Tuning

It is obvious that manufacturers cannot incorporate all the tuning parts that customers want into their production programs. So in this section you will find tuning components that will help improve your beloved guns as you wish. At a basic level, we focus on products related to self-loading rifles SA 58 (vz 58, 585, etc.), repeating rifles CZ 457, CZ 455, CZ 557, Sig Sauer SSG 3000, semi auto CZ SCORPION EVO 3, CZ 9-10 and some others.

If you have a requirement for individual production of any interesting and meaningful accessory, do not hesitate to contact us.

You will not find a single part on our website that we would not personally try or were not 100% sure of. All our products are made of the best materials and with an absolute emphasis on quality! This way you can count on them to serve you well for many, many years.

Showing 1-22 of 22 item(s)

Browning X-BOLT trigger resistance spring

Tuning

Browning X-BOLT trigger resistance spring

Spring used to reduce the resistance of the trigger Browning X-BOLT and increase its accuracy.Using the trigger spring, you can reduce the resistance of the trigger up to 0.5 kg.When the lowest trigger resistance is set, firing may occur when the weapon is unlocked! This fact must be taken into account! For the above reasons, we do not recommend setting...

View

Muzzle brake CZ SCORPION EVO 3 (M18x1)

Muzzle brake CZ SCORPION EVO 3 (M18x1) 2

Muzzle brake and compensator

Muzzle brake CZ SCORPION EVO 3 (M18x1)

Muzzle brake SAR2 for CZ SCORPION EVO 3 is a highly effective three-chamber brake with an exhaust channel preventing the side bounce of the weapon. Its chambers are designed so that there is no negative exhaust of post-firing gases towards the shooter. Of the technical parameters, it is definitely worth mentioning the easy installation, locking the brake...

View

Weaver mounting on SA 58 (vz.58) with stock in IN-LINE...

Weaver mounting on SA 58 (vz.58) with stock in IN-LINE... 2

Submachine gun SA 58 (vz 58, 585 etc.)

Weaver mounting on SA 58 (vz.58) with stock in IN-LINE design

Weaver mounting on SA submachine gun vz. 58 is currently a necessary accessory for every shooter who is really serious about shooting from this iconic Czechoslovak self-loading assault rifle. Submachine gun vz. 58 was a great weapon for its time and for its design qualities it serves in the armed forces to this day. As for its popularity among civilian...

View

Alignment Adapter for SA 58 (vz.58)

Alignment Adapter for SA 58 (vz.58) 2

Submachine gun SA 58 (vz 58, 585 etc.)

Alignment Adapter for SA 58 (vz.58)

The vz. 58 submachine gun was an excellent weapon for its time, and due to its design qualities, it is still in use by armed forces today. As for its popularity among civilian shooters, there's no need to elaborate extensively—nearly everyone knows it. Given its year of origin, the biggest design drawbacks of this weapon are the inability to mount optics...

View

Muzzle brake CZ SCORPION EVO3 (CERAKOTE, M18x1)

Muzzle brake CZ SCORPION EVO3 (CERAKOTE, M18x1) 2

Muzzle brake and compensator

Muzzle brake CZ SCORPION EVO3 (CERAKOTE, M18x1)

The SAR2 muzzle brake for the CZ SCORPION EVO 3 is a highly effective three-chamber brake with an exhaust channel preventing the weapon from bouncing sideways. Its chambers are designed so that there is no negative exhaust of post-firing gases towards the shooter. Of the technical parameters, it is definitely worth mentioning the easy installation,...

View

Adjustable RECOIL PAD (universal)

Adjustable RECOIL PAD (universal) 2

Weapon accessories

Adjustable RECOIL PAD (universal)

The universal adjustable recoil pad mechanism is designed for all types of stocks. The adjustable mechanism of the recoil pad was developed with regard to the needs of shooters to easily and quickly change its settings.It is possible to use practically any rubber recoil pad that suits you on our height and length adjustable mechanics, or you can buy ATI...

View

Muzzle brake F1 PRO for CZ SCORPION (M18x1)

Muzzle brake F1 PRO for CZ SCORPION (M18x1) 2

Muzzle brake and compensator

Muzzle brake F1 PRO for CZ SCORPION (M18x1)

The F1 PRO muzzle brake for CZ SCORPION EVO 3 is a highly effective five-chamber brake with an exhaust channel that prevents the weapon from bouncing sideways. Its chambers are designed to not only extremely dampen the recoil and lateral rebound of the weapon, but also prevent its vertical rebound.Of the technical parameters, it is definitely worth...

View

IN-LINE Buttstock reduction for SA vz.58

IN-LINE Buttstock reduction for SA vz.58 2

Submachine gun SA 58 (vz 58, 585 etc.)

IN-LINE Buttstock reduction for SA vz.58

Weaver mounting buttstock reduction system for SA vz. 58 and its clones. This reduction is designed specifically to use with our product: Weaver mount for SA vz. 58 and will allow you to quickly change the lock system of your buttstock. Available variants are mounting locks for FAB Defense, AR-style buffer, Zhukov Yugo style, or the original wooden and...

View

Buttstock cover (genuine leather)

Buttstock cover (genuine leather) 2

Weapon accessories

Buttstock cover (genuine leather)

Additional cheekpiece for the stock. The cheekpiece is very well made, it is sewn from genuine leather and it can be easily and quickly attached to any classic stock. Attachment to the stock is done with Velcro. Variability is ensured by several foam pads, thanks to which you can easily achieve an additional increase of the cheek by approximately 20 mm...

View

Carbon rods for our LUXURY weapon wiper

Weapon accessories

Carbon rods for our LUXURY weapon wiper

Carbon rods for our LUXURY weapon wiper. We supply carbon rods in diameters of 4, 5, 6, 7, 8 and 10 mm and in lengths of 350, 450, 550, 650, 750, 850, 950 and 1050 mm. So all you need to clean your weapons is a handle, and you put carbon rods in it as you see fit. Replacing one rod with another does not take more than 1 second!The thread at the end of the...

View

Weapon wiper for all calibers

Weapon wiper for all calibers 2

Weapon accessories

Weapon wiper for all calibers

View

Muzzle brake F1 PRO for CZ SCORPION (CERAKOTE, M18x1)

Muzzle brake F1 PRO for CZ SCORPION (CERAKOTE, M18x1) 2

Muzzle brake and compensator

Muzzle brake F1 PRO for CZ SCORPION (CERAKOTE, M18x1)

The F1 PRO muzzle brake for CZ SCORPION EVO 3 is a highly effective five-chamber brake with an exhaust channel that prevents the weapon from bouncing sideways. Its chambers are designed to not only extremely dampen the recoil and lateral rebound of the weapon, but also prevent its vertical rebound.Of the technical parameters, it is definitely worth...

View

Stock screw SA 58 (vz 58, 585 and clones)

Stock screw SA 58 (vz 58, 585 and clones) 2

Tuning

Stock screw SA 58 (vz 58, 585 and clones)

Modernized version of the stock screw for SA 58 submachine gun (vz 58 and clones) on an Allen key. A big problem with the original screw, which has a classic "screw groove", is very complicated tightening or loosening of this screw. Either the screw cannot be tightened properly or, conversely, cannot be loosened. The stock screw we sell solves this...

View

High-Quality Oil Not Only for Firearms: Interflon Fin Super Dry Lube

High-Quality Oil Not Only for Firearms: Interflon Fin Super Dry Lube 2

Weapon accessories

High-Quality Oil Not Only for Firearms: Interflon Fin Super Dry Lube

Multi-purpose oil not only for firearms, which cleans, lubricates, preserves, and protects against oxidation.Lubricating oil with MicPol® sliding particles that provides high penetration for long-lasting lubrication. This is a high-quality multi-purpose oil for firearms, ammunition, and equipment that cleans, lubricates, preserves, and protects against...

View

Muzzle brake PCC for CZ SCORPION EVO CARABINE (1/2x28UNF))

Muzzle brake PCC for CZ SCORPION EVO CARABINE (1/2x28UNF)) 2

Muzzle brake and compensator

Muzzle brake PCC for CZ SCORPION EVO CARABINE (1/2x28UNF))

The PCC muzzle brake is designed for the CZ SCORPION EVO CARABINE and not only compensates for recoil and shot, but also prevents the weapon from bouncing after the shot.The muzzle brake is a device that eliminates the negative effects of forces acting on the shooter and the weapon after the shot. It changes the flow direction of the gases escaping from...

View

Weight 170g with MLOK Mounting System

Weight 170g with MLOK Mounting System 2

Tuning

Weight 170g with MLOK Mounting System

This 170g weight is designed for attachment to any stock equipped with the MLOK mounting system (e.g., MDT stock). Available in various colors, there's an option for everyone.

View

Trigger resistance springs for CZ SCORPION EVO

Tuning

Trigger resistance springs for CZ SCORPION EVO

A set of springs used to reduce the resistance of the trigger from the factory 5kg to 2.5kg. The CZ SCORPION EVO 3 weapon is designed from the ground up as a service weapon, and for this reason the resistance of the trigger and its characteristics are designed to maintain shooting safety even in crisis situations and shooting in gloves. During the...

View

Weight 280g with MLOK Mounting System

Weight 280g with MLOK Mounting System 2

Tuning

Weight 280g with MLOK Mounting System

This 280g weight is designed for attachment to any stock equipped with the MLOK mounting system (e.g., MDT stock). Available in various colors, there's an option for everyone.

View

Tuning trigger CZ SCORPION EVO 3

Tuning trigger CZ SCORPION EVO 3 2

Tuning

Tuning trigger CZ SCORPION EVO 3

The trigger is designed for all those who want to fit their weapon with something unconventional and exceptional. Installing the trigger is very easy, so you're done in minutes.The trigger is made of high quality material AW 7075 and the surface treatment is solved with black or red anodized.We recommend using it in combination with a tension lever of a...

View

Insulation ring for CZ SCORPION EVO 3

Insulation ring for CZ SCORPION EVO 3 2

Tuning

Insulation ring for CZ SCORPION EVO 3

Insulation ring for CZ SCORPION EVO 3. The ring is made on CNC from a very high quality material AW 7075. The surface treatment is solved with black or red anodized.In the production documentation of CZ SCORPION EVO it is part no.5. The original part is made of plastic and after about 10,000 shots it breaks, thanks to which the forearm begins to move...

View

Tuning tension lever CZ SCORPION EVO 3

Tuning tension lever CZ SCORPION EVO 3 2

Tuning

Tuning charging handle CZ SCORPION EVO 3

Tuning charging handle for CZ SCORPION EVO 3. The charging handle is extended compared to the plastic original and its design corresponds to other tuning accessories for CZ SCORPION EVO 3, which we sell. Installing the charging handle is very easy, so you're done in minutes.The handle is made of high quality material AW 7075 and the surface treatment is...

View

Fuse cover for CZ SCORPION EVO 3

Fuse cover for CZ SCORPION EVO 3 2

Tuning

Safety cover for CZ SCORPION EVO 3

Safety cover for CZ SCORPION EVO 3.Are you not using the safety on the right or left side of the weapon? You can easily blind the unused side. Blinding an unused safety is very easy and you can handle it in a few seconds.

View

Product added to wishlist

Product added to compare.