistických chronografů.

Showing 1-12 of 20 item(s)

Weaver mounting on SA 58 (vz.58) with stock in IN-LINE...

Weaver mounting on SA 58 (vz.58) with stock in IN-LINE... 2

Submachine gun SA 58 (vz 58, 585 etc.)

Weaver mounting on SA 58 (vz.58) with stock in IN-LINE design

Weaver mounting on SA submachine gun vz. 58 is currently a necessary accessory for every shooter who is really serious about shooting from this iconic Czechoslovak self-loading assault rifle. Submachine gun vz. 58 was a great weapon for its time and for its design qualities it serves in the armed forces to this day. As for its popularity among civilian...

View

IN-LINE Buttstock reduction for SA vz.58

IN-LINE Buttstock reduction for SA vz.58 2

Submachine gun SA 58 (vz 58, 585 etc.)

IN-LINE Buttstock reduction for SA vz.58

Weaver mounting buttstock reduction system for SA vz. 58 and its clones. This reduction is designed specifically to use with our product: Weaver mount for SA vz. 58 and will allow you to quickly change the lock system of your buttstock. Available variants are mounting locks for FAB Defense, AR-style buffer, Zhukov Yugo style, or the original wooden and...

View

Mounting for Pulsar (Trail, Digisight, Apex, Sightline)

Mounting for Pulsar (Trail, Digisight, Apex, Sightline) 2

Weapon accessories

Mounting for Pulsar (Trail, Digisight, Apex, Sightline)

In our own hunting practice, we have often encountered complicated removability of thermal imaging and night vision of the Pulsar (Digisight, Apex, Trail, Sightline) brands. The device itself works in most cases for the benefit of every hunter and they are very popular among them, but factory-supplied mountings are no longer so popular. For this reason,...

View

Dope Card HOLDER

Dope Card HOLDER 2

Weapon accessories

Dope Card HOLDER

A card for rapid fire, or if you prefer a PULL, is a great tool for any shooter of the Long Rande or PRS tactical disciplines. You can easily and quickly write a note on it that you need for shooting (number of clicks on the scope, wind drift, etc.) and you can just as easily exchange the puller for another one.The set contains three pieces of plastic...

View

Bubble level 30mm LIBELA

Bubble level 30mm LIBELA 2

Weapon accessories

Bubble level 30mm

The quality 30mm spirit level has been tested by our competitive shooters. Its construction is designed to withstand the high-powered weapons you may encounter in hunting and sniper rifles. The mounting system is made of anodized aircraft grade aluminum 6065T.It is a quality spirit level for reasonable money!

View

Bubble level 25,4mm (1") LIBELA

Bubble level 25,4mm (1") LIBELA 2

Weapon accessories

Bubble level 25,4mm (1")

The quality 25.4mm (1") spirit level has been tested by our competitive shooters. Its construction is designed to withstand the high-powered weapons you may encounter in hunting and sniper rifles. The mounting system is made of anodized aircraft grade aluminum 6065T.It is a quality spirit level for reasonable money!

View

Mounting two-piece 25.4mm (1 ") on 11mm rail - LOW

Mounting two-piece 25.4mm (1 ") on 11mm rail - LOW 2

Weapon accessories

Mounting two-piece 25.4mm (1 ") on 11mm rail - LOW

Two-piece LOW duralumin mounting is designed for riflescopes with a smaller objective, usually up to 40 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 25.4 mm (1 ") tube. The mounting is designed for an 11 mm rail.

View

Two-piece mounting 30mm on 11mm rail - LOW

Two-piece mounting 30mm on 11mm rail - LOW 2

Weapon accessories

Two-piece mounting 30mm on 11mm rail - LOW

Two-piece LOW duralumin mounting is designed for riflescopes with a smaller objective, usually up to 40 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 30mm tube. The mounting is designed for 11mm rail.

View

Mounting two-piece 25.4mm (1 ") on 11mm rail - HIGH

Weapon accessories

Mounting two-piece 25.4mm (1 ") on 11mm rail - HIGH

Two-piece HIGH duralumin mounting is designed for riflescopes with a larger objective, usually up to 60 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 25.4mm (1") tube. The mounting is designed for an 11 mm rail.

View

Mounting on weaver (picatinny) rail 30mm - LOW

Mounting on weaver (picatinny) rail 30mm - LOW 2

Weapon accessories

Mounting on weaver (picatinny) rail 30mm - LOW

Two-piece LOW duralumin mounting is designed for riflescopes with a smaller objective, usually up to 40 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 30mm tube. The mounting is designed for weaver (picatinny) rail.

View

Mounting on weaver (picatinny) rail 30mm - HIGH

Mounting on weaver (picatinny) rail 30mm - HIGH 2

Weapon accessories

Mounting on weaver (picatinny) rail 30mm - HIGH

Two-piece LOW duralumin mounting is designed for riflescopes with a smaller objective, usually up to 40 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 30mm tube. The mounting is designed for 11mm rail.

View

Mounting two-piece 25.4mm (1") on weaver (picatinny) - HIGH

Weapon accessories

Mounting two-piece 25.4mm (1") on weaver (picatinny) - HIGH

Two-piece HIGH duralumin mounting is designed for riflescopes with a larger objective, usually up to 60 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 25.4mm (1") tube. The mounting is designed for weaver (picatinny) rail.

View

1
2

Product added to wishlist

Product added to compare.