TACTICAL EVO - Hlavní strana

Showing 81-120 of 210 item(s)

Fast Ammo 2 pin

Fast Ammo 2 pin 2

Weapon accessories

Fast Ammo 2 pin

Fast Ammo 2 is an easy way to refill your capacity and also to quickly reload your weapon. The tactical accessory is easy to install with a Velcro fastener. Fast Ammo 2 is designed for ammo from .223 through .308 to .338 calibre.

View

Fast Ammo 3 pin

Fast Ammo 3 pin 2

Weapon accessories

Fast Ammo 3 pin

Fast Ammo 3 is your easy way to refill capacity and also to quickly reload your weapon. The tactical accessory is easy to install via the Velcro fastener, which is included in the delivery and can also be ordered separately. The Fast Ammo 3 is designed for 3 extra ammo (from .223 through .308 to .338 calibre)

View

Ammo Kit including 20 pin panel

Ammo Kit including 20 pin panel 2

Weapon accessories

Ammo Kit including 20 pin panel

Ammo Kit is a complete set with 20-pin panel. This kit is your easy way to increase the ammunition carried while maintaining maximum storage and protection of the ammunition from external influences.Ammo Tactical 20 cartridge panel included! Of course, the whole set is cheaper than if you bought it separately.

View

Ammo Kit including 10 pin panel

Ammo Kit including 10 pin panel 2

Weapon accessories

Ammo Kit including 10 pin panel

Ammo Kit is a complete set with 10-pin panel. This kit is your easy way to increase the ammunition carried while maintaining maximum storage and protection of the ammunition from external influences.Ammo Tactical 10 cartridge panel included! Of course, the whole set is cheaper than if you bought it separately.

View

Trigger resistance spring CZ 557, 550 and 527

Tuning

Trigger resistance spring CZ 557, 550 and 527

Spring used to reduce the resistance of the trigger CZ 557, CZ 550, CZ 527 and increase its accuracy.Using the trigger spring, you can reduce the resistance of the trigger up to 0.5 kg.When the lowest trigger resistance is set, firing may occur when the weapon is unlocked! This fact must be taken into account! For the above reasons, we do not recommend...

View

Ammo Tactical Panel (20 pieces)

Ammo Tactical Panel (20 pieces) 2

Weapon accessories

Ammo Tactical Panel (20 pieces)

The Ammo Tactical 20 panel is an easy way of increasing the amount of ammunition carried while maintaining maximum ammunition storage and protection from external influences. The Ammo Tactical 20 is designed for 20 pieces of .223 through .308 to .338 calibre and great emphasis was placed on the production quality and therefore the product’s resistance to...

View

CZ 457 trigger resistance springs

Tuning

CZ 457 trigger resistance springs

A set of springs used to reduce the resistance of the CZ 457 trigger and increase its accuracy.The set includes two springs, with the trigger spring reducing the factory resistance of the trigger by -50% and the impact spring, which has a 10% higher resistance. Using the trigger spring, you can reduce the trigger resistance to 0.5 kg.A stronger impact...

View

Panel Ammo Tactical (10 pieces)

Panel Ammo Tactical (10 pieces) 2

Weapon accessories

Panel Ammo Tactical (10 pieces)

The Ammo Tactical 10 panel is an easy way of increasing the amount of ammunition carried while maintaining maximum ammunition storage and protection from external influences. The Ammo Tactical 10 panel is designed for 10 pieces from .223 through .308 to .338 calibres and when it was produced, great emphasis was put on the production quality and therefore...

View

Trigger resistance spring TIKKA T3, T3x and T1x

Tuning

Trigger resistance spring TIKKA T3, T3x and T1x

Spring used to reduce the resistance of the trigger for TIKKA T3, T3x, T1x and increase its accuracy.Using the trigger spring, you can reduce the resistance of the trigger up to 0.5 kg. When the lowest trigger resistance is set, firing may occur when the weapon is unlocked! This fact must be taken into account! For the above reasons, we do not recommend...

View

Ammo Cover (20-10)

Ammo Cover (20-10) 2

Weapon accessories

Ammo Cover (20-10)

The Ammo Cover (20-10) is very high quality processed and designed to be fitted with Ammo Tactical 20 and Ammo Tactical 10 hubs. The Tactical Ammo Cover is an easy way of increasing the ammunition you’re able to carry while maintaining maximum storage and protection of ammunition from external effects. During production, great emphasis was placed on the...

View

Trigger resistance springs for CZ 455 / ZKM 452

Tuning

Trigger resistance springs for CZ 455 / ZKM 452

A set of springs used to reduce the resistance of the CZ 455 trigger from the factory 1.3 kg to 0.3 kg, according to your preferences. The strength of the trigger resistance is affected by more factors than just the force of the springs. Therefore, take the achievable resistance as a guide, it can vary by a few percent. The adjusting nuts on the spring...

View

Shooting pad

Shooting pad 2

Weapon accessories

Shooting pad

Original shooting pad made from highly durable materials. Indispensable equipment not only for outdoor shooters. The bottom layer is rubberised, a plastic foam filling, a top layer of Cordura. The front part has a practical folding window with a transparent foil for the placement of ballistic tables and other aids. Quality pad for greater comfort in...

View

Puškohled 8

Puškohled 8 2

Optics

Puškohled 8

View

Trigger resistance springs CZ P-10

Tuning

Trigger resistance springs CZ P-10

The set of springs is used to reduce the resistance of the trigger of the CZ P-10 pistol. Our set of springs is fully compatible with variants of pistols S, C, SC, F and contains two versions of the impact spring.One reduces the resistance of the trigger by 0.25 kg, the other by 0.5 kg, so it only depends on you which variant you choose.The springs are...

View

Outdoor tactical pad EXTREME

Outdoor tactical pad EXTREME 2

Weapon accessories

Outdoor tactical pad EXTREME

The EXTREME outdoor tactical pad has been manufactured continuously since 2014, is made of highly durable materials and has been tested by dozens of tourists, sport shooters and soldiers.The bottom layer is rubberised to protect against moisture in the wet or snow. The inner layer is made of plastic foam for comfort when lying on a rocky surface. The top...

View

Bubble level 25,4mm (1") LIBELA

Bubble level 25,4mm (1") LIBELA 2

Weapon accessories

Bubble level 25,4mm (1")

The quality 25.4mm (1") spirit level has been tested by our competitive shooters. Its construction is designed to withstand the high-powered weapons you may encounter in hunting and sniper rifles. The mounting system is made of anodized aircraft grade aluminum 6065T.It is a quality spirit level for reasonable money!

View

SAKO 75, 85, 595 and 695 trigger resistance spring

Tuning

SAKO 75, 85, 595 and 695 trigger resistance spring

Spring used to reduce the resistance of the trigger SAKO 75, 85 595, 695 and increase its accuracy.Using the trigger spring, you can reduce the resistance of the trigger up to 0.5 kg.When the lowest trigger resistance is set, firing may occur when the weapon is unlocked! This fact must be taken into account! For the above reasons, we do not recommend...

View

Bubble level 30mm LIBELA

Bubble level 30mm LIBELA 2

Weapon accessories

Bubble level 30mm

The quality 30mm spirit level has been tested by our competitive shooters. Its construction is designed to withstand the high-powered weapons you may encounter in hunting and sniper rifles. The mounting system is made of anodized aircraft grade aluminum 6065T.It is a quality spirit level for reasonable money!

View

Trigger resistance springs for CZ SCORPION EVO

Tuning

Trigger resistance springs for CZ SCORPION EVO

A set of springs used to reduce the resistance of the trigger from the factory 5kg to 2.5kg. The CZ SCORPION EVO 3 weapon is designed from the ground up as a service weapon, and for this reason the resistance of the trigger and its characteristics are designed to maintain shooting safety even in crisis situations and shooting in gloves. During the...

View

Buttstock cover (genuine leather)

Buttstock cover (genuine leather) 2

Weapon accessories

Buttstock cover (genuine leather)

Additional cheekpiece for the stock. The cheekpiece is very well made, it is sewn from genuine leather and it can be easily and quickly attached to any classic stock. Attachment to the stock is done with Velcro. Variability is ensured by several foam pads, thanks to which you can easily achieve an additional increase of the cheek by approximately 20 mm...

View

Browning X-BOLT trigger resistance spring

Tuning

Browning X-BOLT trigger resistance spring

Spring used to reduce the resistance of the trigger Browning X-BOLT and increase its accuracy.Using the trigger spring, you can reduce the resistance of the trigger up to 0.5 kg.When the lowest trigger resistance is set, firing may occur when the weapon is unlocked! This fact must be taken into account! For the above reasons, we do not recommend setting...

View

Anti-slip rubbers for bipod

Spare parts and accessories

Anti-slip rubbers for bipod Tactical Evo TK3 and TK4

Anti-slip rubbers are designed for bipod Tactical Evo TK3 (TK4) and are very easy and fast to stick. The rubber is made of 2mm thick self-adhesive rubber in the form of a bipod Tactical Evo TK3 (TK4) support rail and is not compatible with other rails.

View

HARD support rail for TK3 and TK4 bipod

HARD support rail for TK3 and TK4 bipod 2

Spare parts and accessories

HARD support rail for TK3 and TK4 bipod

The HARD support rail (designed for hard surfaces such as concrete and ice) is primarily intended for hard surfaces, but it also performs very well on other surfaces (mud, soil, etc.). The rail is easily replaceable and allows for quick modification of the support system.

View

Mounting two-piece 25.4mm (1 ") on 11mm rail - LOW

Mounting two-piece 25.4mm (1 ") on 11mm rail - LOW 2

Weapon accessories

Mounting two-piece 25.4mm (1 ") on 11mm rail - LOW

Two-piece LOW duralumin mounting is designed for riflescopes with a smaller objective, usually up to 40 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 25.4 mm (1 ") tube. The mounting is designed for an 11 mm rail.

View

Walther LG 300 / LG 400

Walther LG 300 / LG 400 2

Tuning

Walther steel cartridge plug

Spare part for WALTHER steel cartridges.Long-term use of some Walther steel cartridges wears out the thread on the cartridge. This is manifested mainly by the fact that there is a layer of small brass sawdust in the area of the pressure regulator.Over time, the thread on the cartridge becomes so worn that the thread does not withstand the air pressure...

View

T-shirt Tactical EVO (black and khaki green)

T-shirt Tactical EVO (black and khaki green) 2

Tactical clothing and equipment

T-shirt Tactical EVO (black and khaki green)

Very high quality and durable Tactical EVO t-shirt in sizes XS, S, M, L, XL and two possible colors (black, dark green). The T-shirt is made of high-quality materials that do not irritate the skin and are very pleasant to touch and wear.Thanks to the structure of the knitting and the special shape of the fiber, it wicks away sweat perfectly, which in...

View

Joint with bearing for bipod TK3 and TK4

Joint with bearing for bipod TK3 and TK4 2

Spare parts and accessories

Joint with bearing for bipod TK3 and TK4

Replacement Part for Tactical EVO Bipod Models TK3 and TK4 - Joint with Bearing and Weaver Rail. The joint with a bearing allows for perfect locking of the bipod, while also offering the ability to adjust the lever so that the lock can be smoothly overridden. The pressure required for tilting can be easily adjusted using the locking lever. Additionally,...

View

Two-piece mounting 30mm on 11mm rail - LOW

Two-piece mounting 30mm on 11mm rail - LOW 2

Weapon accessories

Two-piece mounting 30mm on 11mm rail - LOW

Two-piece LOW duralumin mounting is designed for riflescopes with a smaller objective, usually up to 40 mm. The attachment is by means of a screw on each part. This mount is suitable for mounting a riflescope or any other device with a 30mm tube. The mounting is designed for 11mm rail.

View

Filling PIN for WALTHER air rifles (universal)

Filling PIN for WALTHER air rifles (universal) 2

Tuning

Filling PIN for WALTHER air rifles (universal)

Universal filling PIN (valve) for WALTHER air rifles and pistols. The filling pin is designed for both types of cylinders, so it can be mounted on both 200 and 300 bar pressure bottles (bombs).

View

T-shirt Tactical EVO (black and sand)

T-shirt Tactical EVO (black and sand) 2

Tactical clothing and equipment

T-shirt Tactical EVO (black and sand)

Tactical EVO T-shirt in sizes S, M, L, XL and two possible colors (black, sand). The T-shirt is made of quality materials that do not irritate the skin and is very pleasant to the touch and wear.The T-shirt is universal for both women and men and will also serve as a gift 100%.

View

Joint with bearing for bipod TK3 and PRS

Joint with bearing for bipod TK3 and PRS 2

Spare parts and accessories

Joint with bearing for bipod TK3, TK4 and PRS

Spare part for bipod Tactical EVO model TK3, TK4 and PRS - joint with bearing. This spare part allows you to retrofit your Tactical Evo TK3 or PRS bipod with new functionality.This consists in the fact that you can tilt the bipod to the side just by pressing on the bipod. You can easily adjust the pressure required for tilting with the locking handle. In...

View

Enlargement of the Walther LG 300 pressure regulator chamber

Enlargement of the Walther LG 300 pressure regulator chamber 2

Tuning

Enlargement of the Walther LG 300 pressure regulator chamber

Ring for enlarging the chamber of the pressure regulator for the Walther LG 300 air rifle.The chamber of the standard pressure regulator of the PCP air rifle Walther LG 300 is designed for shooting with a power of 7.5J. With our rings, you can easily achieve an enlargement of the chamber and thus the possibility to set the power of the Walther LG 300 air...

View

Vegetation attachment system

Vegetation attachment system 2

Tactical clothing and equipment

Vegetation attachment system

Rubber with a plastic clip for additional attachment of vegetation is an easy, fast and proven way to attach vegetation or any other small object to clothing. It is a proven and long-term used tool. This tool works very comfortably and quickly in any situation. The total length of the rubber is 21 cm, diameter 4 mm and is available in green (khaki).

View

CARBON PLASTER Tecasorb (first aid)

CARBON PLASTER Tecasorb (first aid) 2

Practical accessories

CARBON PLASTER Tecasorb (first aid)

Tecasorb are absorbent covering nano dressings or plasters with a carbon layer, made from active carbon textile. Tecasorb is easy to use and supports faster healing. It is durable and has lasting absorbent properties. For significantly infected wounds, the dressing should be changed every 6-12 hours at the beginning. After improvement, the optimal...

View

Spare bearing for bipod TK3, TK4 and PRS

Spare bearing for bipod TK3, TK4 and PRS 2

Spare parts and accessories

Spare bearing for bipod TK3, TK4 and PRS

Replacement joint bearing of the Tactical EVO bipod model TK3, TK4 and PRS.

View

Reduction for Walther LG 400

Reduction for Walther LG 400 2

Tuning

Reduction for Walther LG 400

By replacing the pressure regulator from the LG 400 with a pressure regulator from the LG 300, you will get much greater setting options and the excellent Walther LG 400 air rifle will thus enter a whole new dimension.In the Czech Republic, the limit for an air rifle is in category D (over-the-counter from the age of 18) to 16J. So why not make the most...

View

CARBON NANO DRESSING Tecasorb (first aid)

CARBON NANO DRESSING Tecasorb (first aid) 2

Practical accessories

CARBON NANO DRESSING Tecasorb (first aid)

Tecasorb consists of absorbent covering nano dressings or plasters with a carbon layer, made from active carbon textile. Tecasorb is easy to use and supports faster healing. It is durable and has lasting absorbent properties. In cases of significantly infected wounds, the dressing should be changed every 6-12 hours initially. After improvement, the...

View

Silencer for Walther LG 300/400

Silencer for Walther LG 300/400 2

Tuning

Silencer for Walther LG 300/400

You have a Walther LG 300 or Walther LG 400 air rifle and you don't want to disturb your neighbors with training noise. Then fit a standard front sight that you have on your air rifle with our reduction set. You will get an almost inaudible shot and you can improve your shooting skills at home.The set contains all the necessary components and its assembly...

View

Rubber feet for bipod / tripod

Rubber feet for bipod / tripod 2

Weapon accessories

Rubber feet for bipod / tripod

The rubber feet are very precisely made and their construction is especially suitable for use on bipods or tripods. The body of the foot is made of a special polymer and is resistant to water, high temperatures, chemicals and normal mechanical damage. The M5 size screw is stainless steel made of high-quality A4/70 steel, which has increased resistance to...

View

Walther regulator pressure transducer

Walther regulator pressure transducer 2

Tuning

Walther regulator pressure transducer

Do you have a Walther LG 300 or Walther LG 400 air rifle and need to set the correct pressure on the regulator or check if your regulator is working properly?The device we manufacture for precise adjustment and pressure measurement will allow you to do so comfortably and quickly.The pressure transducer is universal for Walther LG 300 and Walther LG 400...

View

1
2
3
4
…
6

Product added to wishlist

Product added to compare.