TACTICAL EVO - Hlavní strana

Showing 49-60 of 127 item(s)

Trigger resistance springs CZ P-10

Tuning

Trigger resistance springs CZ P-10

The set of springs is used to reduce the resistance of the trigger of the CZ P-10 pistol. Our set of springs is fully compatible with variants of pistols S, C, SC, F and contains two versions of the impact spring.One reduces the resistance of the trigger by 0.25 kg, the other by 0.5 kg, so it only depends on you which variant you choose.The springs are...

View

SAKO 75, 85, 595 and 695 trigger resistance spring

Tuning

SAKO 75, 85, 595 and 695 trigger resistance spring

Spring used to reduce the resistance of the trigger SAKO 75, 85 595, 695 and increase its accuracy.Using the trigger spring, you can reduce the resistance of the trigger up to 0.5 kg.When the lowest trigger resistance is set, firing may occur when the weapon is unlocked! This fact must be taken into account! For the above reasons, we do not recommend...

View

Trigger resistance springs for CZ SCORPION EVO

Tuning

Trigger resistance springs for CZ SCORPION EVO

A set of springs used to reduce the resistance of the trigger from the factory 5kg to 2.5kg. The CZ SCORPION EVO 3 weapon is designed from the ground up as a service weapon, and for this reason the resistance of the trigger and its characteristics are designed to maintain shooting safety even in crisis situations and shooting in gloves. During the...

View

Browning X-BOLT trigger resistance spring

Tuning

Browning X-BOLT trigger resistance spring

Spring used to reduce the resistance of the trigger Browning X-BOLT and increase its accuracy.Using the trigger spring, you can reduce the resistance of the trigger up to 0.5 kg.When the lowest trigger resistance is set, firing may occur when the weapon is unlocked! This fact must be taken into account! For the above reasons, we do not recommend setting...

View

Anti-slip rubbers for bipod

Spare parts and accessories

Anti-slip rubbers for bipod Tactical Evo TK3 and TK4

Anti-slip rubbers are designed for bipod Tactical Evo TK3 (TK4) and are very easy and fast to stick. The rubber is made of 2mm thick self-adhesive rubber in the form of a bipod Tactical Evo TK3 (TK4) support rail and is not compatible with other rails.

View

HARD support rail for TK3 and TK4 bipod

HARD support rail for TK3 and TK4 bipod 2

Spare parts and accessories

HARD support rail for TK3 and TK4 bipod

The HARD support rail (designed for hard surfaces such as concrete and ice) is primarily intended for hard surfaces, but it also performs very well on other surfaces (mud, soil, etc.). The rail is easily replaceable and allows for quick modification of the support system.

View

Walther LG 300 / LG 400

Walther LG 300 / LG 400 2

Tuning

Walther steel cartridge plug

Spare part for WALTHER steel cartridges.Long-term use of some Walther steel cartridges wears out the thread on the cartridge. This is manifested mainly by the fact that there is a layer of small brass sawdust in the area of the pressure regulator.Over time, the thread on the cartridge becomes so worn that the thread does not withstand the air pressure...

View

Joint with bearing for bipod TK3 and TK4

Joint with bearing for bipod TK3 and TK4 2

Spare parts and accessories

Joint with bearing for bipod TK3 and TK4

Replacement Part for Tactical EVO Bipod Models TK3 and TK4 - Joint with Bearing and Weaver Rail. The joint with a bearing allows for perfect locking of the bipod, while also offering the ability to adjust the lever so that the lock can be smoothly overridden. The pressure required for tilting can be easily adjusted using the locking lever. Additionally,...

View

Filling PIN for WALTHER air rifles (universal)

Filling PIN for WALTHER air rifles (universal) 2

Tuning

Filling PIN for WALTHER air rifles (universal)

Universal filling PIN (valve) for WALTHER air rifles and pistols. The filling pin is designed for both types of cylinders, so it can be mounted on both 200 and 300 bar pressure bottles (bombs).

View

Joint with bearing for bipod TK3 and PRS

Joint with bearing for bipod TK3 and PRS 2

Spare parts and accessories

Joint with bearing for bipod TK3, TK4 and PRS

Spare part for bipod Tactical EVO model TK3, TK4 and PRS - joint with bearing. This spare part allows you to retrofit your Tactical Evo TK3 or PRS bipod with new functionality.This consists in the fact that you can tilt the bipod to the side just by pressing on the bipod. You can easily adjust the pressure required for tilting with the locking handle. In...

View

Enlargement of the Walther LG 300 pressure regulator chamber

Enlargement of the Walther LG 300 pressure regulator chamber 2

Tuning

Enlargement of the Walther LG 300 pressure regulator chamber

Ring for enlarging the chamber of the pressure regulator for the Walther LG 300 air rifle.The chamber of the standard pressure regulator of the PCP air rifle Walther LG 300 is designed for shooting with a power of 7.5J. With our rings, you can easily achieve an enlargement of the chamber and thus the possibility to set the power of the Walther LG 300 air...

View

Spare bearing for bipod TK3, TK4 and PRS

Spare bearing for bipod TK3, TK4 and PRS 2

Spare parts and accessories

Spare bearing for bipod TK3, TK4 and PRS

Replacement joint bearing of the Tactical EVO bipod model TK3, TK4 and PRS.

View

1
…
4
5
6
…
11

Product added to wishlist

Product added to compare.