Weapon accessories

Showing 49-72 of 80 item(s)

Outdoor tactical pad EXTREME

Outdoor tactical pad EXTREME 2

Weapon accessories

Outdoor tactical pad EXTREME

The EXTREME outdoor tactical pad has been manufactured continuously since 2014, is made of highly durable materials and has been tested by dozens of tourists, sport shooters and soldiers.The bottom layer is rubberised to protect against moisture in the wet or snow. The inner layer is made of plastic foam for comfort when lying on a rocky surface. The top...

View

Vegetation attachment system

Vegetation attachment system 2

Tactical clothing and equipment

Vegetation attachment system

Rubber with a plastic clip for additional attachment of vegetation is an easy, fast and proven way to attach vegetation or any other small object to clothing. It is a proven and long-term used tool. This tool works very comfortably and quickly in any situation. The total length of the rubber is 21 cm, diameter 4 mm and is available in green (khaki).

View

Dope Card HOLDER

Dope Card HOLDER 2

Weapon accessories

Dope Card HOLDER

A card for rapid fire, or if you prefer a PULL, is a great tool for any shooter of the Long Rande or PRS tactical disciplines. You can easily and quickly write a note on it that you need for shooting (number of clicks on the scope, wind drift, etc.) and you can just as easily exchange the puller for another one.The set contains three pieces of plastic...

View

Rifle tunnel carrier with flap

Rifle tunnel carrier with flap 2

Optics

Rifle tunnel carrier with flap

Rifle tunnel carrier with flap for biathlon shooters. Easily and universally implementable carrier is designed for biathlon rifles with a main diameter of 22 mm. The carrier and the carrier flap are made of solid material (high quality dural AW 6082 T6) on CNC machines and the surface treatment is solved with black anodizing.Perfect workshop processing....

View

Weapon wiper for all calibers

Weapon wiper for all calibers 2

Weapon accessories

Weapon wiper for all calibers

View

Carbon rods for our LUXURY weapon wiper

Weapon accessories

Carbon rods for our LUXURY weapon wiper

Carbon rods for our LUXURY weapon wiper. We supply carbon rods in diameters of 4, 5, 6, 7, 8 and 10 mm and in lengths of 350, 450, 550, 650, 750, 850, 950 and 1050 mm. So all you need to clean your weapons is a handle, and you put carbon rods in it as you see fit. Replacing one rod with another does not take more than 1 second!The thread at the end of the...

View

Mounting two-piece 25.4mm (1 ") on 11mm rail - HIGH

Weapon accessories

Mounting two-piece 25.4mm (1 ") on 11mm rail - HIGH

Two-piece HIGH duralumin mounting is designed for riflescopes with a larger objective, usually up to 60 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 25.4mm (1") tube. The mounting is designed for an 11 mm rail.

View

Connection with external thread M10x1

Filling and air conditioning

Connection with external thread M10x1

Adapter used for fast and high quality connection. The adapter has external threads M10x1.

View

Quick coupling for PCP guns 1/8" BSP (G1/8)

Quick coupling for PCP guns 1/8" BSP (G1/8) 2

Filling and air conditioning

Quick coupling for PCP guns 1/8" BSP (G1/8)

Quick coupling for filling air PCP guns with 1/8" BSP female thread.

View

Quick coupling for PCP guns M10x1

Quick coupling for PCP guns M10x1 2

Filling and air conditioning

Quick coupling for PCP guns M10x1

Quick coupling for filling air PCP guns with M10x1 female thread.

View

Hosepipe with drain valve and quick coupling

Hosepipe with drain valve and quick coupling 2

Filling and air conditioning

Hosepipe with drain valve and quick coupling

Filling hose (quickfill) with quick coupling and valve for releasing air pressure.This is the cheapest possible solution for filling PCP air guns from a pressure bottle. The filling hose is provided on one side with a G 5/8 thread, which is a common pressure bottle valve (200/300 bar) and on the other side with a quick coupling. The total length of the...

View

Filling system with pressure gauge

Filling system with pressure gauge 2

Filling and air conditioning

Filling system with pressure gauge, valve and quick coupling

Filling hose (quickfill) with manometer, quick coupling and valve for releasing air pressure.This is a very comfortable solution for filling PCP air guns from a pressure bottle.The filling hose is 500 mm long, on one side equipped with a G5/8 thread (standard pressure bottle valve 200/300 bar) and on the other side with a quick coupling. The whole system...

View

Multifunctional filling system with pressure gauge, valve...

Multifunctional filling system with pressure gauge, valve... 2

Filling and air conditioning

Multifunctional filling system with pressure gauge, valve and quick coupling

Filling hose (quickfill) with manometer, quick coupling and valve for releasing air pressure.This is a very comfortable solution for filling PCP airguns from a pressure bottle.The filling hosepipe is 500 mm long, on one side equipped with a G5/8 thread (standard pressure bottle valve 200/300 bar) and on the other side with a quick coupling. The whole...

View

Air filter for filling 300bar

Air filter for filling 300bar 2

Filling and air conditioning

Air filter for filling 300bar

Why use an air filter to fill pressure bottles or cartridges?When working with compressed air, water condensation occurs, which can get into the pressure bottles or cartridges of air (PCP) rifles if the compressor is of poor quality. This condensed water causes corrosion in the pressure bottles, which significantly reduces their service life and at the...

View

In-line Air filter for filling

In-line Air filter for filling 2

Filling and air conditioning

In-line Air filter for filling

Why use an air filter for filling pressure bottles or cartridges?When working with compressed air, water condensation occurs, which can get into the bottles or cartridges of air (PCP) rifles if the compressor is of poor quality. This condensed water causes corrosion in the pressure bottles, which significantly reduces their service life and at the same...

View

Male quick coupling with non-return valve

Male quick coupling with non-return valve 2

Filling and air conditioning

Male quick coupling with non-return valve

Male quick coupling with check valve (1/8" BSP (G1/8) thread)

View

Waterproof Notebook JASE

Waterproof Notebook JASE 2

Practical accessories

Waterproof Notebook JASE

Pocket-sized waterproof notebook in green design. This notebook features a spiral binding that ensures maximum clarity of your notes. Its dark green cover is ideal for natural environments where white paper could reveal your position. The notebook contains 48 sheets of anti-reflective, waterproof green all-weather paper with horizontal lines. Thanks to...

View

Weight 170g with MLOK Mounting System

Weight 170g with MLOK Mounting System 2

Tuning

Weight 170g with MLOK Mounting System

This 170g weight is designed for attachment to any stock equipped with the MLOK mounting system (e.g., MDT stock). Available in various colors, there's an option for everyone.

View

Weight 280g with MLOK Mounting System

Weight 280g with MLOK Mounting System 2

Tuning

Weight 280g with MLOK Mounting System

This 280g weight is designed for attachment to any stock equipped with the MLOK mounting system (e.g., MDT stock). Available in various colors, there's an option for everyone.

View

Mounting on weaver (picatinny) rail 30mm - LOW

Mounting on weaver (picatinny) rail 30mm - LOW 2

Weapon accessories

Mounting on weaver (picatinny) rail 30mm - LOW

Two-piece LOW duralumin mounting is designed for riflescopes with a smaller objective, usually up to 40 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 30mm tube. The mounting is designed for weaver (picatinny) rail.

View

Mounting on weaver (picatinny) rail 30mm - HIGH

Mounting on weaver (picatinny) rail 30mm - HIGH 2

Weapon accessories

Mounting on weaver (picatinny) rail 30mm - HIGH

Two-piece LOW duralumin mounting is designed for riflescopes with a smaller objective, usually up to 40 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 30mm tube. The mounting is designed for 11mm rail.

View

Mounting two-piece 25.4mm (1") on weaver (picatinny) - HIGH

Weapon accessories

Mounting two-piece 25.4mm (1") on weaver (picatinny) - HIGH

Two-piece HIGH duralumin mounting is designed for riflescopes with a larger objective, usually up to 60 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 25.4mm (1") tube. The mounting is designed for weaver (picatinny) rail.

View

Two-piece mounting 30mm on 11mm rail - HIGH

Two-piece mounting 30mm on 11mm rail - HIGH 2

Weapon accessories

Two-piece mounting 30mm on 11mm rail - HIGH

Two-piece HIGH duralumin mounting is designed for riflescopes with a smaller objective, usually up to 40 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 30mm tube. The mounting is designed for 11mm rail.

View

One-piece mounting on weaver (picatinny) rail 30mm and 25,4m(1") with BUBBLE LEVEL

One-piece mounting on weaver (picatinny) rail 30mm and 25,4m(1") with BUBBLE LEVEL 2

Weapon accessories

One-piece mounting on weaver (picatinny) rail 30mm and 25,4m(1") with BUBBLE LEVEL

The one-piece duralumin mount with integrated bubble level is designed for riflescopes with lenses, usually up to 60 mm. Mounting is by means of screws on the right part of the mount. This mount is suitable for mounting rifle scopes or any other device with both 30mm and 25,4mm (1") tube (for smaller rifle scopes, defining links are included). The mount...

View

1
2
3
4

Product added to wishlist

Product added to compare.