TACTICAL EVO - Hlavní strana

Showing 85-96 of 212 item(s)

Bubble level 25,4mm (1") LIBELA

Bubble level 25,4mm (1") LIBELA 2

Weapon accessories

Bubble level 25,4mm (1")

The quality 25.4mm (1") spirit level has been tested by our competitive shooters. Its construction is designed to withstand the high-powered weapons you may encounter in hunting and sniper rifles. The mounting system is made of anodized aircraft grade aluminum 6065T.It is a quality spirit level for reasonable money!

View

Filling PIN for WALTHER air rifles (universal)

Filling PIN for WALTHER air rifles (universal) 2

Tuning

Filling PIN for WALTHER air rifles (universal)

Universal filling PIN (valve) for WALTHER air rifles and pistols. The filling pin is designed for both types of cylinders, so it can be mounted on both 200 and 300 bar pressure bottles (bombs).

View

Mounting two-piece 25.4mm (1 ") on 11mm rail - LOW

Mounting two-piece 25.4mm (1 ") on 11mm rail - LOW 2

Weapon accessories

Mounting two-piece 25.4mm (1 ") on 11mm rail - LOW

Two-piece LOW duralumin mounting is designed for riflescopes with a smaller objective, usually up to 40 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 25.4 mm (1 ") tube. The mounting is designed for an 11 mm rail.

View

Joint with bearing for bipod TK3 and PRS

Joint with bearing for bipod TK3 and PRS 2

Spare parts and accessories

Joint with bearing for bipod TK3, TK4 and PRS

Spare part for bipod Tactical EVO model TK3, TK4 and PRS - joint with bearing. This spare part allows you to retrofit your Tactical Evo TK3 or PRS bipod with new functionality.This consists in the fact that you can tilt the bipod to the side just by pressing on the bipod. You can easily adjust the pressure required for tilting with the locking handle. In...

View

Enlargement of the Walther LG 300 pressure regulator chamber

Enlargement of the Walther LG 300 pressure regulator chamber 2

Tuning

Enlargement of the Walther LG 300 pressure regulator chamber

Ring for enlarging the chamber of the pressure regulator for the Walther LG 300 air rifle.The chamber of the standard pressure regulator of the PCP air rifle Walther LG 300 is designed for shooting with a power of 7.5J. With our rings, you can easily achieve an enlargement of the chamber and thus the possibility to set the power of the Walther LG 300 air...

View

Two-piece mounting 30mm on 11mm rail - LOW

Two-piece mounting 30mm on 11mm rail - LOW 2

Weapon accessories

Two-piece mounting 30mm on 11mm rail - LOW

Two-piece LOW duralumin mounting is designed for riflescopes with a smaller objective, usually up to 40 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 30mm tube. The mounting is designed for 11mm rail.

View

Spare bearing for bipod TK3, TK4 and PRS

Spare bearing for bipod TK3, TK4 and PRS 2

Spare parts and accessories

Spare bearing for bipod TK3, TK4 and PRS

Replacement joint bearing of the Tactical EVO bipod model TK3, TK4 and PRS.

View

Reduction for Walther LG 400

Reduction for Walther LG 400 2

Tuning

Reduction for Walther LG 400

By replacing the pressure regulator from the LG 400 with a pressure regulator from the LG 300, you will get much greater setting options and the excellent Walther LG 400 air rifle will thus enter a whole new dimension.In the Czech Republic, the limit for an air rifle is in category D (over-the-counter from the age of 18) to 16J. So why not make the most...

View

Silencer for Walther LG 300/400

Silencer for Walther LG 300/400 2

Tuning

Silencer for Walther LG 300/400

You have a Walther LG 300 or Walther LG 400 air rifle and you don't want to disturb your neighbors with training noise. Then fit a standard front sight that you have on your air rifle with our reduction set. You will get an almost inaudible shot and you can improve your shooting skills at home.The set contains all the necessary components and its assembly...

View

Rubber feet for bipod / tripod

Rubber feet for bipod / tripod 2

Weapon accessories

Rubber feet for bipod / tripod

The rubber feet are very precisely made and their construction is especially suitable for use on bipods or tripods. The body of the foot is made of a special polymer and is resistant to water, high temperatures, chemicals and normal mechanical damage. The M5 size screw is stainless steel made of high-quality A4/70 steel, which has increased resistance to...

View

Walther regulator pressure transducer

Walther regulator pressure transducer 2

Tuning

Walther regulator pressure transducer

Do you have a Walther LG 300 or Walther LG 400 air rifle and need to set the correct pressure on the regulator or check if your regulator is working properly?The device we manufacture for precise adjustment and pressure measurement will allow you to do so comfortably and quickly.The pressure transducer is universal for Walther LG 300 and Walther LG 400...

View

KeyMOD Modul for Tactical EVO TK3 bipod

KeyMOD Modul for Tactical EVO TK3 bipod 2

Spare parts and accessories

KeyMOD Modul for Tactical EVO TK3 and TK4 bipod

Spare Fastening Key MOD Modul for Bipod Tactical EVO TK3 and TK4. Modul is easily exchangeable and it allows quick „adjustment“ of Bipod on other fastening systems. Perfect workmanship.

View

1
…
7
8
9
…
18

Product added to wishlist

Product added to compare.