TACTICAL EVO - Hlavní strana

Showing 25-48 of 132 item(s)

SWIVEL Modul

SWIVEL Modul 2

SPECIAL OFFERS

Adapter from SWIVEL system (screw with hole) to WEAVER

ACTION !!! DISCOUNT !!! VALID UNTIL SOLD OUT Used but 100% functional goods with a FULL WARRANTY. This is a new product (demonstration piece), which shows signs of slight wear. Universal adapter from the SWIVEL system (this is the screw with a hole that is usually used to fasten the belt) to the WEAVER system (picatinny rail). The reduction (adapter) is...

View

Riflescope HR 1.25-6x20 IR

Riflescope HR 1.25-6x20 IR 2

Optics

Riflescope HR 1.25-6x20 IR

The high-quality and very durable 30 mm tube is made from a single piece of aviation duralumin and is filled with nitrogen. Thanks to this, it has high mechanical resistance and does not fog. The lenses are coated with multi-layer anti-reflective protection, which guarantees a clean and clear image even in low light conditions.The eyepiece of the rifle...

View

Adjustable RECOIL PAD (universal)

Adjustable RECOIL PAD (universal) 2

Weapon accessories

Adjustable RECOIL PAD (universal)

The universal adjustable recoil pad mechanism is designed for all types of stocks. The adjustable mechanism of the recoil pad was developed with regard to the needs of shooters to easily and quickly change its settings.It is possible to use practically any rubber recoil pad that suits you on our height and length adjustable mechanics, or you can buy ATI...

View

Riflescope TF 4-16x44 AOIR

Riflescope TF 4-16x44 AOIR 2

Optics

Riflescope TF 4-16x44 AOIR

The high-quality and very durable 30 mm tube is made from a single piece of aviation duralumin and is filled with nitrogen. Thanks to this, it has high mechanical resistance and does not fog. The lenses are coated with multi-layer anti-reflective protection, which guarantees a clean and clear image even in low light conditions.The eyepiece of the rifle...

View

Fast Ammo 2 pin

Fast Ammo 2 pin 2

Weapon accessories

Fast Ammo 2 pin

Fast Ammo 2 is an easy way to refill your capacity and also to quickly reload your weapon. The tactical accessory is easy to install with a Velcro fastener. Fast Ammo 2 is designed for ammo from .223 through .308 to .338 calibre.

View

Riflescope EO 3-9x40 AOEG KN

Riflescope EO 3-9x40 AOEG KN 2

Optics

Riflescope EO 3-9x40 AOEG KN

The high-quality and very durable 25.4mm (1") tube is made from a single piece of aviation duralumin, which is filled with nitrogen. Thanks to this, it has high mechanical resistance and does not fog. The lenses are coated with multi-layer anti-reflective protection, which guarantees a clean and clear image even behind poor lighting conditions.The...

View

Fast Ammo 3 pin

Fast Ammo 3 pin 2

Weapon accessories

Fast Ammo 3 pin

Fast Ammo 3 is your easy way to refill capacity and also to quickly reload your weapon. The tactical accessory is easy to install via the Velcro fastener, which is included in the delivery and can also be ordered separately. The Fast Ammo 3 is designed for 3 extra ammo (from .223 through .308 to .338 calibre)

View

Riflescope SR 3-9x40 HK

Riflescope SR 3-9x40 HK 2

Optics

Riflescope SR 3-9x40 HK

The high-quality and very durable tube with a diameter of 25,4 (1") is made from a single piece of aviation duralumin and, thanks to this, has high mechanical resistance. The lenses are coated with green anti-reflective protection, which guarantees a clear image even in poor lighting conditions.The eyepiece of the rifle scope has an optical correction of...

View

Tuning trigger CZ SCORPION EVO 3

Tuning trigger CZ SCORPION EVO 3 2

Tuning

Tuning trigger CZ SCORPION EVO 3

The trigger is designed for all those who want to fit their weapon with something unconventional and exceptional. Installing the trigger is very easy, so you're done in minutes.The trigger is made of high quality material AW 7075 and the surface treatment is solved with black or red anodized.We recommend using it in combination with a tension lever of a...

View

Riflescope EO 4-16x44 AOEG

Riflescope EO 4-16x44 AOEG 2

Optics

Riflescope EO 4-16x44 AOEG

The high-quality and very durable 25.4mm (1") tube is made from a single piece of aviation duralumin, which is filled with nitrogen. Thanks to this, it has high mechanical resistance and does not fog. The lenses are coated with multi-layer anti-reflective protection, which guarantees a clean and clear image even behind poor lighting conditions.The...

View

Fuse cover for CZ SCORPION EVO 3

Fuse cover for CZ SCORPION EVO 3 2

Tuning

Safety cover for CZ SCORPION EVO 3

Safety cover for CZ SCORPION EVO 3.Are you not using the safety on the right or left side of the weapon? You can easily blind the unused side. Blinding an unused safety is very easy and you can handle it in a few seconds.

View

Riflescope CM 4-16x44 AOE

Riflescope CM 4-16x44 AOE 2

Optics

Riflescope CM 4-16x44 AOE

The high-quality and very durable 25.4mm (1") tube is made from a single piece of aviation duralumin, which is filled with nitrogen. Thanks to this, it has high mechanical resistance and does not fog. The lenses are coated with multi-layer anti-reflective protection, which guarantees a clean and clear image even behind The entire scope is made in a...

View

Insulation ring for CZ SCORPION EVO 3

Insulation ring for CZ SCORPION EVO 3 2

Tuning

Insulation ring for CZ SCORPION EVO 3

Insulation ring for CZ SCORPION EVO 3. The ring is made on CNC from a very high quality material AW 7075. The surface treatment is solved with black or red anodized.In the production documentation of CZ SCORPION EVO it is part no.5. The original part is made of plastic and after about 10,000 shots it breaks, thanks to which the forearm begins to move...

View

Tuning tension lever CZ SCORPION EVO 3

Tuning tension lever CZ SCORPION EVO 3 2

Tuning

Tuning charging handle CZ SCORPION EVO 3

Tuning charging handle for CZ SCORPION EVO 3. The charging handle is extended compared to the plastic original and its design corresponds to other tuning accessories for CZ SCORPION EVO 3, which we sell. Installing the charging handle is very easy, so you're done in minutes.The handle is made of high quality material AW 7075 and the surface treatment is...

View

Tunning trigger for CZ P-10 (red)

Tunning trigger for CZ P-10 (red) 2

Tuning

Tunning trigger for CZ P-10 (red)

Tuning trigger for CZ P-10 pistol. The trigger is made of high quality AW 7075 material and the surface treatment is solved with black or red anodized. Installation is easy, so you're done in minutes and your pistol gets an interesting design element.We recommend using it in combination with an extended magazine capture of a similar design.

View

Tunning trigger for CZ P-10 (black)

Tunning trigger for CZ P-10 (black) 2

Tuning

Tunning trigger for CZ P-10 (black)

Tuning trigger for CZ P-10 pistol. The trigger is made of high quality AW 7075 material and the surface treatment is solved with black or red anodized. Installation is easy, so you're done in minutes and your pistol gets an interesting design element.We recommend using it in combination with an extended magazine capture of a similar design.

View

Extended magazine catch CZ P-10

Extended magazine catch CZ P-10 2

Tuning

Extended magazine catch CZ P-10

Extended magazine catch CZ P-10. The catch is made of high quality AW 7075 material and the surface treatment is solved with black or red anodized. Installation is easy, so you are done in a few minutes and your pistol will get an interesting and above all functional design element.Designed for the version with a rotating catch. It doesn't work on the...

View

Stock screw SA 58 (vz 58, 585 and clones)

Stock screw SA 58 (vz 58, 585 and clones) 2

Tuning

Stock screw SA 58 (vz 58, 585 and clones)

Modernized version of the stock screw for SA 58 submachine gun (vz 58 and clones) on an Allen key. A big problem with the original screw, which has a classic "screw groove", is very complicated tightening or loosening of this screw. Either the screw cannot be tightened properly or, conversely, cannot be loosened. The stock screw we sell solves this...

View

Forehead breech for CZ P-10

Forehead breech for CZ P-10 2

Tuning

Forehead breech for CZ P-10

Dural breech for CZ P-10 pistol. Breech is made of high quality material AW 7075 and the surface treatment is solved with black or red anodized. Installation is easy, so you're done in minutes and your pistol gets a new and extraordinary dimension.It also works with the first generation pistol.

View

ARCA Swiss rail for M-LOK

ARCA Swiss rail for M-LOK 2

Weapon accessories

ARCA Swiss rail for M-LOK

The ARCA Swiss rail is a great addition to any rifle that has a chassis with an M-LOK clamping system. It can be used wherever the weapon uses a forend (chassis) with an M-LOK clamping system. A typical example is the weapons used for PRS shooting disciplines.This will give you a big advantage! You can easily move bipods or other accessories efficiently...

View

Trigger resistance spring CZ 557, 550 and 527

Tuning

Trigger resistance spring CZ 557, 550 and 527

Spring used to reduce the resistance of the trigger CZ 557, CZ 550, CZ 527 and increase its accuracy.Using the trigger spring, you can reduce the resistance of the trigger up to 0.5 kg.When the lowest trigger resistance is set, firing may occur when the weapon is unlocked! This fact must be taken into account! For the above reasons, we do not recommend...

View

CZ 457 trigger resistance springs

Tuning

CZ 457 trigger resistance springs

A set of springs used to reduce the resistance of the CZ 457 trigger and increase its accuracy.The set includes two springs, with the trigger spring reducing the factory resistance of the trigger by -50% and the impact spring, which has a 10% higher resistance. Using the trigger spring, you can reduce the trigger resistance to 0.5 kg.A stronger impact...

View

Trigger resistance spring TIKKA T3, T3x and T1x

Tuning

Trigger resistance spring TIKKA T3, T3x and T1x

Spring used to reduce the resistance of the trigger for TIKKA T3, T3x, T1x and increase its accuracy.Using the trigger spring, you can reduce the resistance of the trigger up to 0.5 kg. When the lowest trigger resistance is set, firing may occur when the weapon is unlocked! This fact must be taken into account! For the above reasons, we do not recommend...

View

Trigger resistance springs for CZ 455 / ZKM 452

Tuning

Trigger resistance springs for CZ 455 / ZKM 452

A set of springs used to reduce the resistance of the CZ 455 trigger from the factory 1.3 kg to 0.3 kg, according to your preferences. The strength of the trigger resistance is affected by more factors than just the force of the springs. Therefore, take the achievable resistance as a guide, it can vary by a few percent. The adjusting nuts on the spring...

View

1
2
3
…
6

Product added to wishlist

Product added to compare.