Weapon accessories

Pomůcek pro střelce a lovce je po celém světě vyráběno nepřeberné množství. Možná si tak kladete otázku proč kupovat právě výrobky TACTICAL EVO...?

Snad vás přesvědčí, že my sami jsme nejen aktivními sportovními střelci, ale také myslivci. Všechny naše výrobky jsou důkladně testovány a vyráběny s ohledem na reálné potřeby nás střelců.

Na našich stránkách nenajdete jediný produkt, který bychom osobně nevyzkoušeli nebo si jím nebyli 100% jisti. Všechny naše produkty jsou vyráběny z těch nejlepších materiálů a s absolutním důrazem na kvalitu! Vy se tak můžete spolehnout na to, že vám budou dobře sloužit mnoho a mnoho let.

Vzduchovkářům pak můžeme doporučit naše partnerské weby zabývající se doplňky pro vzduchovkové střelce JSB diabolo a Air Chrony, výrobce předních balistických chronografů.

Showing 1-28 of 28 item(s)

Weaver mounting on SA 58 (vz.58) with stock in IN-LINE...

Weaver mounting on SA 58 (vz.58) with stock in IN-LINE... 2

Submachine gun SA 58 (vz 58, 585 etc.)

Weaver mounting on SA 58 (vz.58) with stock in IN-LINE design

Weaver mounting on SA submachine gun vz. 58 is currently a necessary accessory for every shooter who is really serious about shooting from this iconic Czechoslovak self-loading assault rifle. Submachine gun vz. 58 was a great weapon for its time and for its design qualities it serves in the armed forces to this day. As for its popularity among civilian...

View

IN-LINE Buttstock reduction for SA vz.58

IN-LINE Buttstock reduction for SA vz.58 2

Submachine gun SA 58 (vz 58, 585 etc.)

IN-LINE Buttstock reduction for SA vz.58

Weaver mounting buttstock reduction system for SA vz. 58 and its clones. This reduction is designed specifically to use with our product: Weaver mount for SA vz. 58 and will allow you to quickly change the lock system of your buttstock. Available variants are mounting locks for FAB Defense, AR-style buffer, Zhukov Yugo style, or the original wooden and...

View

Dope Card HOLDER

Dope Card HOLDER 2

Weapon accessories

Dope Card HOLDER

A card for rapid fire, or if you prefer a PULL, is a great tool for any shooter of the Long Rande or PRS tactical disciplines. You can easily and quickly write a note on it that you need for shooting (number of clicks on the scope, wind drift, etc.) and you can just as easily exchange the puller for another one.The set contains three pieces of plastic...

View

Bubble level 30mm LIBELA

Bubble level 30mm LIBELA 2

Weapon accessories

Bubble level 30mm

The quality 30mm spirit level has been tested by our competitive shooters. Its construction is designed to withstand the high-powered weapons you may encounter in hunting and sniper rifles. The mounting system is made of anodized aircraft grade aluminum 6065T.It is a quality spirit level for reasonable money!

View

Bubble level 25,4mm (1") LIBELA

Bubble level 25,4mm (1") LIBELA 2

Weapon accessories

Bubble level 25,4mm (1")

The quality 25.4mm (1") spirit level has been tested by our competitive shooters. Its construction is designed to withstand the high-powered weapons you may encounter in hunting and sniper rifles. The mounting system is made of anodized aircraft grade aluminum 6065T.It is a quality spirit level for reasonable money!

View

Mounting two-piece 25.4mm (1 ") on 11mm rail - LOW

Mounting two-piece 25.4mm (1 ") on 11mm rail - LOW 2

Weapon accessories

Mounting two-piece 25.4mm (1 ") on 11mm rail - LOW

Two-piece LOW duralumin mounting is designed for riflescopes with a smaller objective, usually up to 40 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 25.4 mm (1 ") tube. The mounting is designed for an 11 mm rail.

View

Connection with external thread M10x1

Filling and air conditioning

Connection with external thread M10x1

Adapter used for fast and high quality connection. The adapter has external threads M10x1.

View

Two-piece mounting 30mm on 11mm rail - LOW

Two-piece mounting 30mm on 11mm rail - LOW 2

Weapon accessories

Two-piece mounting 30mm on 11mm rail - LOW

Two-piece LOW duralumin mounting is designed for riflescopes with a smaller objective, usually up to 40 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 30mm tube. The mounting is designed for 11mm rail.

View

Quick coupling for PCP guns 1/8" BSP (G1/8)

Quick coupling for PCP guns 1/8" BSP (G1/8) 2

Filling and air conditioning

Quick coupling for PCP guns 1/8" BSP (G1/8)

Quick coupling for filling air PCP guns with 1/8" BSP female thread.

View

Quick coupling for PCP guns M10x1

Quick coupling for PCP guns M10x1 2

Filling and air conditioning

Quick coupling for PCP guns M10x1

Quick coupling for filling air PCP guns with M10x1 female thread.

View

Hosepipe with drain valve and quick coupling

Hosepipe with drain valve and quick coupling 2

Filling and air conditioning

Hosepipe with drain valve and quick coupling

Filling hose (quickfill) with quick coupling and valve for releasing air pressure.This is the cheapest possible solution for filling PCP air guns from a pressure bottle. The filling hose is provided on one side with a G 5/8 thread, which is a common pressure bottle valve (200/300 bar) and on the other side with a quick coupling. The total length of the...

View

Filling system with pressure gauge

Filling system with pressure gauge 2

Filling and air conditioning

Filling system with pressure gauge, valve and quick coupling

Filling hose (quickfill) with manometer, quick coupling and valve for releasing air pressure.This is a very comfortable solution for filling PCP air guns from a pressure bottle.The filling hose is 500 mm long, on one side equipped with a G5/8 thread (standard pressure bottle valve 200/300 bar) and on the other side with a quick coupling. The whole system...

View

Multifunctional filling system with pressure gauge, valve...

Multifunctional filling system with pressure gauge, valve... 2

Filling and air conditioning

Multifunctional filling system with pressure gauge, valve and quick coupling

Filling hose (quickfill) with manometer, quick coupling and valve for releasing air pressure.This is a very comfortable solution for filling PCP airguns from a pressure bottle.The filling hosepipe is 500 mm long, on one side equipped with a G5/8 thread (standard pressure bottle valve 200/300 bar) and on the other side with a quick coupling. The whole...

View

Air filter for filling 300bar

Air filter for filling 300bar 2

Filling and air conditioning

Air filter for filling 300bar

Why use an air filter to fill pressure bottles or cartridges?When working with compressed air, water condensation occurs, which can get into the pressure bottles or cartridges of air (PCP) rifles if the compressor is of poor quality. This condensed water causes corrosion in the pressure bottles, which significantly reduces their service life and at the...

View

In-line Air filter for filling

In-line Air filter for filling 2

Filling and air conditioning

In-line Air filter for filling

Why use an air filter for filling pressure bottles or cartridges?When working with compressed air, water condensation occurs, which can get into the bottles or cartridges of air (PCP) rifles if the compressor is of poor quality. This condensed water causes corrosion in the pressure bottles, which significantly reduces their service life and at the same...

View

Mounting two-piece 25.4mm (1 ") on 11mm rail - HIGH

Weapon accessories

Mounting two-piece 25.4mm (1 ") on 11mm rail - HIGH

Two-piece HIGH duralumin mounting is designed for riflescopes with a larger objective, usually up to 60 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 25.4mm (1") tube. The mounting is designed for an 11 mm rail.

View

Mounting on weaver (picatinny) rail 30mm - LOW

Mounting on weaver (picatinny) rail 30mm - LOW 2

Weapon accessories

Mounting on weaver (picatinny) rail 30mm - LOW

Two-piece LOW duralumin mounting is designed for riflescopes with a smaller objective, usually up to 40 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 30mm tube. The mounting is designed for weaver (picatinny) rail.

View

Male quick coupling with non-return valve

Male quick coupling with non-return valve 2

Filling and air conditioning

Male quick coupling with non-return valve

Male quick coupling with check valve (1/8" BSP (G1/8) thread)

View

Mounting on weaver (picatinny) rail 30mm - HIGH

Mounting on weaver (picatinny) rail 30mm - HIGH 2

Weapon accessories

Mounting on weaver (picatinny) rail 30mm - HIGH

Two-piece LOW duralumin mounting is designed for riflescopes with a smaller objective, usually up to 40 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 30mm tube. The mounting is designed for 11mm rail.

View

Mounting two-piece 25.4mm (1") on weaver (picatinny) - HIGH

Weapon accessories

Mounting two-piece 25.4mm (1") on weaver (picatinny) - HIGH

Two-piece HIGH duralumin mounting is designed for riflescopes with a larger objective, usually up to 60 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 25.4mm (1") tube. The mounting is designed for weaver (picatinny) rail.

View

Two-piece mounting 30mm on 11mm rail - HIGH

Two-piece mounting 30mm on 11mm rail - HIGH 2

Weapon accessories

Two-piece mounting 30mm on 11mm rail - HIGH

Two-piece HIGH duralumin mounting is designed for riflescopes with a smaller objective, usually up to 40 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 30mm tube. The mounting is designed for 11mm rail.

View

One-piece mounting on weaver (picatinny) rail 30mm and 25,4m(1") with BUBBLE LEVEL

One-piece mounting on weaver (picatinny) rail 30mm and 25,4m(1") with BUBBLE LEVEL 2

Weapon accessories

One-piece mounting on weaver (picatinny) rail 30mm and 25,4m(1") with BUBBLE LEVEL

The one-piece duralumin mount with integrated bubble level is designed for riflescopes with lenses, usually up to 60 mm. Mounting is by means of screws on the right part of the mount. This mount is suitable for mounting rifle scopes or any other device with both 30mm and 25,4mm (1") tube (for smaller rifle scopes, defining links are included). The mount...

View

One-piece mounting 30mm / 25,4mm(1") on 11mm rail with BUBBLE LEVEL

One-piece mounting 30mm / 25,4mm(1") on 11mm rail with BUBBLE LEVEL 2

Weapon accessories

One-piece mounting 30mm / 25,4mm(1") on 11mm rail with BUBBLE LEVEL

The one-piece duralumin mount with integrated bubble level is designed for riflescopes with lenses, usually up to 60 mm. Mounting is by means of screws on the right part of the mount. This mount is suitable for mounting rifle scopes or any other device with both 30mm and 25,4mm (1") tube (for smaller rifle scopes, defining links are included). The mount...

View

Mount SPRINGER RECOIL PROTECTOR on 11mm rail 30mm/25,4m

Mount SPRINGER RECOIL PROTECTOR on 11mm rail 30mm/25,4m 2

New

Weapon accessories

Mount SPRINGER RECOIL PROTECTOR on 11mm rail 30mm/25,4m

MOUNT SPRINGER RECOIL PROTECTOR 11mm The one-piece duralumin mount with integrated base is designed for riflescopes with lenses, usually up to 60 mm. The mounting is by means of screws on the right part of the mount. This mount is suitable for mounting rifle scopes or any other device with both 30mm and 25,4mm tubes (for smaller rifle scopes, defining...

View

One-piece mounting on weaver (picatinny) rail 30mm/25,4mm(1") with SLIDE

One-piece mounting on weaver (picatinny) rail 30mm/25,4mm(1") with SLIDE 2

Weapon accessories

One-piece mounting on weaver (picatinny) rail 30mm/25,4mm(1") with SLIDE

The one-piece duralumin mount with integrated base is designed for riflescopes with lenses, usually up to 60 mm. The mounting is by means of screws on the right part of the mount. This mount is suitable for mounting rifle scopes or any other device with both 30mm and 25,4mm tubes (for smaller rifle scopes, defining links are included). THIS MOUNT IS...

View

Mounting on weaver (picatinny) rail 34mm

Mounting on weaver (picatinny) rail 34mm 2

Weapon accessories

Mounting on weaver (picatinny) rail 34mm

Two-piece duralumin mounting is designed for riflescopes with objective, usually up to 60 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 34mm tube. The mounting is designed for weaver (picatinny) rail.

View

Mounting two-piece 25.4mm (1") on weaver (picatinny) - LOW

Mounting two-piece 25.4mm (1") on weaver (picatinny) - LOW 2

Weapon accessories

Mounting two-piece 25.4mm (1") on weaver (picatinny) - LOW

The two-piece LOW duralumin mount is designed for riflescopes with a smaller objective lens, usually up to 40 mm. Mounting is by screws on each part. This mount is suitable for mounting a rifle scope or any other device with a 25.4 mm (1") tube. The mounting is designed for weaver (picatinny) rail.

View

Mounting two-piece 30mm on 11mm rail - LOW

Mounting two-piece 30mm on 11mm rail - LOW 2

Weapon accessories

Mounting two-piece 30mm on 11mm rail - LOW

Two-piece LOW duralumin mounting is designed for riflescopes with a smaller objective, usually up to 50 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 30mm. The mounting is designed for an 11 mm rail.

View

Product added to wishlist

Product added to compare.