TACTICAL EVO - Hlavní strana

Showing 97-108 of 116 item(s)

Filling system with pressure gauge

Filling system with pressure gauge 2

Filling and air conditioning

Filling system with pressure gauge, valve and quick coupling

Filling hose (quickfill) with manometer, quick coupling and valve for releasing air pressure.This is a very comfortable solution for filling PCP air guns from a pressure bottle.The filling hose is 500 mm long, on one side equipped with a G5/8 thread (standard pressure bottle valve 200/300 bar) and on the other side with a quick coupling. The whole system...

View

Multifunctional filling system with pressure gauge, valve...

Multifunctional filling system with pressure gauge, valve... 2

Filling and air conditioning

Multifunctional filling system with pressure gauge, valve and quick coupling

Filling hose (quickfill) with manometer, quick coupling and valve for releasing air pressure.This is a very comfortable solution for filling PCP airguns from a pressure bottle.The filling hosepipe is 500 mm long, on one side equipped with a G5/8 thread (standard pressure bottle valve 200/300 bar) and on the other side with a quick coupling. The whole...

View

Air filter for filling 300bar

Air filter for filling 300bar 2

Filling and air conditioning

Air filter for filling 300bar

Why use an air filter to fill pressure bottles or cartridges?When working with compressed air, water condensation occurs, which can get into the pressure bottles or cartridges of air (PCP) rifles if the compressor is of poor quality. This condensed water causes corrosion in the pressure bottles, which significantly reduces their service life and at the...

View

In-line Air filter for filling

In-line Air filter for filling 2

Filling and air conditioning

In-line Air filter for filling

Why use an air filter for filling pressure bottles or cartridges?When working with compressed air, water condensation occurs, which can get into the bottles or cartridges of air (PCP) rifles if the compressor is of poor quality. This condensed water causes corrosion in the pressure bottles, which significantly reduces their service life and at the same...

View

Male quick coupling with non-return valve

Male quick coupling with non-return valve 2

Filling and air conditioning

Male quick coupling with non-return valve

Male quick coupling with check valve (1/8" BSP (G1/8) thread)

View

Waterproof Notebook JASE

Waterproof Notebook JASE 2

Practical accessories

Waterproof Notebook JASE

Pocket-sized waterproof notebook in green design. This notebook features a spiral binding that ensures maximum clarity of your notes. Its dark green cover is ideal for natural environments where white paper could reveal your position. The notebook contains 48 sheets of anti-reflective, waterproof green all-weather paper with horizontal lines. Thanks to...

View

Weight 170g with MLOK Mounting System

Weight 170g with MLOK Mounting System 2

Tuning

Weight 170g with MLOK Mounting System

This 170g weight is designed for attachment to any stock equipped with the MLOK mounting system (e.g., MDT stock). Available in various colors, there's an option for everyone.

View

Weight 280g with MLOK Mounting System

Weight 280g with MLOK Mounting System 2

Tuning

Weight 280g with MLOK Mounting System

This 280g weight is designed for attachment to any stock equipped with the MLOK mounting system (e.g., MDT stock). Available in various colors, there's an option for everyone.

View

Mounting on weaver (picatinny) rail 30mm - LOW

Mounting on weaver (picatinny) rail 30mm - LOW 2

New

Weapon accessories

Mounting on weaver (picatinny) rail 30mm - LOW

Two-piece LOW duralumin mounting is designed for riflescopes with a smaller objective, usually up to 40 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 30mm tube. The mounting is designed for weaver (picatinny) rail.

View

Mounting on weaver (picatinny) rail 30mm - HIGH

Mounting on weaver (picatinny) rail 30mm - HIGH 2

New

Weapon accessories

Mounting on weaver (picatinny) rail 30mm - HIGH

Two-piece LOW duralumin mounting is designed for riflescopes with a smaller objective, usually up to 40 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 30mm tube. The mounting is designed for 11mm rail.

View

Mounting two-piece 25.4mm (1") on weaver (picatinny) - HIGH

New

Weapon accessories

Mounting two-piece 25.4mm (1") on weaver (picatinny) - HIGH

Two-piece HIGH duralumin mounting is designed for riflescopes with a larger objective, usually up to 60 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 25.4mm (1") tube. The mounting is designed for weaver (picatinny) rail.

View

Two-piece mounting 30mm on 11mm rail - HIGH

Two-piece mounting 30mm on 11mm rail - HIGH 2

New

Weapon accessories

Two-piece mounting 30mm on 11mm rail - HIGH

Two-piece HIGH duralumin mounting is designed for riflescopes with a smaller objective, usually up to 40 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 30mm tube. The mounting is designed for 11mm rail.

View

1
…
8
9
10

Product added to wishlist

Product added to compare.